This project has retired. For details please refer to its Attic page.
Messages Guide

License Statement

Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Revision History

Version Date

2.0.0

To be announced.

1.3.0

January, 2016

1. About This Document

Trafodion is a relational database management system based on ANSI SQL. It uses the industry standard Structured Query Language (SQL) to define and manipulate data. This manual describes messages produced by the Trafodion SQL engine and its associated components.

1.1. Intended Audience

This manual was written for Trafodion database administrators and programmers who use the Trafodion database software conversational or programmatic interface.

1.2. New and Changed Information

This is a new manual.

1.3. Notation Conventions

This list summarizes the notation conventions for syntax presentation in this manual.

  • UPPERCASE LETTERS

    Uppercase letters indicate keywords and reserved words. Type these items exactly as shown. Items not enclosed in brackets are required.

    SELECT
  • lowercase letters

    Lowercase letters, regardless of font, indicate variable items that you supply. Items not enclosed in brackets are required.

    file-name
  • [ ] Brackets

    Brackets enclose optional syntax items.

    DATETIME [start-field TO] end-field

    A group of items enclosed in brackets is a list from which you can choose one item or none.

    The items in the list can be arranged either vertically, with aligned brackets on each side of the list, or horizontally, enclosed in a pair of brackets and separated by vertical lines.

    For example:

    DROP SCHEMA schema [CASCADE]
    DROP SCHEMA schema [ CASCADE | RESTRICT ]
  • { } Braces

    Braces enclose required syntax items.

    FROM { grantee [, grantee ] ... }

    A group of items enclosed in braces is a list from which you are required to choose one item.

    The items in the list can be arranged either vertically, with aligned braces on each side of the list, or horizontally, enclosed in a pair of braces and separated by vertical lines.

    For example:

    INTERVAL { start-field TO end-field }
    { single-field }
    INTERVAL { start-field TO end-field | single-field }
  • | Vertical Line

    A vertical line separates alternatives in a horizontal list that is enclosed in brackets or braces.

    {expression | NULL}
  • … Ellipsis

    An ellipsis immediately following a pair of brackets or braces indicates that you can repeat the enclosed sequence of syntax items any number of times.

    ATTRIBUTE[S] attribute [, attribute] ...
    {, sql-expression } ...

    An ellipsis immediately following a single syntax item indicates that you can repeat that syntax item any number of times.

    For example:

    expression-n ...
  • Punctuation

    Parentheses, commas, semicolons, and other symbols not previously described must be typed as shown.

    DAY (datetime-expression)
    @script-file

    Quotation marks around a symbol such as a bracket or brace indicate the symbol is a required character that you must type as shown.

    For example:

    "{" module-name [, module-name] ... "}"
  • Item Spacing

    Spaces shown between items are required unless one of the items is a punctuation symbol such as a parenthesis or a comma.

    DAY (datetime-expression) DAY(datetime-expression)

    If there is no space between two items, spaces are not permitted. In this example, no spaces are permitted between the period and any other items:

    myfile.sh
  • Line Spacing

    If the syntax of a command is too long to fit on a single line, each continuation line is indented three spaces and is separated from the preceding line by a blank line.

    This spacing distinguishes items in a continuation line from items in a vertical list of selections.

    match-value [NOT] LIKE _pattern
       [ESCAPE esc-char-expression]

1.4. Comments Encouraged

We encourage your comments concerning this document. We are committed to providing documentation that meets your needs. Send any errors found, suggestions for improvement, or compliments to user@trafodion.incubator.apache.org.

Include the document title and any comment, error found, or suggestion for improvement you have concerning this document.

2. Introduction

2.1. Message Handling

Trafodion reports exception condition messages at a Trafodion Database Connectivity Service conversational interface (DCS) window and in the Trafodion Command Interface (TrafCI).

Most Trafodion exception condition messages describe error conditions for which recovery action is required. Some messages are warnings that provide information for which no action is required.

Error messages that appear in response to SQL commands are logged to the DCS application’s log file if you have used the LOG command to request them.

The format of a Trafodion error is "* ERROR" followed by the error number in brackets, and the descriptive text. Use the error number shown to find information about a particular error in this manual. For example, information for Trafodion error 1125 can be found under "SQL 1125."

Messages are listed in this manual in numeric order, broken down by the component that produced them.

2.2. Viewing Trafodion Database Messages

The message key is a sequential SQL message number that is returned automatically by Trafodion when an exception condition occurs. For example, the following message might be displayed within your application development tool while you prepare an embedded SQL program:

*** ERROR[1000] A syntax error occurred.

This message number is the SQLCODE value (without the sign). In this manual, you will find the following message information for ERROR[1000]:

SQL 1000

1000 A syntax error occurred.

Cause: You specified a statement with incorrect syntax.

Effect: The Trafodion statement fails.

Recovery: Correct the syntax and resubmit.

2.3. SQLSTATE and SQLCODE

SQLSTATE and SQLCODE status codes are returned to indicate either that an SQL statement completed successfully or that an exception condition was raised during execution of an SQL statement.

The ANSI SQL SQLSTATE variable is a five-character string with a two-character class code followed by a three-character subclass code. An SQLSTATE value of 00000 indicates successful completion.

Trafodion extends the ANSI SQL SQLSTATE values to include other situations not described by the ANSI values. If an ANSI SQL SQLSTATE value exists for an error condition, the Trafodion database software returns that value. Otherwise, Trafodion returns an SQLSTATE value that is defined by the Trafodion database software.

Trafodion also returns a numeric SQLCODE value after SQL statement execution. SQLCODE values with negative numbers signify errors.

SQLCODE values with positive numbers other than 0 (successful completion) or 100 (no data was found) signify warning messages. Trafodion identifies all messages by their unsigned SQLCODE value and their calculated SQLSTATE value. The SQLCODE is used to calculate the SQLSTATE value for all Trafodion messages other than those for which an ANSI SQL SQLSTATE value exists.

The SQLCODE parameter is a deprecated feature that is supported to maintain compatibility with earlier versions of the American standard.

SQLSTATE Values identifies the equivalent SQLSTATE and SQLCODE values for Trafodion warning and error messages.

2.4. Getting Help

Some messages have no recovery and you will be instructed to contact user@trafodion.incubator.apache.org.

3. Data Definition Language (DDL) Messages (1000 through 1999)

3.1. SQL 1002

Catalog <catalog> does not exist or has not been registered on node <node>.

Where <catalog> is the ANSI name of the target catalog.

Where <node> is the node where the process executes.

Cause: The catalog is not visible on the local node, either because it does not exist or because it exists elsewhere on the network but has not been registered on the local node.

Effect: The operation fails.

Recovery: Enter a valid catalog name (or register the catalog on the node indicated) and resubmit.

3.2. SQL 1003

Schema <schema> does not exist.

Where <schema> is the ANSI name of the affected schema.

Cause: In a replication context: a REPLICATION SCHEMA operation specified a schema that does not exist.

Effect: The operation fails.

Recovery: Check that a schema named <schema> does exist and resubmit.

3.3. SQL 1004

Table, view, or stored procedure <object-name> does not exist or object type is invalid for the current operation.

Where <object-name> is the name of a Trafodion database object.

Cause: You attempted an operation on an object that does not exist.

Effect: The operation fails.

Recovery: Check that an object named <object-name> does exist. If you did not fully qualify the name, check that the defaults generate the correct fully qualified name and resubmit.

3.4. SQL 1005

Constraint <constraint-name> does not exist.

Where <constraint-name> is the name of a column constraint or table constraint.

Cause: The ALTER TABLE statement you attempted requires the existence of a constraint named <constraint-name>.

Effect: The operation fails.

Recovery: Check that a constraint named <constraint-name> exists for the table specified. You can use the SHOWDDL command to find the names of the constraints that exist on a table.

3.5. SQL 1006

Index <index-name> does not exist.

Where <index-name> is a Trafodion database object name.

Cause: The operation you attempted requires the existence of an index named <index-name>.

Effect: The operation fails.

Recovery: Check that an index named <index-name> does exist. If you did not fully qualify the name, check that the defaults generate the correct qualified name.

3.6. SQL 1008

User name <user-name> does not exist.

Where <user-name> is a Trafodion platform user name.

Cause: The user name specified in a GRANT or REVOKE statement, or the authorization ID in a CREATE SCHEMA statement, does not represent a valid Trafodion platform user.

Effect: The operation fails.

Recovery: Correct the user name and resubmit.

3.7. SQL 1009

Column <column-name> does not exist in the specified table.

Where <column-name> is an SQL identifier.

Cause: The table that is referenced does not have a column with this name.

Effect: The operation fails.

Recovery: Replace either the name of the table or the name of the column (whichever is incorrect) and resubmit.

3.8. SQL 1010

The statement just specified is currently not supported.

Cause: The statement that you specified is not available for use.

Effect: The operation fails.

Recovery: Do not attempt to use this Trafodion database statement.

3.9. SQL 1012

No privileges were granted. You lack grant option on the specified privileges.

Cause: You attempted to grant privileges for which you do not have grant options.

Effect: No privileges are granted.

Recovery: You must have grant options for privileges to grant them.

3.10. SQL 1013

Not all privileges were granted. You lack grant option on some of the specified privileges.

Cause: You attempted to grant privileges, but you do not have grant options for at least one of them.

Effect: The Trafodion database granted some privileges, but not all that you attempted to grant.

Recovery: You must have grant options for privileges to grant them.

3.11. SQL 1014

Privileges were not revoked. Dependent privilege descriptors still exist.

Cause: You attempted to revoke a privilege for a user who has granted privileges to another user. Privileges must be revoked in reverse order from how they were granted. If you perform a grant to another user who then performs a grant to a third user, you cannot revoke privileges to the second user until that user revokes their privileges to the third user.

Effect: The Trafodion database did not revoke the privileges.

Recovery: Make sure that the dependent privileges from the user whose privileges you want to revoke are revoked first.

3.12. SQL 1015

Some of the specified privileges could not be revoked.

Cause: You attempted to revoke a privilege that does not exist or that was granted by another user.

Effect: The Trafodion database did not revoke the privileges.

Recovery: The user who granted the privileges must revoke them.

3.13. SQL 1016

Redundant references to column <column-name> were specified in the constraint or trigger definition.

Where <column-name> is an SQL identifier.

Cause: You created a constraint with multiple references to <column-name>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

3.14. SQL 1017

You are not authorized to perform this operation.

Cause: You attempted a replication operation without proper authorization.

Effect: The operation fails.

Recovery: In a replication context: Only the catalog owner and the local super ID can perform a replication operation for a catalog and for multiple schemas in a single catalog. Additionally, the schema owner can perform a replication operation for a single schema.

3.15. SQL 1020

Privilege settings on metadata tables cannot be changed.

Cause: You attempted to change privilege settings on a metadata table. They cannot be changed.

Effect: Trafodion does not change the settings.

Recovery: None.

3.16. SQL 1021

SQL is already initialized on system <node-name>.

Where <node-name> is the name of the system on which the INITIALIZE SQL statement was executed.

Cause: The Trafodion database has already been initialized on this node.

Effect: No operation is performed.

Recovery: None needed if SQL is operating normally.

3.17. SQL 1022

Schema <schema-name> already exists.

Where <schema-name> is the name of a Trafodion database schema.

Cause: You attempted to create a schema in a catalog that already contains a schema with that name.

Effect: The operation fails.

Recovery: If you did not use a fully qualified name, check that the default generates the correct catalog name. Retry the request, specifying a schema that does not already exist.

3.18. SQL 1023

Only services ID can name an authorization ID other than the current user name.

Cause: You attempted to create a schema with the authorization ID of another user. Only the services ID can do this.

Effect: The operation fails.

Recovery: Use the services ID to create a schema with another owner.

3.19. SQL 1024

File system error <error-number> occurred on <text-string-1> <text-string-2>.

Where <error-number> is an error originating from the file system.

Where <text-string-1> is the file name.

Where <text-string-2> is (optionally) additional details about the error.

Cause: Look up this error number in the file system manual to determine the cause.

Effect: The operation fails.

Recovery: For information about file system errors, see File-System Errors.

3.20. SQL 1025

Request failed. One or more dependent objects exist.

Cause: This error can occur when you drop a constraint, index, or table. These objects cannot be dropped if they have dependent objects and the drop-behavior is RESTRICT.

Effect: Trafodion does not perform the operation.

Recovery: For DROP statements that support the CASCADE drop-behavior, you can reissue the statement specifying CASCADE. For other DROP statements, you must first drop each of the dependent objects, then drop the object.

3.21. SQL 1026

Only the schema owner or services ID can drop a schema.

Cause: An attempt was made to drop a schema by someone other than its owner or the services ID.

Effect: No SQL objects are dropped.

Recovery: The owner of the schema (or services ID) needs to issue the DROP SCHEMA statement.

3.22. SQL 1027

The definition schema <definition-schema-name> is dropped when its catalog is dropped.

Where <definition-schema-name> is the name of the definition schema specified.

Cause: You attempted to drop the schema containing the metadata tables for the catalog.

Effect: No SQL objects are dropped.

Recovery: Use DROP SCHEMA statements to drop all the user-created schemas in the catalog. Then use the DROP CATALOG statement to drop the catalog. The schema <definition-schema-name> is dropped when you drop its catalog.

3.23. SQL 1028

The schema must be empty. It contains at least one object <object-name>.

Where <object-name> is the name of a Trafodion database object existing in the schema.

Cause: You attempted to drop a schema that contains one or more objects.

Effect: The schema is not dropped.

Recovery: Either drop all the objects in <schema-name> and resubmit the statement, or resubmit the drop statement using the CASCADE option.

3.24. SQL 1029

Object <object-name> could not be created.

Where <object-name> is the name supplied in a CREATE statement.

Cause: This error can result from various CREATE statements. See the accompanying error messages to determine the cause.

Effect: The object is not created.

Recovery: Apply the recovery of the accompanying error messages.

3.25. SQL 1030

File label <file-name> could not be accessed. File system error <error>.

Where <file-name> is the name of a Trafodion database file.

Where <error> is a file system error number.

Cause: See the accompanying error message for the cause.

Effect: The operation fails.

Recovery: For information about file system errors, see File-System Errors.

3.26. SQL 1031

Object <object-name> could not be dropped.

Where <object-name> is the SQL object.

Cause: See the accompanying error message for the cause.

Effect: Trafodion does not drop the object.

Recovery: Apply the recovery of the accompanying error message.

3.27. SQL 1035

Catalog <catalog-name> already exists.

Where <catalog-name> is the name of a Trafodion database catalog.

Cause: You attempted to create a catalog using the name of an already existing catalog.

Effect: The operation fails.

Recovery: None if this is the desired catalog. Otherwise, correct the catalog name and resubmit.

3.28. SQL 1036

Only super ID can execute DROP SQL.

Cause: An attempt was made to drop SQL by a user who is not the super ID.

Effect: The operation fails.

Recovery: The super ID needs to issue the DROP SCHEMA statement.

3.29. SQL 1037

{project-name} is not installed on system <node>.

Where <node> is the name of the node referenced by the operation.

Cause: In a replication or distribution context: An operation attempted to create a catalog reference or a partition on a node where the Trafodion database has not been installed.

Effect: The operation fails.

Recovery: Either reissue the statement specifying a different node, or install the Trafodion database on <node> and resubmit.

3.30. SQL 1038

Not all user catalogs have been dropped from the system.

Cause: You attempted to drop SQL while one or more user-created catalogs existed.

Effect: The operation fails.

Recovery: You must drop all user-created catalogs before dropping SQL.

3.31. SQL 1039

The DROP SQL statement could not be executed.

Cause: See the accompanying error message for the cause.

Effect: Trafodion does not drop SQL.

Recovery: Apply the recovery of the accompanying error message.

3.32. SQL 1040

The use of ALTER on metadata tables is not permitted.

Cause: An ALTER TABLE statement was issued naming a table that is part of the Trafodion database metadata. Such tables cannot be altered.

Effect: The operation fails.

Recovery: None.

3.33. SQL 1041

The primary key has already been defined.

Cause: You attempted to add a primary key to a table that already has a primary key.

Effect: The operation fails.

Recovery: None.

3.34. SQL 1042

All PRIMARY KEY or UNIQUE constraint columns must be NOT NULL.

Cause: You did not specify NOT NULL on one or more columns that are included in a UNIQUE or PRIMARY KEY constraint.

Effect: The operation fails.

Recovery: Reissue the statement with NOT NULL specified for all columns that are in the PRIMARY KEY and UNIQUE constraints.

3.35. SQL 1043

Constraint <constraint-name> already exists.

Where <constraint-name> is the name of a column constraint or table constraint.

Cause: You assigned the same constraint name to two constraints on the same table. Constraint names must be unique among all the constraints for a table.

Effect: The operation fails.

Recovery: Make all the constraint names for the table unique. Use SHOWDDL to see the names of existing constraints.

3.36. SQL 1044

Constraint <constraint-name> could not be created because the referenced columns in the referenced table are not part of a unique constraint.

Where <constraint-name> is the name of a column constraint or table constraint.

Cause: The columns that <constraint-name> references in the referenced table are not part of a unique constraint.

Effect: The operation fails.

Recovery: Check that <constraint-name> references a unique or primary constraint in the referenced table.

3.37. SQL 1045

The unique constraint cannot be used because it is deferrable.

Cause: The referential constraint is referencing the unique constraint that is declared as deferrable. This is an internal error.

Effect: The operation fails.

Recovery: Check that the referential constraint references a unique constraint that is not declared deferrable. Contact the Trafodion User Distribution List

3.38. SQL 1046

Referenced and referencing column lists do not match for constraint <constraint-name>.

Where <constraint-name> is the name of a column constraint or table constraint.

Cause: The list of referencing columns in <constraint-name> does not match the list of unique key columns that it is referencing.

Effect: The operation fails.

Recovery: Check that the <constraint-name> list of referencing columns matches the list of referenced columns.

3.39. SQL 1047

Request failed. Dependent view <view-name> exists.

Where <view-name> is the name of the view on the object being dropped.

Cause: An object that has a dependent view cannot be dropped unless you use the CASCADE option on the DROP statement.

Effect: The operation fails.

Recovery: To drop the object and all its dependent objects, you can either drop each of the dependent objects using individual DROP statements before dropping the object itself, or use the CASCADE clause on the DROP statement for the object.

3.40. SQL 1048

The statement currently supports only RESTRICT drop behavior.

Cause: Drop behavior CASCADE was specified on a DROP statement that supports only RESTRICT drop behavior.

Effect: The operation fails.

Recovery: Reissue the DROP statement, specifying RESTRICT or omitting the drop behavior (which will default to RESTRICT).

3.41. SQL 1049

Constraint cannot be dropped because it was specified to be NOT DROPPABLE.

Cause: You attempted to drop a constraint that is NOT DROPPABLE.

Effect: The operation fails.

Recovery: None.

3.42. SQL 1050

Constraint cannot be dropped because it is used as a referenced object for a foreign key.

Cause: You attempted to drop a unique or primary constraint, with dependent referential constraints, using the RESTRICT option, which does not remove such constraints.

Effect: The drop command fails.

Recovery: If you want to drop the dependent referential constraints, use the CASCADE option for the DROP CONSTRAINT command.

3.43. SQL 1051

You do not have the required privilege(s) on <object-name>.

Where <object-name> is the name of the object for which you have insufficient privileges.

Cause: You have insufficient privileges to create a view or a trigger.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for the required security needed to create a view or trigger.

3.44. SQL 1053

Unique index <index-name> could not be created because the specified column(s) contain duplicate data.

Where <index-name> is the name specified for the index to create.

Cause: The rows already existing in the table violate the uniqueness constraint specified in the CREATE INDEX statement.

Effect: The index is not created.

Recovery: Either change the list of columns for the unique index, or change the rows in the table to remove duplicates. Then reissue the statement.

3.45. SQL 1057

{project-name} objects cannot be created on <volume-name>: File system error <error-number>.

Where <volume-name> is the name of a volume.

Where <error-number> is the file system error number.

Cause: An attempt to create a file on volume <volume-name> resulted in file system error <error-number>.

Effect: The operation fails.

Recovery: For information about file system errors, see File-System Errors.

3.46. SQL 1058

Lock <lock-name> already exists.

Where <lock-name> is the name of the DDL lock.

Cause: The statement required creation of a lock with a unique lock name, which was not generated.

Effect: The operation fails.

Recovery: Specify a unique lock name and resubmit.

3.47. SQL 1059

Request failed. Dependent constraint <constraint-name> exists.

Where <constraint-name> is the name of a column constraint or table constraint.

Cause: You attempted to drop a table that has a referential constraint or a check constraint that refers to another table.

Effect: Trafodion does not drop the table.

Recovery: Either drop all constraints that refer to other tables and then drop the table, or reissue the DROP TABLE statement, specifying the CASCADE option.

3.48. SQL 1061

Dropping metadata catalog <catalog-name> is not allowed.

Where <catalog-name> is the name of a Trafodion database catalog.

Cause: You attempted to drop a catalog that is part of the Trafodion database metadata.

Effect: The operation fails.

Recovery: None.

3.49. SQL 1062

Dropping metadata schema <schema-name> is not allowed.

Where <schema-name> is the name of a Trafodion database metadata schema.

Cause: You attempted to drop a schema that is part of the Trafodion database metadata.

Effect: The operation fails.

Recovery: None.

3.50. SQL 1063

Dropping metadata index <index-name> is not allowed.

Where <index-name> is the name of a Trafodion database index.

Cause: An attempt was made to drop an index that is part of the Trafodion database metadata.

Effect: The operation fails.

Recovery: None.

3.51. SQL 1064

Dropping metadata view <table-name> is not allowed.

Where <table-name> is the name of a Trafodion database table.

Cause: An attempt was made to drop a view that is a metadata object. Metadata views and their creation are not currently supported, so this error should not be encountered.

Effect: The operation fails.

Recovery: None.

3.52. SQL 1065

Creating constraint <constraint-name> in metadata schema is not allowed.

Where <constraint-name> is the name of the constraint.

Cause: You attempted to create a constraint on a metadata table, which is not allowed.

Effect: The operation fails.

Recovery: None.

3.53. SQL 1066

Creating index <index-name> in metadata schema is not allowed.

Where <index-name> is the name specified for the index.

Cause: You attempted to create an index on a metadata table, which is not allowed.

Effect: The operation fails.

Recovery: None.

3.54. SQL 1069

Schema <schema-name> could not be dropped.

Where <schema-name> is the name of a Trafodion database schema.

Cause: See the accompanying error message for the cause of the problem.

Effect: The operation fails.

Recovery: Apply the recovery action from the accompanying error message.

3.55. SQL 1070

Object <object-name> could not be created. File error: <error-number>.

Where <object-name> is the name of the Trafodion database object.

Where <error-number> is the file system error number.

Cause: An attempt to create object <object-name> resulted in file system error <error-number>.

Effect: The operation fails.

Recovery: For information about file system errors, see File-System Errors.

3.56. SQL 1071

Object <ANSI-name> could not be accessed.

Where <ANSI-name> is the name of the Trafodion database object.

Cause: The statement issued required access to the Trafodion platform file underlying object <ANSI-name>.

Effect: The operation fails.

Recovery: Apply the recovery action from the accompanying error message.

3.57. SQL 1072

Unique constraint <constraint-name-1> is disabled, so foreign key constraint <constraint-name-2> could not be created.

Where <constraint-name-1> is the name of the disabled constraint.

Where <constraint-name-2> is the name of the foreign key constraint.

Cause: You created a referential constraint that references a unique constraint that has been disabled. This is an internal error.

Effect: The operation fails.

Recovery: Create the referential constraint that references a unique constraint that has not been disabled.

3.58. SQL 1073

Only services ID can execute INITIALIZE SQL.

Cause: You attempted to initialize the Trafodion database, but you are not the services ID. Only the services ID can perform this function.

Effect: The operation fails.

Recovery: Log on as the services ID before executing this command.

3.59. SQL 1075

The catalog must be empty. It contains at least one schema <schema-name>.

Where <schema-name> is the name of a schema in the specified catalog.

Cause: An attempt was made to drop a catalog that is not empty.

Effect: The catalog is not dropped. None of its schemas are dropped.

Recovery: Drop all schemas in the catalog and resubmit.

Recovery: None. Contact the Trafodion User Distribution List

3.60. SQL 1078

The format of the specified location name <location-name> is not valid.

Where <location-name> is a name specified in a LOCATION clause.

Cause: An invalid name was supplied in a LOCATION clause.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for limitations on names allowed in the LOCATION clause. Correct the name and resubmit.

3.61. SQL 1079

{project-name} was not able to prepare the statement.

Cause: See the accompanying error message for the cause.

Effect: The operation fails.

Recovery: Apply the recovery of the accompanying error message.

3.62. SQL 1080

The create request has duplicate references to column <column-name>.

Where <column-name> is the name of a column of a table.

Cause: You attempted to create a table that has two columns with the same name. If you name a column "SYSKEY," duplication can result from the implicit creation by the Trafodion database software of a column named SYSKEY to ensure uniqueness for the clustering key.

Effect: The operation fails.

Recovery: Remove duplicate column names and resubmit.

3.63. SQL 1081

Loading of index <index-name> failed unexpectedly.

Where <index-name> is the name of the index being populated.

Cause: Population of the index failed, either because another concurrent operation was being performed on the base table or because data could not be loaded into the index by the Call-level interface (CLI).

Effect: The operation fails.

Recovery: Determine the cause of the CLI failure and resubmit.

3.64. SQL 1082

Validation for constraint <constraint-name> failed unexpectedly.

Where <constraint-name> is the name of a column or table constraint.

Cause: The constraint validation failed, either because a concurrent operation was being performed on the table or on the referenced table (for a referential integrity constraint), or data in the table violates the constraint.

Effect: The constraint operation fails.

Recovery: If a concurrent operation is in progress, wait until it has finished and try the operation again. If data in the table violates the constraint, remove that data and resubmit.

3.65. SQL 1083

Validation for constraint <constraint-name> failed; incompatible data exists in table.

Where <constraint-name> is the name of a column or table constraint.

Cause: Data in the table violates the check constraint.

Effect: The constraint operation fails.

Recovery: Remove data that violates the constraint from the table and resubmit.

3.66. SQL 1084

An invalid default value was specified for column <column-name>.

Where <column-name> is the specified column.

Cause: An invalid default value was specified in the column definition for <column-name>.

Effect: Creation of the table or addition of the column fails.

Recovery: Specify a valid default value for the column and resubmit.

3.67. SQL 1085

The calculated key length is greater than 255 bytes.

Cause: The length of the primary key, which is calculated by the number of primary key columns and their data types, exceeds the maximum length.

Effect: The operation fails.

Recovery: Make sure the key length is less than 255 bytes and resubmit.

3.68. SQL 1086

Lock <lock-name> does not exist.

Where <lock-name> is the name of the specified lock.

Cause: Lock <lock-name> was specified, but does not exist.

Effect: The operation fails.

Recovery: Create a lock <lock-name> or specify a valid lock name and resubmit.

3.69. SQL 1087

DDL lock cannot be granted, invalid operation has been specified.

Cause: An invalid utility operation requested a DDL lock.

Effect: The lock request fails.

Recovery: Specify a valid utility operation, or check to see if invalid utilities are being run, and resubmit.

3.70. SQL 1088

The system generated column SYSKEY must be specified last or not specified at all in the STORE BY column list.

Cause: If the system-generated column SKSKEY is specified in the STORE BY list of columns, it must be specified last.

Effect: The operation fails.

Recovery: Correct the STORE BY clause and resubmit.

3.71. SQL 1089

The system generated column SYSKEY must be specified last or not specified at all in the index column list.

Cause: The system-generated SYSKEY column was not the last column in a CREATE INDEX statement.

Effect: The operation fails.

Recovery: Change the column list to place SYSKEY at the end of the list and resubmit the statement.

3.72. SQL 1090

Self-referencing constraints are currently not supported.

Cause: You attempted to create a self-referencing constraint. A referential constraint is self-referencing if the foreign key is referencing the primary key of the same table.

Effect: The operation fails.

Recovery: Remove the self-reference and resubmit.

3.73. SQL 1094

Object <object-name> could not be dropped because it is not of type <object-type>.

Where <object-name> is the ANSI name of the object stated in the DROP command.

Where <object-type> is the type of object that was stated in the DROP command.

Cause: A DROP TABLE specified an object that is not a base table, or a DROP VIEW specified an object that is not a view, or a DROP PROCEDURE specified an object that is not a procedure.

Effect: The operation fails.

Recovery: Reissue the DROP statement with the correct combination of specified object type and actual object type.

3.74. SQL 1095

The PARTITION BY column <column-name> should also be part of the clustering/storage key.

Where <column-name> is the name of a column of the specified table.

Cause: This error is reported if a column specified in the partitioning key of the PARTITION BY (<partitioning-columns ▸ ) clause of a CREATE TABLE or CREATE INDEX statement is not also a member of the clustering key.

Effect: The table or index is not created.

Recovery: Either remove the offending column from the partitioning key specification (and possibly replace it with a column that is a member of the clustering key) or add the offending column to the clustering key by using the STORE BY clause or by adding it to the primary key.

3.75. SQL 1098

Duplicate partition key (<key>)specified for object <object-name>.

Where <key> is a partition key.

Where <object-name> is the name of the table being created or changed.

Cause: You attempted to create or change a table so that more than one partition has the same first key.

Effect: The operation fails.

Recovery: Change the statement so that it does not define two partitions to have the same first key, and resubmit.

3.76. SQL 1099

Column <column-number> is unnamed. You must specify an AS clause for that column expression, or name all the columns by specifying a view column list.

Where <column-number> is the specified column.

Cause: You attempted to create a view by using a query expression in which <column-number> was unnamed.

Effect: The operation fails.

Recovery: Correct the statement to supply an AS clause for each unnamed column and resubmit.

3.77. SQL 1104

Default value string is too long for column <column-name>.

Where <column-name> is the name of a character-type column for which a default value is specified.

Cause: The specified default value for <column-name> is longer than the maximum of 239 characters.

Effect: The operation fails.

Recovery: Correct the error and resubmit.

3.78. SQL 1105

CREATE TABLE LIKE statement cannot contain both HORIZONTAL PARTITIONS and STORE BY clauses.

Cause: A CREATE TABLE . . . LIKE statement specifies both the WITH PARTITIONS and STORE BY clause, which is not allowed.

Effect: The operation fails.

Recovery: Correct the error and resubmit.

3.79. SQL 1106

The specified partition <partition-location> of object <table-name> does not exist.

Where <partition-location> is the location of the specified partition.

Where <table-name> is the name of the table.

Cause: The location name <partition-location> specified in the partition operation does not exist.

Effect: The partition operation fails.

Recovery: Specify a valid partition location name and resubmit.

3.80. SQL 1108

The number of columns specified in the view column list, <view-col-num>, does not match the degree of the query expression, <query-col-num>.

Where <view-col-num> is the number of columns in the view column list.

Where <query-col-num> is the number of columns resulting from the query expression used to define the view.

Cause: The number of columns in the query do not equal the number of columns specified for the view.

Effect: The operation fails.

Recovery: Specify a query statement that has a degree that matches the number of columns in the view column list, and resubmit.

3.81. SQL 1109

The WITH CHECK OPTION clause appears in the definition of view <view-name>, but the view is not updatable.

Where <view-name> is the name of the view being created.

Cause: You used WITH CHECK OPTION in the definition of a view that is not updatable.

Effect: The operation fails.

Recovery: Either make the view updatable or omit the WITH CHECK OPTION and resubmit.

3.82. SQL 1112

An index column list cannot consist only of the system-generated column SYSKEY.

Cause: The column list specified in a CREATE INDEX statement consisted only of the system-generated column SYSKEY.

Effect: The operation fails.

Recovery: Change the column list to include additional columns and reissue the statement.

3.83. SQL 1114

Metadata tables for catalog <catalog-name> could not be created on <location-info>.

Where <catalog-name> is the name of a Trafodion database catalog.

Where <location-info> is the location where the tables could not be created.

Cause: This error can result from various CREATE statements issued to create the metadata. See the accompanying error messages to determine the cause.

Effect: One or more objects are not created.

Recovery: See the accompanying error messages for recovery action.

3.84. SQL 1115

Label <file-name> could not be created for <ANSI-name> (file error <error>).

Where <file-name> is the name of the file for the label creation that failed.

Where <ANSI-name> is the name of the table.

Where <error> is the error number returned.

Cause: A file system error occurred on the attempt to create the label.

Effect: The table is not created.

Recovery: Correct the file system error and reissue the CREATE statement. For information about file system errors, see File-System Errors.

3.85. SQL 1116

The current partitioning scheme requires a user-specified clustering key on object <table-name>.

Where <table-name> is the name of the table.

Cause: The partitioning scheme requires a user-specified clustering key.

Effect: The operation fails.

Recovery: Specify a clustering key, either through a PRIMARY KEY, STORE BY, or PARTITION BY clause.

3.86. SQL 1117

Dropping the only partition of an object is not allowed. At least two partitions must exist to perform the drop.

Cause: You attempted to drop the only partition of the object.

Effect: The operation fails.

Recovery: None.

3.87. SQL 1118

Creating object <table-name> is not allowed in metadata schema.

Where <table-name> is the name of the object.

Cause: You attempted to create an object in the metadata schema.

Effect: The operation fails.

Recovery: Specify a different schema and resubmit.

3.88. SQL 1119

Dropping metadata object <table-name> is not allowed.

Where <table-name> is the name of a Trafodion database metadata table.

Cause: You attempted to use the DROP TABLE statement to drop a table that is part of the Trafodion database metadata.

Effect: The table is not dropped.

Recovery: Metadata tables can be dropped only by using the DROP SQL statement or the MXTOOL GOAWAY utility. Both methods will irrevocably destroy the database.

3.89. SQL 1120

Use of float datatype in a partitioning key is not allowed.

Cause: You attempted an operation on a partitionable table that has float datatype in the partitioning key.

Effect: The operation fails.

Recovery: Enable the default ALLOW_FLOAT_DATATYPES_IN_PARTITIONING_KEY via a control query default statement and retry the operation.

3.90. SQL 1121

Partitions cannot be added or dropped on table <table-name>. These partition operations are not allowed on tables whose clustering key consists only of the SYSKEY.

Where <table-name> is the name of the table.

Cause: You attempted to do an invalid ADD, DROP, or MODIFY of a partition.

Effect: The operation fails.

Recovery: None.

3.91. SQL 1122

The number of specified partition key values (<partitionkey-value-list>) for object <object-name> exceeds the number of user defined key columns, <key-col-number>.

Where <partition-key-value-list> is a list of the partition key values.

Where <object-name> is the name of the object.

Where <key-col-number> is the number of columns in the user-defined key.

Cause: The number of specified partition key values (<partition-key-valuelist>) for object <object-name> exceeds the number of user-defined key columns, <key-col-number>.

Effect: The operation fails.

Recovery: Fix the statement and resubmit.

3.92. SQL 1123

Not all of the partition key values (<key>) for object <object-name> could be processed. Please verify that the correct key value data types were specified.

Where <key> is a list of the partition key values.

Where <object-name> is the name of the object.

Cause: You attempted to access a table using a first key value that contains an element that is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

3.93. SQL 1124

Use of a float datatype in a partitioning key has been enabled by the default ALLOW_FLOAT_DATATYPES_IN_PARTIONING_KEY. This could give some incorrect results and the users should be aware of it.

Cause: You attempted an operation on a partitionable table that has float datatype in the partitioning key.

Effect: The operation completes without errors, but the results might not be correct. The float data value might not be evaluated consistently to the same value each time.

Recovery: Do not use float data types in the partitioning key of a partitionable table.

3.94. SQL 1127

The specified table <table-name> is not a base table. Please verify that the correct table was specified.

Where <table-name> is the name of the table.

Cause: You attempted to perform an operation that can be performed only on a base table, and the specified object is not a base table.

Effect: The operation fails.

Recovery: Specify a valid base table and resubmit.

3.95. SQL 1130

The column requires a default value.

Cause: You attempted to create a column that requires a default value, without specifying a default value.

Effect: The operation fails.

Recovery: Specify a valid default value for the column and resubmit.

3.96. SQL 1132

An added column cannot have both DEFAULT NULL and NOT NULL.

Cause: You attempted to add a column that is both DEFAULT NULL and NOT NULL.

Effect: The operation fails.

Recovery: Determine whether the column should be DEFAULT NULL or NOT NULL and resubmit.

3.97. SQL 1133

Only super ID can perform this operation.

Cause: You attempted to perform an operation that can be performed only by the super ID.

Effect: The operation fails.

Recovery: Log on as the super ID and then resubmit.

3.98. SQL 1134

A concurrent utility or DDL is being performed on object <object-name>, its parent, or one of its dependencies. That operation must complete before the requested operation can run.

Where <object-name> is the name of the object.

Cause: You attempted to execute a utility or alter the DDL of an object while a concurrent utility or DDL operation was being performed on the object, its parent, or its dependencies.

Effect: The operation fails.

Recovery: Wait until the concurrent operation has finished and then resubmit.

3.99. SQL 1135

Clustering key column <column-name> must be assigned a NOT NULL NOT DROPPABLE constraint.

Where <column-name> is the name of the column in the clustering key.

Cause: You attempted to make a column that is not NOT NULL NOT DROPPABLE a part of the clustering key of a table.

Effect: The operation fails.

Recovery: Specify that the <column-name> is NOT NULL NOT DROPPABLE and resubmit.

3.100. SQL 1136

For an added column, the PRIMARY KEY clause cannot specify NOT DROPPABLE.

Cause: You used the ALTER TABLE statement to add a column specifying a primary key that is not droppable. A primary key added through ALTER TABLE must be droppable.

Effect: The operation fails.

Recovery: Change the ALTER TABLE statement to specify DROPPABLE for the primary key.

3.101. SQL 1139

System-generated column <column-name> of base table <table-name> cannot appear in the search condition of a check constraint definition.

Where <column-name> is the name of a column of <table-name>.

Where <table-name> is the name of the affected table.

Cause: You attempted to create a check constraint that references a system-generated column. The column named SYSKEY is often system-generated.

Effect: The operation fails.

Recovery: Modify the statement so that no check constraints reference any system-generated column and resubmit.

3.102. SQL 1140

Row-length <actual-row-length> exceeds the maximum allowed row-length of <maximum-row-length> for table <table-name>.

Where <actual-row-length> is the length of a row of the table.

Where <maximum-row-length> is the largest row size allowed.

Where <table-name> is the name of the table.

Cause: On a CREATE or ALTER TABLE statement, the size of the row exceeds the maximum allowed row size.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for row size limit calculations. Change the column definitions and reissue the statement.

3.103. SQL 1141

Label <file-name> for object could not be accessed. File system error <error-number>.

Where <file-name> is the Trafodion platform file name of a partition of object.

Where <error-number> is a Trafodion platform file system error.

Cause: An ALTER TABLE or ALTER INDEX operation encountered a file system error.

Effect: The operation fails.

Recovery: For information about file system errors, see File-System Errors.

3.104. SQL 1142

Because it is not audited, this table cannot have a column added that is declared NOT NULL, or has a CHECK, UNIQUE, PRIMARY KEY, or FOREIGN KEY constraint.

Cause: Internal error.

Effect: The Trafodion database is unable to perform the requested operation.

Recovery: None. Contact the Trafodion User Distribution List

3.105. SQL 1143

Validation for constraint <constraint-name> failed; incompatible data exists in referencing base table <referencing-table-name> and referenced base table <referenced-table-name>. To display the data violating the constraint, please use the following DML statement: <statement-text>.

Where <constraint-name> is the name of a column constraint or table constraint.

Where <referencing-table-name> is the table on which the constraint is being added.

Where <referenced-table-name> is the table specified in the FOREIGN KEY clause.

Where <statement-text> is a query.

Cause: You attempted to add a referential integrity constraint that is violated by rows already in the table.

Effect: The operation fails.

Recovery: Run the query <statement-text> to see the rows that violate the referential constraint. Either change those rows or change the referential constraint definition and resubmit.

3.106. SQL 1144

A quoted string was expected in first key clause for column <column-name> on table <table-name>, but the value detected is (<first-key-string>).

Where <column-name> is the column in <table-name>.

Where <table-name> is the name of the table.

Where <first-key-string> is the erroneous value used in the FIRST KEY clause for <column-name>.

Cause: In a CREATE TABLE statement, a value specified as first key is not a quoted string, but the type of the column for which this value is specified is one of the character data types.

Effect: The operation fails.

Recovery: Correct the value <first-key-string> to be a type that is compatible with the type of column <column-name> and resubmit.

3.107. SQL 1145

The catalog name <catalog-name> is reserved for {project-name} metadata.

Where <catalog-name> is the name of a Trafodion database catalog.

Cause: Trafodion reserves certain catalog names for its own use.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for reserved names. Change <catalog-name> to a name that is not reserved and resubmit.

3.108. SQL 1146

Object <object-name> could not be altered because it is not a <object-type>.

Where <object-name> is the name of the object being requested.

Where <object-type> is the type of object required for the DDL statement issued.

Cause: The type of the object specified in the command is inconsistent with the DDL command being used. For example, this occurs if DROP TABLE is used, and the object you specify is an INDEX.

Effect: The operation fails.

Recovery: Check that the correct object name was specified and execute a statement that is consistent with that type of object.

3.109. SQL 1147

System-generated column <column-name> of base table <table-name> cannot appear in a unique or primary key constraint.

Where <column-name> is the SYSKEY column.

Where <table-name> is the name of the table.

Cause: You tried to create a unique or primary key constraint on the SYSKEY column.

Effect: The operation fails.

Recovery: Do not use the SYSKEY as part of the unique or primary key.

3.110. SQL 1148

System-generated column <column-name> of base table <table-name> cannot appear in a referential integrity constraint definition.

Where <column-name> is the SYSKEY column.

Where <table-name> is the name of the table.

Cause: You tried to create a referential constraint on a table column that is the SYSKEY, which is not supported.

Effect: The operation fails.

Recovery: Do not use the SYSKEY as part of the referenced key.

3.111. SQL 1150

Table <table-name> was not created as Partition Overlay Support could not generate volume names for the partitions to reside on.

Where <table-name> is the name of the table.

Cause: When the Partition Overlay Support feature is enabled without setting volume names (through CQD POS_LOCATIONS) for table partitions to reside on, location names are generated automatically. However, the Trafodion database software could not generate the location names automatically and, because the CQD POS_RAISE_ERROR is set, the table is not created.

Effect: The operation fails.

Recovery: To correct the error, choose a recovery method:

  • Verify that the disk volumes are available on the current node and retry the request.

  • Specify the volume names where the partitions need to be created for the given CREATE TABLE statement through CONTROL QUERY DEFAULT POS_LOCATIONS, and then retry the request.

  • Do not set the CQD POS_RAISE_ERROR, in which case, a simple table without partitions is created when the volume names cannot be generated.

3.112. SQL 1151

POS (Partition Overlay Support) was not applied as volume names could not be generated for the partitions. So a simple table <table-name> was created without partitions.

Where <table-name> is the name of the table.

Cause: When the Partition Overlay Support feature is enabled without setting volume names (through CQD POS_LOCATIONS) for table partitions to reside on, location names are generated automatically. However, the Trafodion database software could not generate the location names automatically, and because the CQD POS_RAISE_ERROR is not set, the given table is created as a simple table without partitions as it would be if the Partition Overlay Support feature was not enabled.

Effect: The POS feature was not applied. A simple table without partitions was created.

Recovery: None if a non-partitioned table is requested. To request a partitioned table, delete the table, verify that disk volumes are available, and resubmit. You can also specify the volume names where the partitions need to be created for the given CREATE TABLE through CONTROL QUERY DEFAULT POS_LOCATIONS, and then retry the request.

3.113. SQL 1154

Cannot create object <object-name> as the table size is too big to fit on the system.

Cause: Trafodion could not create the object because the requested table size is bigger than the total amount of disk space available on the system.

Effect: The SQL operation fails.

Recovery: Check that the table size requested is big enough to fit on the system and retry the statement.

3.114. SQL 1155

Operation cannot be performed because <object-name> is not a synonym.

Cause: You specified an alter or drop of synonym on an object <object-name>, which is not a synonym.

Effect: The operation fails.

Recovery: Correct the syntax so that the correct <object-name> is used.

3.115. SQL 1156

Synonym <name> does not exist or object type is invalid for the current operation.

Cause: You specified a create or alter of synonym <name> on an object that is not a table or view.

Effect: The operation fails.

Recovery: Correct the syntax so that the correct <name> is used.

3.116. SQL 1157

Synonym object <name> is the same as previous mapping.

Cause: You specified an alter of synonym on an object <name>, which is the same as its previous mapping.

Effect: The operation succeeds with a warning.

Recovery: None.

3.117. SQL 1158

Synonym <name> already exists.

Cause: You specified a create of synonym <name> on an object, but a synonym of that name already exists.

Effect: The operation fails.

Recovery: Correct the syntax so that the correct <name> is used.

3.118. SQL 1159

The specified object <name> is not a table or a view. Please verify that the correct object was specified.

Cause: You specified an alter or drop of synonym <name>, but a synonym of that name already exists.

Effect: The operation fails.

Recovery: Correct the syntax so that the correct <name> is used.

3.119. SQL 1160

A mismatch between the NOT DROPPABLE PRIMARY KEY constraint and the STORE BY clause was detected. When both clauses are specified, the STORE BY key column list must be the same as, or a prefix of , the PRIMARY KEY column list. This mismatch is caused by differences between the columns themselves, the order of columns, or the ASC/DESC attribute.

Cause: You attempted to create a table that contains both a NOT DROPPABLE PRIMARY KEY constraint and a STORE BY clause. The syntax specified is not correct. The STORE BY column list must be the same as, or a prefix of, the NOT DROPPABLE PRIMARY KEY column list.

Effect: The operation fails.

Recovery: If you want the STORE BY column list that specifies the clustering key to be different than the PRIMARY KEY, specify a DROPPABLE PRIMARY KEY. If you want the PRIMARY KEY to be the same as the STORE BY key, do not specify a STORE BY clause. Correct the syntax and resubmit.

3.120. SQL 1161

System generated column SYSKEY cannot be specified as part of the PARTITION BY clause.

Cause: Trafodion could not create the object because system-generated column SYSKEY is not allowed as part of the PARTITION BY clause.

Effect: The DDL operation fails.

Recovery: Remove the system added column SYSKEY from the PARTITION BY clause and retry the DDL statement.

3.121. SQL 1180

The required subvolume name for locations in schema <schema-name> is <directory-name>.

Where <schema-name> is the schema in which the object is being created.

Where <directory-name> is the designated subvolume name for that schema.

Cause: One or more LOCATION clauses in the CREATE or MODIFY statement contained a Trafodion platform location whose subvolume did not match the designated subvolume for the schema in which the object was being created.

Effect: The object was not created.

Recovery: Either correct the invalid LOCATION clauses or remove them and allow the system to generate the Trafodion platform locations.

3.122. SQL 1181

Label <file-name> could not be dropped. (file error <error>).

Where <file-name> is the name of the table, index, view, or routine being dropped.

Where <error> is the returned file system error number.

Cause: The object you attempted to drop resulted in file system error <error>.

Effect: The DDL DROP operation fails.

Recovery: See previous messages in this Trafodion database software operation to determine the necessary corrective actions. Also, use the file system error <error-number> to analyze the cause. For information about file system errors, see File-System Errors. Fix the error and resubmit.

3.123. SQL 1182

Error <error> was returned by the file system on resource fork <file-name>.

Where <error> is the error returned.

Where <file-name> is the name of the file.

Cause: File system error.

Effect: The operation fails.

Recovery: For information about file system errors, see File-System Errors.

3.124. SQL 1183

Error <error> was returned by the file system on metadata table <ANSI-name> (file name <file-name>).

Where <error> is the error returned.

Where <ANSI-name> is the metadata table.

Where <file-name> is the name of the file.

Cause: File system error.

Effect: The operation fails.

Recovery: For information about file system errors, see File-System Errors.

3.125. SQL 1184

You do not have the required privilege(s) on <column-name>.

Where <column-name> is the name of a column specified in the references part of a referential integrity constraint.

Cause: You attempted to establish a referential integrity constraint on a column for which the executing user ID has no REFERENCES privileges.

Effect: The operation fails.

Recovery: Establish correct column privileges and resubmit.

3.126. SQL 1185

The location name is either invalid or missing.

Cause: A partition location is either invalid or missing.

Effect: The operation fails.

Recovery: Specify the correct location for all partitions involved in the affected command.

3.127. SQL 1186

Column <column-name> is of type <column-data-type> which is not compatible with the default value's type, <value-datatype>.

Where <column-name> is the name of the column that has an error.

Where <column-data-type> is the data type of <column-name>

Where <value-data-type> is the value specified as the default value for the column.

Cause: The value specified as the default for the column is incompatible with the type of the column.

Effect: The operation fails.

Recovery: Change either the column data type or the value for the default to be compatible types and resubmit.

3.128. SQL 1187

The schema name <schema-name> is reserved for {project-name} metadata.

Where <schema-name> is the name of a Trafodion database schema.

Cause: Trafodion reserves certain schema names for its own use.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for reserved schema names. Choose a name that is not reserved and reissue the CREATE statement.

3.129. SQL 1188

Referential integrity constraint <constraint-name> for table <table-name> could not be created due to circular dependency: <dependency-information>.

Where <constraint-name> is the name of a column constraint or table constraint. Where <table-name> is the name of the table specified in the operation.

Where <dependency-information> is a list of unique constraints that cause the circular dependency.

Cause: You tried to define a referential constraint that is creating a circular dependency, where one of the columns of the table is referencing a column that belongs to the same table, either directly or indirectly.

Effect: The operation fails.

Recovery: None. You cannot define a referential constraint that creates a circular dependency.

3.130. SQL 1224

An invalid data type was specified for routine parameter <parameter-name>.

Where <parameter-name> is the name of the parameter.

Cause: You specified a data type for this routine parameter that is not supported.

Effect: Trafodion is unable to complete the operation.

Recovery: Specify a different data type.

3.131. SQL 1225

Mixing EXECUTE with other privileges is not allowed.

Cause: EXECUTE and another privilege were specified in the same GRANT or REVOKE statement, which is not allowed.

Effect: The operation fails.

Recovery: Use separate GRANT or REVOKE statements for EXECUTE and other privileges.

3.132. SQL 1226

No valid combination of privileges was specified.

Cause: The GRANT or REVOKE statement did not specify a valid combination of privileges.

Effect: The operation fails.

Recovery: Specify a valid combination of privileges in the GRANT or REVOKE statement.

3.133. SQL 1231

User-defined routine <procedure-name> could not be created.

Where <procedure-name> is the stored procedure’s ANSI name.

Cause: The stored procedure could not be created.

Effect: The CREATE PROCEDURE statement fails.

Recovery: Fix the error conditions identified in messages preceding this message and reissue the CREATE PROCEDURE statement.

3.134. SQL 1232

A file error occurred when saving dropped table DDL for table <table-name> to <path-name>.

Where <table-name> is the table being dropped whose DDL was to be saved.

Where <path-name> is the pathname of the file to which the DDL was to be saved.

Cause: A file system error occurred when you attempted to save a table DDL. Possible reasons are:

  • The directory /usr/tandem/sqlmx/ddl did not exist or could not be created.

  • The system did not have write access to /usr/tandem/sqlmx/ddl.

  • Insufficient file space was available.

Effect: The table is not dropped.

Recovery: Either correct the file system problem and drop the table or perform a SHOWDDL on the existing table, capture the output, set. SAVE_DROPPED_TABLE_DDL to "OFF," and drop the table. For information about file system errors, see File-System Errors.

3.135. SQL 1233

Creating schema in {project-name} system catalog <catalog-name> is prohibited.

Where <catalog-name> is the name of the Trafodion database catalog.

Cause: You attempted to create a schema in the system catalog.

Effect: The operation fails.

Recovery: Choose a different catalog name and reissue the CREATE statement.

3.136. SQL 1235

An invalid combination of EXTENT sizes and MAXEXTENTS was specified

for table or index <table-name>.

Cause: A CREATE or ALTER statement specified an invalid combination of EXTENT sizes and MAXEXTENTS.

Effect: The operation fails.

Recovery: Correct the error and retry the operation.

3.137. SQL 1236

The schema name specified for SQL object <object-name> is not valid. The schema name must be the same as the schema being created.

Where <object-name> is the name of the SQL object.

Cause: You specified a schema name for an object that is different from the name of the schema being created.

Effect: The operation fails.

Recovery: Specify a schema name for the object that matches the name of the schema being created.

3.138. SQL 1238

The character set for TRIGGER text must be ISO88591.

Cause: You specified a literal with a character set other than ISO88591 in the text of a create trigger statement.

Effect: The operation fails.

Recovery: Specify only ISO88591 literals in the command.

3.139. SQL 1239

The character set for string literals in VIEW text must be ISO88591.

Cause: You specified a literal with a character set other than ISO88591 in the text of a create view statement.

Effect: The operation fails.

Recovery: Specify only ISO88591 literals in the command.

3.140. SQL 1240

The character set for a PARTITION KEY column must be ISO88591.

Cause: You specified a literal with a character set other than ISO88591 as a partition key.

Effect: The operation fails.

Recovery: Specify only ISO88591 literals as partition keys.

3.141. SQL 1241

The character set for HEADING must be ISO88591.

Cause: You specified a literal with a character set other than ISO88591 in a HEADING clause.

Effect: The operation fails.

Recovery: Specify only ISO88591 literals in HEADING clauses.

3.142. SQL 1242

The character set for string literals in CONSTRAINT must be ISO88591.

Cause: You specified a literal with a character set other than

ISO88591 in the text of a constraint.

Effect: The operation fails.

Recovery: Specify only ISO88591 literals in constraints.

3.143. SQL 1243

The hexadecimal form of string literals is not allowed in this context.

Cause: You specified a hexadecimal literal in the text of the statement, which is not allowed.

Effect: The operation fails.

Recovery: Do not specify hexadecimals in this type of command.

3.144. SQL 1245

The supplied partition key value (<key-value>) for column <column-name> of object <object-name> is not valid.

Where <key-value> is the specified first key value.

Where <column-name> is the column of <object-name> that corresponds to the invalid key value.

Where <object-name> is the name of the affected object.

Cause: A utility command specified an invalid key value.

Effect: The operation fails.

Recovery: Specify valid key values and resubmit.

3.145. SQL 1246

The supplied partition key value (<key-value>) is inconsistent

with the data type of column <column-name> of object <object-name>.

Where <key-value> is the specified first key value.

Where <column-name> is the column of <object-name> that corresponds to the invalid key value.

Where <object-name> is the name of the affected object.

Cause: A utility command specified a key value that is inconsistent with the data type of the column that corresponds to the key value.

Effect: The operation fails.

Recovery: Specify valid key values and resubmit.

3.146. SQL 1248

Partition name <partition-name> has already been used. Each partition in an object should have a unique name.

Where <partition-name> is the name specified for a partition.

Cause: Partition names are required to be unique within the set of partitions of an object.

Effect: The CREATE statement fails.

Recovery: Choose a name that is not the same as any other partition name in this object and reissue the CREATE statement.

3.147. SQL 1250

DROP cannot be performed on object <object-name> because a utility operation (<operation-type>) associated with DDL_LOCK <lock-name> is currently running.

Where <object-name> is the ANSI name of the object named in the DROP command.

Where <operation-type> is the type of utility operation.

Where <lock-name> is the ANSI name of the DDL lock object that is associated with the utility operation.

Cause: You attempted to drop an object that a utility command is using.

Effect: The operation fails.

Recovery: Wait until the utility operation has finished, and then retry the DROP operation.

3.148. SQL 1251

The extra insignificant digits of default value <value> are truncated to match the scale of the data type of column <column-name>.

Where <value> is the default value that was specified for <column-name>.

Where <column-name> is the name of the column in the table.

Cause: A CREATE TABLE or ALTER TABLE. . .ADD COLUMN specified a default value with a scale greater than the scale of the column.

Effect: The scale of the default value is set to that of the column; extra digits to the right are discarded.

Recovery: None. This is a warning message only.

3.149. SQL 1252

The existing index <index-name> to be used by a unique or primary constraint has not been populated. Please populate the index and then try to add the constraint again.

Where <index-name> is the name of an existing unpopulated index.

Cause: An existing index that is not populated has been chosen for a unique or primary constraint, which is not allowed.

Effect: The operation fails.

Recovery: Populate the index and resubmit.

3.150. SQL 1254

Duplicate unique constraints are not allowed with same set of columns.

Cause: You attempted to specify both the unique and primary key constraints or multiple unique constraints on the same set of columns, which is not allowed.

Effect: The operation fails.

Recovery: Change your query so that both unique and primary constraints or multiple unique constraints are not specified on the same set of columns.

3.151. SQL 1262

The command cannot be executed because <operation> is in progress for <schema>.

Where <operation> is a schema-level operation.

Where <schema> is the ANSI name of the affected schema.

Cause: You attempted a DDL or utility operation on a database object while <operation> was in progress for that object’s <schema>.

Effect: The DDL or utility operation fails.

Recovery: Wait until the operation has finished, and then retry the DDL or utility operation.

3.152. SQL 1263

Table, view, and stored procedure names that start with <text> are reserved for {project-name} metadata.

Where <text> is the disallowed name that was specified.

Cause: You specified a Trafodion database reserved object name.

Effect: The object is not created.

Recovery: See the Trafodion SQL Reference Manual for the list of reserved object names. Choose a name that is not reserved and reissue the CREATE statement.

3.153. SQL 1264

Duplicate privileges are not allowed in a GRANT or REVOKE statement.

Cause: You specified duplicate privileges in a GRANT or REVOKE statement.

Effect: The operation fails.

Recovery: Reissue the GRANT or REVOKE statement, specifying a single privilege or a list of distinct privileges.

3.154. SQL 1265

Duplicate grantees not allowed in a GRANT or REVOKE statement.

Cause: You specified duplicate grantees in a GRANT or REVOKE statement.

Effect: The operation fails.

Recovery: Reissue the GRANT or REVOKE statement specifying a single grantee or a list of distinct grantees.

3.155. SQL 1266

Only EXECUTE privilege is supported for a procedure or routine.

Cause: You specified an unsupported privilege on a procedure or routine in a GRANT statement.

Effect: The operation fails.

Recovery: Reissue the GRANT statement specifying the valid privilege for the procedure or routine.

3.156. SQL 1267

EXECUTE privilege is incompatible with this object type.

Cause: You specified a privilege that is not supported for the object type in a GRANT statement.

Effect: The operation fails.

Recovery: Reissue the GRANT statement specifying the valid privilege for the object type.

3.157. SQL 1268

Duplicate columns are not allowed in a GRANT or REVOKE statement.

Cause: You specified duplicate column names with the update or references privilege in a GRANT or REVOKE statement.

Effect: The operation fails.

Recovery: Correct the GRANT or REVOKE statement by specifying a single column name or a list of distinct column names.

3.158. SQL 1270

ALLOCATE or DEALLOCATE failed for object <sql-object-name> due to
file error <file-system-error-number> on <file-name>.

Where <sql-object-name> is the ANSI name of the affected SQL database object.

Where <file-system-error-number> is a Trafodion platform file system error code.

Cause: A CREATE or ALTER operation encountered a file system error <error-number> during processing of the ALLOCATE or DEALLOCATE attribute.

Effect: The operation fails.

Recovery: For information about file system errors, see <file-system-errors,File-System Errors>.

3.159. SQL 1271

ALLOCATE failed for object <object-name> because extents to be allocated <number> is greater than the MAXEXTENTS for a partition of the object.

Where <object-name> is the ANSI name of the affected database object.

Where <number> is the specified number of extents.

Cause: A CREATE or ALTER operation specified an ALLOCATE attribute value that was greater than the MAXEXTENTS value for the affected database object, which is not allowed.

Effect: The operation fails.

Recovery: If possible, alter the MAXEXTENTS attribute value to be greater than the

desired number of extents to be allocated. The current maximum value for MAXEXTENTS is 768.

3.160. SQL 1273

The specified MAXEXTENTS value must be greater than the number of extents allocated.

Cause: The value that you specified to change MAXEXTENTS is less than or equal to the allocated extents.

Effect: The operation fails.

Recovery: Use a MAXEXTENTS value greater than the allocated extents.

3.161. SQL 1274

The specified or default MAXEXTENTS value is not sufficient. The MAXEXTENTS value has been automatically set to the new value of <value> for the file <file-name>.

Cause: You specified an insufficient MAXEXTENTS value while creating an index.

Effect: The SQL operation completed with a warning.

Recovery: This is a warning only.

3.162. SQL 1275

Constraint <constraint-1> cannot be dropped because it is needed by unique constraint <constraint-2>.

Where <constraint-1> is the constraint you are trying to drop.

Where <constraint-2> is the UNIQUE constraint.

Cause: You attempted to drop a constraint that is needed by a UNIQUE constraint, which is not allowed because it would leave a UNIQUE constraint on a column, but without a NOT NULL constraint for that column.

Effect: The operation fails.

Recovery: To drop the constraint, you must remove the UNIQUE constraint or add an additional NOT NULL constraint to the columns that contain UNIQUE constraints and only one NOT NULL constraint for that column.

3.163. SQL 1277

Unrecognized partitioning scheme for object <object-name>.

<object-name> is the name of the SQL object (table or index).

Cause: The Trafodion database does not recognize the partitioning scheme stored in the metadata for the named object.

Effect: The named object is considered corrupt and is inaccessible.

Recovery: None. Contact the Trafodion User Distribution List Consider running the VERIFY operation on the named object to check for inconsistencies in the metadata with respect to the partitioning scheme.

3.164. SQL 1278

The command cannot be executed because <operation> is in progress for all schemas in catalog <catalog>.

<operation> is a schema level operation, currently UPGRADE or DOWNGRADE, that uses the ALL SCHEMAS IN CATALOG flavor. <catalog> is a catalog name that is affected by <operation>.

Cause: An attempt was made to execute a DDL or utility operation that affected <catalog>, or a schema in that catalog.

Effect: The operation fails.

Recovery: Wait until <operation> is finished, then retry the failed DDL or utility operation.

3.165. SQL 1301

NO ACTION referential action for <referential-triggered-action> clause is not yet supported as specified by ANSI SQL-99 standard. To alter the behavior, set an appropriate value for the REF_CONSTRAINT_NO_ACTION_LIKE_RESTRICT default.

Where <referential-triggered-action> can either be ON DELETE or ON UPDATE.

Cause: NO ACTION referential action is specified in the referential integrity definition, and the CONTROL QUERY DEFAULT value for REF_CONSTRAINT_NO_ACTION_LIKE_RESTRICT is 'OFF.'

Effect: The NO ACTION referential action cannot be defined.

Recovery: To alter the behavior of NO ACTION referential action, set the appropriate value for the REF_CONSTRAINT_NO_ACTION_LIKE_RESTRICT default.

3.166. SQL 1302

NO ACTION referential action for <referential-triggered-action> clause behaves like RESTRICT referential action. To alter the behavior, set the appropriate value for the REF_CONSTRAINT_NO_ACTION_LIKE_RESTRICT default.

Where <referential-triggered-action> can either be ON DELETE or ON UPDATE.

Cause: NO ACTION referential action is specified in the referential definition and the CONTROL QUERY DEFAULT value for REF_CONSTRAINT_NO_ACTION_LIKE_RESTRICT is 'SYSTEM.'

Effect: The NO ACTION referential action has RESTRICT referential action semantics. It is recorded as NO ACTION in the metadata table.

Recovery: To alter the behavior of the NO ACTION referential action, set the appropriate value for the REF_CONSTRAINT_NO_ACTION_LIKE_RESTRICT default.

3.167. SQL 1305

The specified schema location <directory> is already in use by schema <schema>.

Where <directory> is the Trafodion platform subvolume name specified in the LOCATION clause of the CREATE SCHEMA command.

Where <schema> is the ANSI name of an existing schema that already uses <directory> as a schema subvolume.

Cause: In a CREATE SCHEMA command, you specified <directory> in the LOCATION clause; however, this subvolume is already being used as schema subvolume by <schema>.

Effect: The statement fails unless it includes the optional REUSE clause to allow reuse of the same schema subvolume name. If the REUSE clause is used, this is a warning message and the schema is created successfully. The warning can be issued repeatedly for a single CREATE SCHEMA command if multiple schemas already exist with <directory> as the schema subvolume.

Recovery: Only schemas that are RDF replicated to another node should have the same subvolume names as their corresponding schemas on the other node. To create these, use the optional REUSE clause in the CREATE SCHEMA statement. All other schemas should have unique subvolume names. Schemas that are, or will be, related as RDF primary and backup schemas must have identical schema names and subvolumes on the primary and backup nodes.

3.168. SQL 1307

The schema location <directory> is reserved for {project-name} metadata.

Where <directory> is the Trafodion platform subvolume name specified in the LOCATION clause of the CREATE SCHEMA command.

Cause: In a CREATE SCHEMA command, you specified subvolume in the LOCATION clause, however subvolume names with the format ZSD<digit><anything> are reserved for Trafodion database software metadata schemas.

Effect: The operation fails.

Recovery: Specify a subvolume name using the format ZSD<letter><anything> in the LOCATION clause, and resubmit.

3.169. SQL 1309

Object type for <object-name> is not valid for the current operation.

Where <object-name> is the name of the object.

Cause: You specified an object for an SQL operation that does not support its object type.

Effect: The operation fails.

Recovery: Specify an object of valid object type and retry the operation.

3.170. SQL 1310

The CREATE SCHEMA statement does not support the creation of triggers.

Cause: You specified creation of triggers in the CREATE SCHEMA statement.

Effect: The operation fails.

Recovery: Remove the creation of triggers from the CREATE SCHEMA statement and resubmit. Create triggers in separate statements.

4. Trafodion Compiler Messages (2000 through 2999)

This section includes process creation errors, IPC errors, static compilation errors, and miscellaneous errors from the optimizer.

4.1. SQL 2004

Internal error: error from MXCMP; cannot work on this query.

Cause: Trafodion received an internal error from the Trafodion compiler.

Effect: The operation fails.

Recovery: None. Report the entire message to user@trafodion.incubator.apache.org.

4.2. SQL 2009

The user transaction must be rolled back (or committed, if that makes sense in the application) before MXCMP can be restarted and proceed.

Cause: An outstanding transaction must be resolved before the Trafodion compiler can be restarted.

Effect: The operation fails.

Recovery: None.

4.3. SQL 2011

Server process could not be created - error <number> while resolving program file name <name>.

Where error <number> is the error number.

Where <name> is the name of the program file.

Cause: Trafodion was unable to create a server process because of the process control procedure error <number> it received while resolving the program file name.

Effect: The operation fails.

Recovery: Use the process control procedure error to diagnose and correct the problem.

4.4. SQL 2012

Server process <name> could not be created - error <number> <number-1>, TPCError = <number-2>, error detail = <text>.

Where <name> is the name of the server process.

Where <number-1> is the error number.

Where <number-2> is the TPCError.

Where <text> is the error message text.

Cause: Trafodion was unable to create server process <name> because of the process control procedure error <number> it received. More information appears in detail <text>.

Effect: The operation fails.

Recovery: Use the process control procedure error to diagnose and correct the problem.

4.5. SQL 2013

Server process <name> could not be created - error <number> on program file.

Where <name> is the name of the server process.

Where <number> is the error number.

Cause: Trafodion was unable to create server process <name> because of the process control procedure error <number> it received on the program file.

Effect: The operation fails.

Recovery: Use the process control procedure error to diagnose and correct the problem.

4.6. SQL 2014

Server process <name> could not be created - error <number> on swap file.

Where <name> is the server process name.

Where <number> is the error number.

Cause: Trafodion was unable to create server process <name> because of the process control procedure error <number> it received on the swap file.

Effect: Trafodion does not create the server process.

Recovery: Use the process control procedure error to diagnose and correct the problem.

4.7. SQL 2020

Server process <name> could not be created - unlicensed privileged program.

Where <name> is the server process name.

Cause: Trafodion was unable to create server process <name> because it is an unlicensed privileged program. The server process was configured incorrectly at installation.

Effect: The operation fails.

Recovery: The server process must be a licensed privileged program. Check your configuration.

4.8. SQL 2029

The new min value is greater than the current max value <number>.

Where <number> is the current maximal value.

Cause: The new minimal value is greater than the current maximal value.

Effect: The new minimal value is not set.

Recovery: Specify a new minimal value that is less than the current maximal value or specify a new maximal value that is greater than the new minimal value.

4.9. SQL 2030

The new max value is less than the current min value <number>.

Where <number> is the current minimal value.

Cause: The new maximal value is smaller than the current minimal value.

Effect: The new maximal value is not set.

Recovery: Specify a new maximal value that is greater than the current minimal value.

4.10. SQL 2033

<process-id>: Error <number> while communicating with process <name>.

Where <process-id> identifies the process.

Where <number> is the error number.

Where <name> is the name of the server process.

Cause: The Trafodion database <process-id> received process control procedure error <number> while communicating with the server process <name>.

Effect: Trafodion is not able to communicate with the process.

Recovery: Use the process control procedure error to diagnose and correct the problem.

4.11. SQL 2034

<process-id>: Error <number> while communicating with server process <name>.

Where <process-id> identifies the process.

Where <number> is the error number.

Where <name> is the name of the server process.

Cause: The Trafodion database <process-id> received process control procedure error <number> while communicating with server process <name>.

Effect: Trafodion process is not able to communicate with the server process.

Recovery: Use the process control procedure error to diagnose and correct the problem.

4.12. SQL 2035

<process-id>: Open of process <name> failed - error = <number>.

Where <process-id> identifies the process.

Where <name> is the name of the server process.

Where <number> is the error number.

Cause: The Trafodion database <process-id> was unable to open server process <name> because of the operating system error <number> it received.

Effect: The operation fails.

Recovery: Use the operating system error to diagnose and correct the problem.

4.13. SQL 2038

Character set <name> is not supported for SQLCI attribute TERMINAL_CHARSET.

Where <name> is the name of the character set.

Cause: You specified a non-ISO88591 character set name.

Effect: The operation fails.

Recovery: Specify an ISO88591 character set name.

4.14. SQL 2050

<attribute> is not the name of any DEFAULTS table attribute.

Where <attribute> is the attribute name you specified.

Cause: If the SQLSTATE is 42000, this is an error. You attempted to set a CONTROL QUERY DEFAULT setting, but the <attribute> name you specified is not valid. If the SQLSTATE is 01000, this is a warning. In an earlier Trafodion database session, you inserted a row into a DEFAULTS table whose <attribute> column value is invalid.

Effect: If this is an error, the operation fails. If this is a warning, this is an informational message.

Recovery: Correct the attribute name and resubmit.

4.15. SQL 2051

Either <control-option-name> or value '<value>' is not valid.

Cause: You specified an invalid <control-option name> or a valid option with an invalid <value>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.16. SQL 2053

Optimizer pass two assertion failure (<failure-text>) in file <filename> at line <line-num>.

Cause: This is an informational message that is a result of the two-pass mechanism of the optimizer. The optimizer created a simple plan, and then while refining that plan, an internal error occurred, so the simple plan was not improved. The simple plan is still valid and will work.

Effect: Your query will use the original, simple plan.

Recovery: Informational message only; no corrective action is needed. This message will be accompanied by an assertion failure message and, possibly, CONTROL QUERY SHAPE information. However, report the entire message, and the preceding assertion failure message, to user@trafodion.incubator.apache.org.

This additional information will also be helpful: the DDL for the tables involved, the query that produced this warning, and any CONTROL QUERY SHAPE and CONTROL QUERY DEFAULT settings in effect when the error occurred.

4.17. SQL 2054

HIST_NO_STATS_ROWCOUNT should always be greater than or equal to CQD HIST_NO_STATS_UEC. Present value of HIST_NO_STATS_UEC is '<value>'.

Cause: You attempted to set the CQD HIST_NO_STATS_ROWCOUNT value as less than the current value of CQD HIST_NO_STATS_UEC.

Effect: The current value of the HIST_NO_STATS_ROWCOUNT is retained.

Recovery: Set the value of CQD HIST_NO_STATS_ROWCOUNT greater than or equal to the value of HIST_NO_STATS_UEC. If you want to use a smaller value, reduce the value of CQD HIST_NO_STATS_UEC first. Note that any change in either of the two values can have an effect on the plan quality.

4.18. SQL 2055

The specified value '<value>' for DEFAULTS attribute <name> is not valid.

Cause: You specified an invalid value for the DEFAULTS attribute listed in the message.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.19. SQL 2056

The value must be a number in the range <value>.

Cause: You specified a value outside of the allowed range <value>.

Effect: The operation fails.

Recovery: Enter a valid value and resubmit.

4.20. SQL 2057

The value must be a multiple of <value>.

Cause: You specified an invalid value for an attribute. It must be a multiple of <value>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.21. SQL 2058

DEFAULTS attribute <name> is of type <data-type> but is being converted to <data-type>.

Where <name> is the DEFAULTS attribute name.

Where <data-type> is the attribute name value.

Cause: You specified a DEFAULTS attribute name value of <data-type>, which is not supported. The item is being converted to <data-type>, which is supported.

Effect: Because of the conversion, the actual value used might be truncated or rounded.

Recovery: Specify the value using the expected type, if appropriate.

4.22. SQL 2059

Errors or warnings occurred while reading values from DEFAULTS table <name>.

Where <name> is the name of the table.

Cause: You received an error on the DEFAULTS table <name>. A previous error message has appeared with specific information.

Effect: The operation fails.

Recovery: None.

4.23. SQL 2060

Procedure <name> has already been defined in this module. The previous definition is being retained and this latest one ignored.

Where <name> is the procedure name.

Cause: You defined procedure <name> twice in this module.

Effect: Trafodion uses the first definition.

Recovery: This is an informational message only; no corrective action is needed.

4.24. SQL 2061

Static cursor <name> has already been defined in this module. The previous definition, as a static cursor, is being retained and this latest one ignored.

Where <name> is the cursor name.

Cause: You defined the static cursor <name> twice in this module.

Effect: Trafodion uses the first static cursor definition.

Recovery: This is an informational message only; no corrective action is needed.

4.25. SQL 2062

Static cursor <name> has already been defined in this module. The previous definition, as a dynamic cursor, is being retained and this latest one ignored.

Where <name> is the cursor name.

Cause: You defined the static cursor <name> twice in this module.

Effect: Trafodion uses the first dynamic cursor definition.

Recovery: This is an informational message only; no corrective action is needed.

4.26. SQL 2063

Dynamic cursor <name> has already been defined in this module. The previous definition, as a static cursor, is being retained and this latest one ignored.

Where <name> is the cursor name.

Cause: You defined the dynamic cursor <name> twice in this module.

Effect: Trafodion uses the first static cursor definition.

Recovery: This is an informational message only; no corrective action is needed.

4.27. SQL 2064

Dynamic cursor <name> has already been defined in this module. The previous definition, as a dynamic cursor, is being retained and this latest one ignored.

Where <name> is the cursor name.

Cause: You defined the dynamic cursor <name> twice in this module.

Effect: Trafodion uses the first dynamic cursor definition.

Recovery: This is an informational message only; no corrective action is needed.

4.28. SQL 2065

Statement <name> was not found in module <name>.

Where <name> is the statement name.

Where <name> is the module name.

Cause: Trafodion could not find statement <name> in module <name>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.29. SQL 2066

Cursor <name> was not found in module <name>.

Where <name> is the cursor name.

Where <name> is the module name.

Cause: Trafodion could not find cursor <name> in module <name>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.30. SQL 2067

Descriptor <name> has already been defined in this module. The previous definition is being retained and this latest one ignored.

Where <name> is the descriptor name.

Cause: You defined the descriptor <name> twice in this module.

Effect: Trafodion uses the first definition.

Recovery: Informational message only; no corrective action is needed.

4.31. SQL 2068

A procedure body must be a SELECT, INSERT, UPDATE, DELETE, DECLARE CATALOG, DECLARE SCHEMA, or a static DECLARE CURSOR.

Cause: You specified a procedure whose body is invalid. It must be a SELECT, INSERT, UPDATE, DELETE, DECLARE CATALOG, DECLARE SCHEMA, or static DECLARE CURSOR.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.32. SQL 2069

A static cursor declaration may appear only in the body of a procedure.

Cause: You specified a static cursor declaration that is outside the body of a procedure. It should appear only in the body of a procedure.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.33. SQL 2070

Statement is not valid in this context.

Cause: In a module definition file, you specified a query statement such as SELECT, INSERT, UPDATE, DELETE, or a DDL statement. These statements must be embedded in procedures.

Effect: Trafodion is unable to compile the module.

Recovery: Correct the syntax and resubmit.

4.34. SQL 2071

The name <name> has already been declared or defined in this module. The previous definition, as a <definition-type>, is being retained and this latest one ignored.

Where <name> is the name of the module.

Where <definition-type> is the previous definition

Cause: You defined <name> twice in this module in which it was defined as a type definition type.

Effect: Trafodion uses the previous definition.

Recovery: Specify a new name for the item and resubmit, if necessary.

4.35. SQL 2072

A simple value specification that is a literal is not yet supported.

Cause: You specified a simple value as a literal, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.36. SQL 2073

Only super ID user can compile system module <name>.

Where <name> is the name of the module.

Cause: You attempted to compile a system module that can be compiled only by the super ID.

Effect: The operation fails and is unable to compile the entire module correctly.

Recovery: None. Use a different name for your module and recompile.

4.37. SQL 2074

The name <name> is reserved for future system modules.

Where <name> is the name of the module.

Cause: You attempted to use a name that is reserved for future system modules.

Effect: The operation fails and is unable to compile the entire module correctly.

Recovery: None. Use a different name for your module and recompile.

4.38. SQL 2075

The -a <application-name> option is not allowed for system module

compilation

Cause: You specified mxcmp -a <application-name> system-moduledefinition-file, which is not supported.

Effect: The operation fails.

Recovery: Delete the -a <application-name> and retry the mxcmp systemmodule-definition-file command.

4.39. SQL 2076

HIST_NO_STATS_UEC should always be less than or equal to CQD HIST_NO_STATS_ROWCOUNT. Present value of HIST_NO_STATS_ROWCOUNT is 'value'.

Cause: You attempted to set the CQD HIST_NO_STATS_UEC value as greater than the current value of CQD HIST_NO_STATS_ROWCOUNT.

Effect: The current value of the HIST_NO_STATS_UEC is retained.

Recovery: Set the value of CQD HIST_NO_STATS_UEC less than or equal to the value of HIST_NO_STATS_ROWCOUNT. If you want to use a larger value, increase the value of CQD HIST_NO_STATS_ROWCOUNT first. Note that any change in either of the two values can have an effect on the plan quality.

4.40. SQL 2080

Error <number> while reading file: <value> bytes were read from <text> when <value> were expected in module <name>.

Cause: Trafodion received error <number> while reading module <name>. <value> shows the number of bytes read from <text>. The module file is unusable. Either it has been corrupted or overwritten.

Effect: The operation fails.

Recovery: Recompile the module definition file, using the Trafodion compiler, to create a valid module file.

4.41. SQL 2081

Error <number> while opening file <name> for read.

Where <number> is the error number.

Where <name> is the name of the file.

Cause: Trafodion received error <number> while opening file <name> for read.

Effect: Trafodion does not open the file.

Recovery: Use the error number to diagnose and correct the problem.

4.42. SQL 2082

Error <number> while opening file <name> for write.

Where <number> is the error number.

Where <name> is the name of the file.

Cause: Trafodion received error <number> while opening file <name> for write.

Effect: Trafodion does not open the file.

Recovery: Use the error number to diagnose and correct the problem.

4.43. SQL 2083

Error <number> while naming or locating file <name>.

Where <number> is the error number.

Where <name> is the name of the file.

Cause: Trafodion received error <number> while naming or locating file <name>.

Effect: Trafodion does not name or locate the file.

Recovery: Use the error to diagnose and correct the problem.

4.44. SQL 2084

Error <number> while writing <value> bytes to file <name>.

Cause: Trafodion database software received error <number> while writing to file <name>. <value> shows the number of bytes being written.

Effect: Trafodion does not open the file.

Recovery: Use the error to diagnose and correct the problem.

4.45. SQL 2085

Error <number> was returned when closing file <name>.

Where <number> is the error number.

Where <name> is the name of the file.

Cause: Trafodion received error <number> when closing file <name>.

Effect: Trafodion does not close the file.

Recovery: Use the error number to diagnose and correct the problem.

4.46. SQL 2086

The file <name> could not be purged. This file contains the results of a failed compilation and should be purged.

Where <name> is the name of the file.

Cause: A compilation failed, and for some reason Trafodion database software was not able to purge the module file.

Effect: The module file is not valid and should not be used.

Recovery: Purge the file from the Trafodion platform.

4.47. SQL 2090

The command line argument for module name, <name-1>, is being ignored in favor of module name <name-2> in file <name-3>.

Where <name-1>, <name-2>, and <name-3> are module file names.

Cause: Trafodion ignored the command line argument for module <name-1>. Instead, it used the second module <name-2> in file <name-3>.

Effect: None.

Recovery: None.

4.48. SQL 2091

The required module statement was not found in file <name>.

Where <name> is the name of the file.

Cause: Trafodion could not find the required module statement in file <name>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

4.49. SQL 2092

A module statement has already appeared in this file. The previous definition, <name>, is being retained and this latest one ignored.

Where <name> is the name of the file.

Cause: You included more than one module statement. <name> will be used.

Effect: Trafodion ignores the second module statement.

Recovery: Informational message only; no corrective action is needed.

4.50. SQL 2093

A module timestamp statement was not found in file <name>.

Where <name> is the name of the file.

Cause: Trafodion did not find a module timestamp statement in the module definition file <name>.

Effect: Trafodion uses a default timestamp value of all zeros.

Recovery: Supply a timestamp and resubmit.

4.51. SQL 2094

A module timestamp statement has already appeared in this module. The previous timestamp is being retained and this latest one ignored.

Cause: You specified a timestamp statement twice in this module.

Effect: Trafodion uses the first timestamp.

Recovery: Informational message only; no corrective action is needed.

4.52. SQL 2095

Module file <name-1>, expected to contain module <name-2>, instead contains <name-3>.

Where <name-1>, <name-2>, and <name-3> are module file names.

Cause: Trafodion expected to find the first module <name-1>, but instead found the second module <name-2>, in file <name-3>.

Effect: Only the second module is compiled.

Recovery: None.

4.53. SQL 2096

A source file statement has already appeared in this module. The previous source file is being retained and this latest one ignored.

Cause: The Trafodion compiler was invoked on a module definition file that contains more than one SOURCE_FILE statement. A module definition can have only one SOURCE_FILE statement that specifies that module’s SQL source file.

Effect: The operation fails.

Recovery: Edit the module definition file so that it contains no more than one SOURCE_FILE statement, and rerun the Trafodion compiler on the module definition.

4.54. SQL 2097

Source file name is over 1024 characters long.

Cause: The Trafodion compiler was invoked on a module definition file that contains a SOURCE_FILE statement whose source path name has over 1024 characters.

Effect: The operation fails.

Recovery: Edit the module definition file so that its SOURCE_FILE statement’s source path name is no more than 1024 characters long. Rerun the Trafodion compiler on the module definition file.

4.55. SQL 2098

The <compilation-type> compilation completed with <value> warnings.

Cause: <compilation-type> completed with the number of warnings given as <value>.

Effect: None.

Recovery: Informational message only; no corrective action is needed.

4.56. SQL 2099

The <compilation-type> compilation failed with <value> errors and <value> warnings.

Cause: <compilation-type> failed with the number of errors and warnings given as <value>.

Effect: Any statement with an error is not compiled.

Recovery: If this is a warning, this is an informational message. Otherwise, correct the syntax and resubmit.

4.57. SQL 2100

Break was received. The compilation has been aborted.

Cause: Trafodion received a break and aborted the compilation.

Effect: Trafodion does not continue compilation.

Recovery: Informational message only; no corrective action is needed.

4.58. SQL 2102

This query could not be compiled with 'MINIMUM' optimization level. Suggestion: Retry with 'MEDIUM' optimization level.

Cause: Trafodion was unable to compile this query using the MINIMUM optimization level.

Effect: Trafodion is unable to process this query.

Recovery: Resubmit the query with MEDIUM optimization level. Precede the statement with: CONTROL QUERY DEFAULT OPTIMIZATION-LEVEL 'MEDIUM';

4.59. SQL 2103

This query could not be compiled for one/both of the following reasons: a) Use of 'MINIMUM' optimization level, or b) incompatible Control Query Shape specifications.

Cause: Trafodion was unable to compile this query, either because it was not able to use the MINIMUM optimization level or because you used an incompatible CONTROL QUERY SHAPE specification.

Effect: Trafodion is unable to process this query.

Recovery: If applicable, resubmit the query with MINIMUM optimization level. Precede the statement with:

CONTROL QUERY DEFAULT OPTIMIZATION-LEVEL 'MEDIUM'; Correct the CONTROL QUERY SHAPE specification and resubmit.

4.60. SQL 2104

This query could not be compiled for one of two reasons: a) incompatible Control Query Shape (CQS) specifications, or b) 'MEDIUM' optimization level is not sufficient to satisfy the CQS in effect. Suggestion: a) inspect the CQS in effect; or b) raise the optimization level to 'MAXIMUM'. Note that for this query, 'MAXIMUM' optimization level may result in a long compile time.

Cause: Trafodion was unable to compile this query, either because it was not able to use the MEDIUM optimization level or because you used an incompatible CONTROL QUERY SHAPE specification.

Effect: Trafodion is unable to process this query.

Recovery: If applicable, use the MAXIMUM optimization level, correct the CONTROL QUERY SHAPE specification, and resubmit.

4.61. SQL 2105

This query could not be compiled because of incompatible Control Query Shape (CQS) specifications. Inspect the CQS in effect.

Cause: Trafodion was unable to compile this query because you used an incompatible CONTROL QUERY SHAPE specification.

Effect: Trafodion is unable to process this query.

Recovery: Correct the CONTROL QUERY SHAPE specification and resubmit.

4.62. SQL 2106

This statement could not be compiled since it is too long. Break up large statements into smaller pieces.

Cause: Trafodion was unable to compile this query because it is too long.

Effect: Trafodion is unable to process this query.

Recovery: Try breaking the statement into smaller pieces.

4.63. SQL 2107

This statement could not be compiled. Suggestion: Address the issue(s) raised in the reported warning(s).

Cause: Trafodion was unable to compile the query.

Effect: The operation fails.

Recovery: Use the warning messages returned by the compiler to diagnose and correct the problem.

4.64. SQL 2108

Statement was compiled as if query plan caching were off.

Cause: Trafodion attempted to compile this query with query caching on but failed. It then successfully compiled this query with caching turned off.

Effect: Trafodion compiled the query as if query plan caching was turned off even though caching is currently on. The prepared query can be executed as usual.

Recovery: This is an informational message. To prevent this warning, turn off query caching before query preparation.

4.65. SQL 2200

DEFAULTS attribute <attribute> is read-only.

Where <attribute> is the DEFAULTS attribute.

Cause: You attempted to change the DEFAULTS <attribute>, which is read-only.

Effect: The operation fails.

Recovery: None.

4.66. SQL 2201

SQL compilation return code is <mxcmp-non-zero-exit-code>.

Cause: You invoked mxCompileUserModule on an application file that has an embedded module definition. An SQL compilation of an embedded module definition resulted in a Trafodion compiler nonzero exit code, indicating a warning or error.

Effect: The operation fails.

Recovery: Review the Trafodion compiler warning or error message. Trace the diagnostic back to the module source file and correct the offending source statement. Retry preprocessing, translating, compiling, and SQL compiling the application file.

4.67. SQL 2202

<application-file> is not an application (ELF or SQL) file.

Cause: You invoked mxCompileUserModule on an application file that is not a Trafodion platform ELF object file.

Effect: The operation fails.

Recovery: Verify that the name <application-file> is an ELF object file. Verify that the name of <application-file> is spelled correctly, and retry the command.

4.68. SQL 2203

Application file <application-pathname> cannot be opened.

Cause: You invoked mxCompileUserModule (or mxcmp -a <application-pathname> mdf) on an application that does not exist or is inaccessible to the user.

Effect: The operation fails.

Recovery: Verify that <application-pathname> exists and is readable by the user. Verify that <application-pathname> is spelled correctly, and retry the command.

4.69. SQL 2204

SQL compilation of <module-name> failed.

Where <module-name> is the name of the module.

Cause: You invoked mxCompileUserModule on an application file that has embedded module definition(s). The SQL compilation of the named embedded module definition produced a Trafodion compiler warning or error.

Effect: The operation fails.

Recovery: Review the Trafodion compiler warning or error. Trace the diagnostic back to the source file of the named module. Correct offending source statements. Retry preprocessing, translating, compiling, and SQL compiling the application file.

4.70. SQL 2205

A temporary filename could not be created.

Cause: You invoked mxCompileUserModule on an application file that has many embedded module definitions. The tool cannot create another temporary file name to hold the contents of an embedded module definition. The tool used tmpnam() to create a string that is not the name of an existing file which tmpnam() could not do.

Effect: The operation fails.

Recovery: Clean up TMPDIR (the directory where temporary files are created) by deleting unused temporary files. Retry the command.

4.71. SQL 2206

Temporary file <temp-filename> could not be created.

Where <temp-filename> is the name of the temporary file.

Cause: You invoked mxCompileUserModule on an application file that has many embedded module definitions.The tool cannot create another temporary file to hold the contents of an embedded module definition.

Effect: The operation fails.

Recovery: Verify that you have write access to TMPDIR (the directory where temporary files are created) and that TMPDIR has free space. Delete unused temporary files from TMPDIR and retry the command.

4.72. SQL 2207

-<option> is an unknown command line option.

Where -<option> is the command-line option.

Cause: You invoked mxCompileUserModule with an unrecognized command-line option.

Effect: The operation fails.

Recovery: Review the allowable command-line options by invoking

mxCompileUserModule. Verify that the desired command-line options are spelled correctly and retry the command.

4.73. SQL 2208

mxCompileUserModule requires an <application-filename>.

Cause: You invoked mxCompileUserModule without supplying an application file.

Effect: The operation fails.

Recovery: Invoke mxCompileUserModule on an application file, such as a Trafodion platform ELF object file.

4.74. SQL 2209

<string> is not a valid delimited identifier.

Cause: You invoked mxCompileUserModule using a command-line option allowing a delimited identifier, but the delimited identifier has an invalid character, such as the @ sign.

Effect: The operation fails.

Recovery: Remove invalid characters, such as the @ sign, from the delimited identifier and retry the command.

4.75. SQL 2210

Delimited identifier has no ending quote.

Cause: You invoked mxCompileUserModule using a command-line option allowing a delimited identifier, but the delimited identifier has no closing quote.

Effect: The operation fails.

Recovery: Make sure that the delimited identifier has a closing quote and retry the command.

4.76. SQL 2211

Lexical error: unknown symbol <character>.

Cause: You invoked mxCompileUserModule on an application file, possibly intending to SQL compile only a subset of its embedded module definitions, but you specified an unknown character in the module name list.

Effect: The operation fails.

Recovery: Review the module name list syntax. Verify that the module names are specified correctly and retry the command.

4.77. SQL 2212

A syntax error was encountered: expecting <string-1> instead of <string-2>.

Cause: You invoked mxCompileUserModule on an application file, intending to SQL compile only a subset of its embedded module definitions, but you specified an unexpected string in the module name list.

Effect: The operation fails.

Recovery: Review the module name list syntax, especially where string1 is expected. Verify that the list of module names are specified correctly and retry the command.

4.78. SQL 2213

A syntax error was encountered: expecting an identifier instead of <string>.

Cause: You invoked mxCompileUserModule on an application file, possibly intending to SQL compile only a subset of its embedded module definitions, but you specified an unexpected string in the module name list.

Effect: The operation fails.

Recovery: Review the module name list syntax, especially where an identifier is expected. Verify that the list of module names are specified correctly and retry the command.

4.79. SQL 2214

Internal error in mxCompileUserModule in file <filename> at line <linenumber>: <error-message>.

Cause: You invoked mxCompileUserModule on an application file to SQL compile its embedded module definitions. An internal error occurred during the operation.

Effect: The operation fails.

Recovery: None. Contact the Trafodion User Distribution List

4.80. SQL 2215

<identifier> is not a valid regular identifier.

Cause: You invoked mxCompileUserModule on an application file, possibly intending to SQL compile only a subset of its embedded module definitions, but you specified an invalid regular identifier in the module name list.

Effect: The operation fails.

Recovery: Review the module name list syntax, especially where an identifier is expected. Verify that the list of module names is specified correctly. Verify that regular identifiers used are not SQL reserved words and retry the command.

4.81. SQL 2220

<mxcmp-path> (MXCMP environment variable) does not exist or is not executable.

Where <mxcmp-path> is the Trafodion compiler environment variable.

Cause: You set your Trafodion compiler environment variable to point to your own Trafodion compiler and invoked mxCompileUserModule on an application file to SQL compile its module definitions. Your Trafodion compiler is not executable.

Effect: The operation fails.

Recovery: Verify that your Trafodion compiler exists and is executable and retry the command.

4.82. SQL 2221

SQL compiler invocation failed with return code <error-code>.

Where <error-code> is the error message code.

Cause: You invoked mxCompileUserModule on an application file to SQL compile its module definitions. This command invoked the Trafodion compiler, which returned error code, indicating an abnormal termination.

Effect: The operation fails.

Recovery: If the system is heavily loaded, retry the command later. If the problem persists under normal system load, report it as an internal error and contact user@trafodion.incubator.apache.org.

4.83. SQL 2222

SQL module <module-name> was not found in <application-filename>.

Where <module-name> is the requested module name.

Where <application-filename> is the requested application file.

Cause: You invoked mxCompileUserModule on an application file with a list of module names to SQL compile. This list includes the named module, which cannot be found in the application file.

Effect: The operation fails.

Recovery: Verify the spelling of the module name and retry the command.

4.84. SQL 2223

Application file <filename> does not exist or is not readable.

Where <filename> is the name of the application file.

Cause: You invoked mxCompileUserModule on the named application file, which does not exist or is not readable.

Effect: The operation fails.

Recovery: Verify the spelling of the application file name and retry the command.

4.85. SQL 2233

Query involves remote node <nodename> that is currently down. Compiler encountered a file system error <error-num>. It may produce a plan that is suboptimal or of incompatible version.

Where <nodename> is the name of the node such as node01.host.com on which the failure occurred.

Where <error-num> is the file system error number.

Cause: The <nodename> you specified is not available.

Effect: The compiler tried to produce a plan without using that node. This might result in a suboptimal plan.

Recovery: For information about file system errors, see File-System Errors.

4.86. SQL 2900

Error in file <filename> at line <number>.

Where <number> is the line number.

Cause: An error occurred in file name at line <number>.

Effect: Compilation failed because of a syntax error.

Recovery: This is a general error that is issued before a more specific error. Use the error that follows this one to diagnose and correct the problem.

5. Parser and Compilation Messages (3000 through 3999)

5.1. SQL 3001

Syntax error at or before <SQL-text>.

Cause: There is a syntax error near the text <SQL-text>.

Effect: The operation fails.

Recovery: See the errors that accompany this message for more information. Correct the syntax and resubmit.

5.2. SQL 3002

<column-name> is not a valid column reference; it has more than 4 name parts.

Cause: You specified an invalid column reference, which must have four or fewer parts.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.3. SQL 3003

Length or precision must be greater than zero.

Cause: You defined length or precision as zero. You must enter a value greater than zero.

Effect: The operation fails.

Recovery: Enter a value greater than zero and resubmit.

5.4. SQL 3004

A delimited identifier must contain at least one non-blank character.

Cause: You defined a delimited identifier as blanks. You must enter at least one non-blank character.

Effect: The operation fails.

Recovery: Enter at least one non-blank character and resubmit.

5.5. SQL 3005

A DECLARE CURSOR statement cannot dynamically get its cursor name from a host variable while also statically declaring a cursor specification. A dynamic cursor requires the name of a previously prepared statement or a host variable containing such a name; a static cursor requires a fixed, static name.

Cause: You attempted to use a DECLARE CURSOR statement without declaring a cursor name or using the name of a previously prepared statement.

Effect: The operation fails.

Recovery: Declare a cursor name, or use the name of a previously prepared statement, and resubmit.

5.6. SQL 3006

In a dynamic cursor declaration, both the cursor and the statement must be named in the same way: both must be literals or both must be string host variable expressions.

Cause: You attempted to declare a dynamic cursor in a way that does not match the statement. Both must be literals or both must be string host variable expressions.

Effect: The operation fails.

Recovery: Declare the cursor in a way that matches the statement and resubmit.

5.7. SQL 3007

In an ALLOCATE CURSOR statement, both the cursor and the statement must be named using string host variables.

Cause: You specified an ALLOCATE CURSOR statement with invalid syntax. Both the cursor and the statement must be named using string host variables.

Effect: The operation fails.

Recovery: Name the cursor and statement with string host variables and resubmit.

5.8. SQL 3008

Precision of <type> UNSIGNED data type, <value>, cannot exceed 9.

Cause: You specified a CREATE TABLE statement with a precision value greater than nine for the PRECISION field, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.9. SQL 3009

DROP ASSERTION statement is not yet supported.

Cause: You attempted to perform a DROP ASSERTION statement, which is not supported.

Effect: The operation fails.

Recovery: None.

5.10. SQL 3010

Character set <name> is not yet supported.

Where <name> is the name of the character set.

Cause: You specified character set <name> that is not supported for use in a Trafodion object, such as a table or module. Examples include creating a KANJI or KSC5601 column in a Trafodion table.

Effect: The operation fails.

Recovery: Specify a valid character set and resubmit.

5.11. SQL 3011

<name> is not a valid qualified name; it has more than 3 name parts.

Where <name> is the name specified in the operation.

Cause: You specified an invalid name <name>, which must have three or fewer parts. <catalog.schema.table> is valid. <catalog.schema.table.name> is invalid.

Effect: The operation fails.

Recovery: Correct the name and resubmit.

5.12. SQL 3012

COUNT is the only aggregate function that accepts (*) as an operand.

Cause: You submitted an AVG or other aggregate function that does not allow (*) as an operand. Only COUNT allows you to use (\*).

Effect: The operation fails.

Recovery: Remove the (*) operand and resubmit.

5.13. SQL 3013

Subtraction is the only operation allowed in the parenthesized expression preceding an interval qualifier.

Cause: You specified an expression with invalid syntax. Only subtraction is supported in the parenthesized expression that precedes an interval qualifier.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.14. SQL 3014

Precision of numeric, <value>, cannot exceed 18.

Cause: You defined a numeric item, <value>, with precision greater than 18, which is not supported.

Effect: The operation fails.

Recovery: Redefine the item with a precision value of 18 or less.

5.15. SQL 3015

Scale <value> cannot exceed precision <value>.

Cause: You defined a scale value with greater precision than Trafodion allows.

Effect: The operation fails.

Recovery: Redefine the scale with a precision value less than or equal to the allowable value.

5.16. SQL 3016

Precision of decimal, <value>, cannot exceed 18.

Cause: You gave a decimal item, <value>, with precision greater than 18, which is not supported.

Effect: The operation fails.

Recovery: Redefine the item with a precision value of 18 or less.

5.17. SQL 3017

An unsigned integer was expected, not <value>.

Cause: You specified an unexpected value, <value>. Trafodion requires an unsigned integer.

Effect: The operation fails.

Recovery: Replace the value with an unsigned integer and resubmit.

5.18. SQL 3018

An unsigned smallint was expected, not <value>.

Cause: You specified an unexpected value, <value>. Trafodion requires an unsigned smallint.

Effect: The operation fails.

Recovery: Replace the value with an unsigned smallint and resubmit.

5.19. SQL 3019

An unsigned number was expected within the parentheses, not <value>.

Cause: You specified an unexpected value, <value>. Trafodion requires an unsigned number.

Effect: The operation fails.

Recovery: Replace the value with an unsigned number and resubmit.

5.20. SQL 3020

An unsigned number was expected as the first operand within parentheses, not <value>.

Cause: You specified an unexpected value, <value>. Trafodion requires an unsigned number.

Effect: The operation fails.

Recovery: Replace the value with an unsigned number and resubmit.

5.21. SQL 3021

An unsigned number was expected as the second operand within parentheses, not <value>.

Cause: You specified an unexpected value, <value>. Trafodion requires an unsigned number.

Effect: The operation fails.

Recovery: Replace the value with an unsigned number and resubmit.

5.22. SQL 3022

The <name> operator is not yet supported.

Cause: You attempted to use an operator that is not supported.

Effect: The operation fails.

Recovery: None.

5.23. SQL 3023

The COLLATE clause in a sort specification is not yet supported.

Cause: You attempted to perform a COLLATE clause in a sort specification, which is not supported.

Effect: Trafodion ignores the COLLATE clause.

Recovery: Remove the COLLATE clause and resubmit.

5.24. SQL 3024

The MATCH PARTIAL clause is not yet supported.

Cause: You attempted to use a MATCH PARTIAL clause, which is not supported.

Effect: The operation fails.

Recovery: Remove the MATCH PARTIAL clause and resubmit.

5.25. SQL 3025

The format of the subvolume name part in the specified location name <name> is not valid. The subvolume name part must be eight characters long and begin with the letters ZSD.

Cause: You used an invalid location <name> for a subvolume that must be eight characters long and begin with the letters <ZSD>.

Effect: The operation fails.

Recovery: Correct the name and resubmit.

5.26. SQL 3026

A comma must be used to separate file attributes.

Cause: You made a syntax error in a list of file attributes, which must be separated by commas.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.27. SQL 3027

<name> is not a valid simple name; it has more than one name part.

Cause: You specified an invalid name <name>, which must have only one name part.

Effect: Trafodion could not prepare the statement.

Recovery: Correct the name and resubmit.

5.28. SQL 3028

Specifying a privilege column list in the INSERT clause is not yet supported.

Cause: You attempted to specify a privilege column list in an INSERT clause, which is not supported.

Effect: The operation fails.

Recovery: Remove the privilege column list and resubmit.

5.29. SQL 3029

<option> is not yet supported in referential integrity constraint definition.

Cause: You attempted to specify an <option> that is not supported in a referential integrity constraint definition.

Effect: The operation fails.

Recovery: Remove the option and resubmit.

5.30. SQL 3030

The PARALLEL EXECUTION clause is not yet supported.

Cause: You used the PARALLEL EXECUTION clause, which is not supported.

Effect: The operation fails.

Recovery: Remove the PARALLEL EXECUTION clause and resubmit.

5.31. SQL 3031

CASCADE drop behavior is not yet supported.

Cause: You attempted to drop an object with the CASCADE option, which is not supported.

Effect: The operation fails.

Recovery: Drop the item without CASCADE.

5.32. SQL 3032

The COLUMN clause in the ALTER TABLE statement is not yet supported.

Cause: You used the COLUMN clause in the ALTER TABLE statement, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.33. SQL 3033

The MOVE clause in the ALTER TABLE statement is not yet supported.

Cause: You used the MOVE clause in the ALTER TABLE statement, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.34. SQL 3034

The PARTITION clause in the ALTER TABLE statement is not yet supported.

Cause: You used the PARTITION clause in the ALTER TABLE statement, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.35. SQL 3035

The RENAME clause in the ALTER TABLE statement is not yet supported.

Cause: You used the RENAME clause in the ALTER TABLE statement, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.36. SQL 3036

The SET CONSTRAINT clause in the ALTER TABLE statement is not yet supported.

Cause: You used the SET CONSTRAINT clause in the ALTER TABLE statement, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.37. SQL 3037

Precision of type <data-type> cannot exceed 18.

Cause: You specified a CREATE TABLE statement with a precision value greater than 18 for <data-type>, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.38. SQL 3038

PIC X types cannot have leading signs, or any signs at all.

Cause: You specified a PIC X type with a sign, which is not supported.

Effect: The operation fails.

Recovery: Remove the sign, or redefine the type, and resubmit.

5.39. SQL 3039

PIC X types do not have any COMP representation.

Cause: You specified a PIC X type with COMP, which is not supported.

Effect: The operation fails.

Recovery: Remove the COMP, or redefine the type, and resubmit.

5.40. SQL 3040

Precision zero is not valid. Add a '9' to the PICTURE clause.

Cause: You specified an item with precision zero. You must add the number nine to the PICTURE clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.41. SQL 3041

UNSIGNED is not valid for a numeric or decimal type with a scale greater than 9.

Cause: You specified UNSIGNED for a numeric or decimal type that has a scale greater than nine, which is not supported.

Effect: The operation fails.

Recovery: Change the specification to SIGNED and resubmit.

5.42. SQL 3042

UPSHIFT for a numeric type is not valid.

Cause: You specified UPSHIFT for a numeric type, which is not supported.

Effect: The operation fails.

Recovery: Change the specification and resubmit.

5.43. SQL 3043

Precision greater than 18 for a COMP numeric type is not valid.

Cause: You specified a precision value greater than 18 for a COMP numeric type, which is not supported.

Effect: The operation fails.

Recovery: Change the precision to a value of 18 or less and resubmit.

5.44. SQL 3044

The interval <value> is not valid.

Cause: You specified an invalid interval <value>.

Effect: The operation fails.

Recovery: Correct the interval value to a valid one and resubmit.

5.45. SQL 3045

The date <value> is not valid.

Cause: You specified an invalid date <value>.

Effect: The operation fails.

Recovery: Change the date value and resubmit.

5.46. SQL 3046

The time <value> is not valid.

Cause: You specified an invalid time <value>.

Effect: The operation fails.

Recovery: Correct the time value and resubmit.

5.47. SQL 3047

The timestamp <value> is not valid.

Cause: You specified an invalid timestamp <value>.

Effect: The operation fails.

Recovery: Correct the timestamp value to a valid one and resubmit.

5.48. SQL 3048

Dynamic parameters, such as <name>, are not allowed in a static compilation.

Cause: You attempted to use parameters in a static compilation, which is not supported.

Effect: The operation fails.

Recovery: Remove the parameters and resubmit.

5.49. SQL 3049

Host variables, such as <name>, are not allowed in a dynamic compilation.

Cause: You attempted to use host variables in dynamic compilation, which is not supported.

Effect: The operation fails.

Recovery: Remove the host variables and resubmit.

5.50. SQL 3050

The constraint must have the same catalog and schema as the specified table.

Cause: You specified a constraint whose catalog and schema do not match the specified table.

Effect: The operation fails.

Recovery: Correct the syntax so that the constraint and table have the same catalog and schema.

5.51. SQL 3051

Duplicate HEADING clauses were specified in column definition <name>.

Cause: You defined column <name> with more than one HEADING clause.

Effect: The operation fails.

Recovery: Define the column with only one HEADING clause and resubmit.

5.52. SQL 3052

Duplicate NOT NULL clauses were specified in column definition <name>.

Cause: You defined column <name> with more than one NOT NULL clause.

Effect: The operation fails.

Recovery: Define the column with only one NOT NULL clause and resubmit.

5.53. SQL 3053

Duplicate PRIMARY KEY clauses were specified in column definition <name>.

Cause: You defined column <name> with more than one PRIMARY KEY clause.

Effect: The operation fails.

Recovery: Define the column with only one PRIMARY KEY clause and resubmit.

5.54. SQL 3054

The NOT DROPPABLE clause is allowed only in PRIMARY KEY and NOT NULL constraint definitions.

Cause: You specified a constraint with an invalid NOT DROPPABLE clause, which can appear only in PRIMARY KEY and NOT NULL constraint definitions.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.55. SQL 3055

Duplicate DELETE rules were specified.

Cause: You defined duplicate DELETE rules.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.56. SQL 3056

Duplicate UPDATE rules were specified.

Cause: You defined duplicate UPDATE rules.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.57. SQL 3057

The ALLOCATE value must be between 1 and <number>.

Cause: You provided an invalid size value in the ALLOCATE clause.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for correct size values, and resubmit.

5.58. SQL 3058

The BLOCKSIZE value must be 4096.

Cause: You defined a BLOCKSIZE with an invalid value. It must be 4096.

Effect: The operation fails.

Recovery: Correct the BLOCKSIZE value and resubmit.

5.59. SQL 3059

The specified size value (in the MAXSIZE clause or EXTENT size clause) is not valid.

Cause: You provided an invalid size value in the MAXSIZE clause.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for correct size values, and resubmit.

5.60. SQL 3060

The specified percentage value in the DSLACK clause is not valid.

Cause: You provided an invalid percentage value in the DSLACK clause.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for correct percentage values, and resubmit.

5.61. SQL 3061

The format of the specified location name <name> is not valid.

Cause: You provided a location <name> with an invalid format.

Effect: The operation fails.

Recovery: See the Trafodion SQL Reference Manual for correct name format, and resubmit.

5.62. SQL 3062

Duplicate EXTENT/MAXEXTENTS clauses were specified in the PARTITION clause.

Cause: You specified duplicate EXTENT/MAXEXTENTS clauses in the PARTITION clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.63. SQL 3063

Duplicate DSLACK clauses were specified in the PARTITION clause.

Cause: You specified duplicate DSLACK clauses in the PARTITION clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.64. SQL 3064

Duplicate ISLACK clauses were specified in the PARTITION clause.

Cause: You specified duplicate ISLACK clauses in the PARTITION clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.65. SQL 3065

The primary key constraint cannot be droppable when the STORE BY PRIMARY KEY clause appears in a table definition.

Cause: You defined a primary key as droppable in a table that includes STORE BY PRIMARY KEY in its definition, which is not supported.

Effect: Trafodion is unable to process this definition.

Recovery: Change the definition of the primary key constraint so that it is NOT DROPPABLE.

5.66. SQL 3067

ALTER TABLE ADD CONSTRAINT allows only DROPPABLE constraints.

Cause: You specified an ALTER TABLE ADD CONSTRAINT statement with NOT DROPPABLE constraints. Only DROPPABLE constraints are allowed.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.67. SQL 3068

The ALLOCATE and DEALLOCATE clauses cannot coexist in the same ALTER INDEX statement.

Cause: You specified an ALTER INDEX statement with both an ALLOCATE and a DEALLOCATE clause, which is not supported.

Effect: Trafodion ignores the ALTER INDEX statement.

Recovery: Correct the ALTER INDEX statement to include either ALLOCATE or DEALLOCATE.

5.68. SQL 3070

The [NO]AUDIT clause is not supported.

Cause: You specified the [NO]AUDIT clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.69. SQL 3071

Duplicate [NO]AUDITCOMPRESS clauses were specified.

Cause: You specified duplicate [NO]AUDITCOMPRESS clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.70. SQL 3072

The BLOCKSIZE clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

Cause: You specified an ALTER INDEX. . .ATTRIBUTE(S) statement that includes a BLOCKSIZE clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.71. SQL 3073

The [NO]BUFFERED clause is not supported.

Cause: You specified a [NO]BUFFERED clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.72. SQL 3074

The SEPARATE BY clause is not supported.

Cause: You specified the SEPARATE BY clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.73. SQL 3075

The [NO]COMPRESS clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

Cause: You specified an ALTER INDEX. . .ATTRIBUTE(S) statement that includes a [NO]COMPRESS clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.74. SQL 3076

Duplicate DEALLOCATE clauses were specified.

Cause: You specified duplicate DEALLOCATE clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.75. SQL 3077

The [NO]ICOMPRESS clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

Cause: You specified an ALTER INDEX. . .ATTRIBUTE(S) statement that includes the [NO]ICOMPRESS clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.76. SQL 3078

The LOCKLENGTH clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

Cause: You specified an ALTER INDEX. . .ATTRIBUTE(S) statement that includes the LOCKLENGTH clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.77. SQL 3079

Duplicate EXTENT/MAXEXTENTS clauses were specified.

Cause: You specified duplicate EXTENT/MAXEXTENT clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.78. SQL 3080

The [NO]SERIALWRITES clause is not supported.

Cause: You specified the [NO]SERIALWRITES clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.79. SQL 3081

Duplicate ALLOCATE clauses were specified.

Cause: You specified duplicate ALLOCATE clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.80. SQL 3082

Duplicate [NO]AUDIT clauses were specified.

Cause: You specified duplicate [NO]AUDIT clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.81. SQL 3083

Duplicate [NO]AUDITCOMPRESS clauses were specified.

Cause: You specified duplicate [NO]AUDITCOMPRESS clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.82. SQL 3084

The BLOCKSIZE clause is not allowed in the ALTER TABLE . . . ATTRIBUTE(S) statement.

Cause: You specified an ALTER TABLE. . .ATTRIBUTE(S) statement that includes the BLOCKSIZE clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.83. SQL 3085

Duplicate [NO]BUFFERED clauses were specified.

Cause: You specified duplicate [NO]BUFFERED clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.84. SQL 3086

Duplicate [NO]CLEARONPURGE clauses were specified.

Cause: You specified duplicate [NO]CLEARONPURGE clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.85. SQL 3087

The [NO]COMPRESS clause is not allowed in the ALTER TABLE . . .

ATTRIBUTE(S) statement.

Cause: You specified an ALTER TABLE. . .ATTRIBUTE(S) statement that includes the [NO]COMPRESS clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.86. SQL 3088

The ALLOCATE AND DEALLOCATE cannot coexist in the same ALTER TABLE statement.

Cause: You specified an ALTER TABLE statement with both ALLOCATE and DEALLOCATE clauses, which is not supported.

Effect: The operation fails.

Recovery: Correct the ALTER TABLE statement to include either ALLOCATE or DEALLOCATE.

5.87. SQL 3089

The [NO]ICOMPRESS clause is not allowed in the ALTER TABLE . . . ATTRIBUTE(S) statement.

Cause: You specified an ALTER TABLE. . .ATTRIBUTE(S) statement that includes the [NO]ICOMPRESS clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.88. SQL 3090

Duplicate LOCKLENGTH clauses were specified.

Cause: You specified a statement with duplicate LOCKLENGTH clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.89. SQL 3091

The [NO]AUDIT clause is not allowed in the CREATE INDEX statements.

Cause: You specified a CREATE INDEX statement with the [NO]AUDIT clause, which is not supported.

Effect: Trafodion ignores the CREATE INDEX statement.

Recovery: Correct the syntax and resubmit.

5.90. SQL 3092

Duplicate BLOCKSIZE clauses were specified.

Cause: You specified a statement with duplicate BLOCKSIZE clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.91. SQL 3093

Duplicate DCOMPRESS clauses were specified.

Cause: You specified a statement with duplicate DCOMPRESS clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.92. SQL 3094

The DEALLOCATE clause is not allowed in the CREATE INDEX statements.

Cause: You specified a CREATE INDEX statement that includes the DEALLOCATE clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.93. SQL 3095

Duplicate [NO]ICOMPRESS clauses were specified.

Cause: You specified a statement with duplicate [NO]ICOMPRESS clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.94. SQL 3096

Duplicate [NO]SERIALWRITES clauses were specified.

Cause: You specified a statement with duplicate [NO]SERIALWRITES clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.95. SQL 3097

The DEALLOCATE clause is not allowed in the CREATE TABLE statements.

Cause: You specified a CREATE TABLE statement that includes the DEALLOCATE clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.96. SQL 3098

Duplicate LOCATION clauses were specified.

Cause: You specified a statement with duplicate LOCATION clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.97. SQL 3099

Duplicate FILE ATTRIBUTE(S) clauses were specified.

Cause: You specified a statement with duplicate FILE ATTRIBUTE(S) clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.98. SQL 3100

Duplicate DSLACK clauses were specified.

Cause: You specified a statement with duplicate DSLACK clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.99. SQL 3101

Duplicate ISLACK clauses were specified.

Cause: You specified a statement with duplicate ISLACK clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.100. SQL 3102

Duplicate PARALLEL EXECUTION clauses were specified.

Cause: You specified a statement with duplicate PARALLEL EXECUTION clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.101. SQL 3103

Duplicate PARTITION clauses were specified.

Cause: You specified a statement with duplicate PARTITION clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.102. SQL 3104

Only the ADD option is allowed in a PARTITION clause in a CREATE TABLE statement.

Cause: You specified a CREATE TABLE statement with incorrect syntax. Only the ADD option is supported in a PARTITION clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.103. SQL 3105

Only range, hash, hash2 and system partitioning are currently supported.

Cause: You attempted to specify an invalid partitioning method. Currently only range, hash, hash2, and system partitioning are supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.104. SQL 3106

Duplicate PRIMARY KEY clauses were specified.

Cause: You specified a statement with duplicate PRIMARY KEY clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.105. SQL 3107

Duplicate LIKE clauses were specified.

Cause: You specified a statement with duplicate LIKE clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.106. SQL 3108

The LIKE clause and STORE BY clause cannot coexist in the same statement.

Cause: You specified a statement with both LIKE and STORE BY clauses, which is not supported.

Effect: The operation fails.

Recovery: Correct the statement to include one of these clauses.

5.107. SQL 3109

Duplicate STORE BY clauses were specified.

Cause: You specified a statement with duplicate STORE BY clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.108. SQL 3110

The LIKE clause and ATTRIBUTE(S) clause cannot coexist in the same statement.

Cause: You specified a statement with both LIKE and ATTRIBUTE(S) clauses, which is not supported.

Effect: The operation fails.

Recovery: Correct the statement to include one of these clauses.

5.109. SQL 3111

The LIKE clause and LOCATION clause cannot coexist in the same statement.

Cause: You specified a statement with both LIKE and LOCATION clauses, which is not supported.

Effect: The operation fails.

Recovery: Correct the statement to include one of these clauses.

5.110. SQL 3112

The LIKE clause and PARTITION clause cannot coexist in the same statement.

Cause: You specified a statement with both LIKE and PARTITION clauses, which is not supported.

Effect: The operation fails.

Recovery: Correct the statement to include one of these clauses.

5.111. SQL 3113

Error in CONTROL statement: <number>

Where <number> is the error number.

Cause: There is an error <number> in the CONTROL statement you specified.

Effect: The operation fails.

Recovery: Correct the CONTROL statement and resubmit.

5.112. SQL 3114

Transaction access mode READ WRITE is incompatible with isolation level READ UNCOMMITTED.

Cause: You specified a statement with both READ WRITE and READ UNCOMMITTED clauses, which is not supported.

Effect: The operation fails.

Recovery: Correct the statement to include one of these clauses.

5.113. SQL 3115

Duplicate ISOLATION LEVEL clauses were specified.

Cause: You specified a statement with duplicate ISOLATION LEVEL clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.114. SQL 3116

Duplicate transaction access mode clauses were specified.

Cause: You specified a statement with duplicate access mode clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.115. SQL 3117

Duplicate DIAGNOSTICS SIZE clauses were specified.

Cause: You specified a statement with duplicate DIAGNOSTICS SIZE clauses.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.116. SQL 3118

Specified identifier is too long.

Cause: You specified an identifier that is too long.

Effect: The operation fails.

Recovery: Shorten the identifier and resubmit.

5.117. SQL 3119

The WITH LOCAL CHECK OPTION clause is not supported.

Cause: You attempted to create a constraint with the WITH LOCAL CHECK OPTION clause, which is not supported.

Effect: The operation fails.

Recovery: Eliminate the WITH LOCAL CHECK OPTION clause and resubmit.

5.118. SQL 3120

The CREATE ASSERTION statement is not yet supported.

Cause: You specified the CREATE ASSERTION statement, which is not supported.

Effect: The operation fails.

Correct the syntax and resubmit.

5.119. SQL 3122

The system specified in the location clause <name> is not accessible.

Where <name> is the system name.

Cause: You specified an invalid <name>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.120. SQL 3123

The format of the file name part in the specified location name <name> is not valid. The file name part must be eight characters long and end with the digits 00.

Where <name> is the name of the file.

Cause: You specified an invalid file <name>. The file name must be eight characters long and end with the digits 00 (zero zero).

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.121. SQL 3127

An invalid character was found in identifier <name>.

Cause: You specified an identifier that includes an invalid character.

Effect: The operation fails.

Recovery: Correct the syntax of the identifier and resubmit.

5.122. SQL 3128

<object-name> is a reserved word. It must be delimited by double-quotes to be used as an identifier.

Where <object-name> is the identifier.

Cause: You used an identifier that is a reserved word. You must put it between double quotes (") to use it as an identifier.

Effect: The operation fails.

Enclose the identifier in double quotes or select another name that is not a reserved word.

5.123. SQL 3129

Function <name> accepts exactly one operand.

Where <name> is the name of the function.

Cause: You specified two operands for an aggregate function that accepts exactly one operand. Only VARIANCE and STDDEV support two operands.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.124. SQL 3130

The UNSIGNED option is not supported for LARGEINT type.

Cause: You attempted to define a LARGEINT data item with the UNSIGNED option, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.125. SQL 3131

The statement just entered is currently not supported.

Cause: You specified a statement that is not supported by Trafodion.

Effect: The operation fails.

Recovery: None.

5.126. SQL 3132

The HEADING for column <name> exceeds the maximum size of 128 characters.

Where <name> is the name of the column.

Cause: You specified a heading for column <name> that exceeds the maximum size of 128 characters.

Effect: The operation fails.

Correct the syntax and resubmit.

5.127. SQL 3133

PERFORM is valid only in COBOL programs.

Cause: You specified a PERFORM statement, which is supported only in COBOL programs.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.128. SQL 3134

The precision of time or timestamp, <value>, cannot exceed 6.

Cause: You specified a time or timestamp precision value that exceeds six, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.129. SQL 3135

The precision of float, <value>, cannot exceed 54.

Cause: You specified a value for float precision that exceeds 54, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.130. SQL 3136

Only LEFT, RIGHT, and FULL OUTER JOIN are valid in {oj . . .}

Cause: You attempted to perform an invalid outer join. Only LEFT, RIGHT, and FULL OUTER JOIN are supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.131. SQL 3137

UNION JOIN is not yet supported.

Cause: You attempted to perform a UNION JOIN, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.132. SQL 3138

A key-sequenced table with range partitioning requires a FIRST KEY clause.

Cause: You attempted to create a key-sequenced table with range partitioning without a FIRST KEY clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.133. SQL 3139

A range partitioned index requires a FIRST KEY clause.

Cause: You attempted to create a range-partitioned index without a required FIRST KEY clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.134. SQL 3140

The isolation level cannot be READ UNCOMMITTED for an INSERT,

UPDATE, DELETE, or DDL statement.

Cause: You attempted to perform an INSERT, UPDATE, DELETE, or DDL statement with a READ UNCOMMITTED isolation level, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.135. SQL 3141

The transaction access mode cannot be READ ONLY for an INSERT, UPDATE, DELETE, or DDL statement.

Cause: You attempted to perform an INSERT, UPDATE, DELETE, or DDL statement with a transaction access mode of READ ONLY, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.136. SQL 3142

INTO clause host variables not allowed in a static cursor.

Cause: You attempted to create a static cursor with INTO clause host variables, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.137. SQL 3143

BROWSE or READ UNCOMMITTED access is not allowed on a table value constructor.

Cause: You attempted to create a table value constructor with BROWSE or READ UNCOMMITTED access, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.138. SQL 3145

Positioned UPDATE or DELETE is allowed only in embedded SQL.

Cause: You attempted to perform a positioned UPDATE or DELETE, which is supported only in embedded Trafodion.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.139. SQL 3147

In an IN predicate whose right operand is a value list, the left operand must be scalar (degree of one).

Cause: You specified an IN predicate whose right operand is a value list but whose left operand is not scalar, which is required.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.140. SQL 3148

Environment variable <value> is being ignored because this version of the code is Release, not Debug. Actual query results will likely not match expected results.

Where <value> is the environment variable value specified.

Cause: Trafodion is ignoring the environment variable you specified. Query results might not match expected results.

Effect: None.

Recovery: Informational message only; no corrective action is needed.

5.141. SQL 3149

Duplicate WITH CONSTRAINTS phrases were specified in LIKE clause in CREATE TABLE statement.

Cause: The WITH CONSTRAINTS phrase appears multiple times within the LIKE clause of the CREATE TABLE statement, which is not supported.

Effect: The operation fails.

Recovery: Remove the duplicate WITH CONSTRAINTS phrases.

5.142. SQL 3150

Duplicate WITH HEADING phrases were specified in LIKE clause in CREATE TABLE statement.

Cause: The WITH HEADINGS phrase appears multiple times within the LIKE clause of the CREATE TABLE statement, which is not supported.

Effect: The operation fails.

Recovery: Remove the duplicate WITH HEADINGS phrases.

5.143. SQL 3151

Duplicate WITH HORIZONTAL PARTITIONS phrases were specified in LIKE clause in CREATE TABLE statement.

Cause: The WITH HORIZONTAL PARTITIONS phrase appears multiple times within the LIKE clause of the CREATE TABLE statement, which is not supported.

Effect: The operation fails.

Recovery: Remove the duplicate WITH HORIZONTAL PARTITIONS phrases.

5.144. SQL 3153

The FIRST KEY clause is not allowed with hash or hash2 partitioning.

Cause: You attempted to use the FIRST KEY clause with hash or hash2 partitioning, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.145. SQL 3155

The POPULATE and NO POPULATE clauses cannot coexist in the same CREATE INDEX statement.

Cause: You specified a CREATE INDEX statement using both the POPULATE or NO POPULATE clauses, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.146. SQL 3157

A catalog name is required.

Cause: You attempted to create a catalog without specifying a catalog name.

Effect: The operation fails.

Recovery: Specify a catalog name and resubmit.

5.147. SQL 3158

The DATETIME value <value> is not valid.

Cause: You specified an invalid DATETIME literal. Either the DATETIME qualifier has an invalid combination of start and end fields or the DATETIME literal string is invalid.

Effect: The operation fails.

Recovery: Specify a valid DATETIME literal and resubmit.

5.148. SQL 3159

If you intended <name> to be a character set specifier for a character string literal, you must remove the spaces in front of the single quote delimiter.

Where <name> is the character set specifier.

Cause: You apparently specified <name> as a character set specifier (for example, KANJI), but you placed a space in front of the single quote delimiter, which is not supported. For example, KANJI 'xyz' causes this error. KANJI’XYZ' does not.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.149. SQL 3160

<host-variable> was declared more than once in the procedure parameter list.

Cause: You declared <host-variable> more than once in the procedure parameter list.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.150. SQL 3161

<procedure-parameter> was not declared in the procedure parameter list.

Cause: You did not declare <procedure-parameter> in the parameter list, which is required.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.151. SQL 3162

Procedure parameter <name> was not used.

Where <name> is the name of the procedure parameter.

Cause: Trafodion did not use procedure parameter <name>.

Effect: None.

Recovery: Informational message only; no corrective action is needed.

5.152. SQL 3163

Host variable <name> appears more than once in the INTO list. Execution results will be undefined.

Where <name> is the host variable.

Cause: You specified an INSERT statement whose INTO list includes host variable <name> more than once.

Effect: Execution results are undefined.

Recovery: This is an informational message only. No corrective action is needed, but you might want to rewrite your query.

5.153. SQL 3164

There is a data type mismatch between output host variable and selected value.

Cause: A data type mismatch occurred between the output host variable and the selected value in the statement you specified.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.154. SQL 3165

The precision or exponent value specified in <value> was less than the minimum allowed or greater than the maximum allowed.

Cause: You specified a statement in which you exceed the min or max precision or the exponent <value>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.155. SQL 3166

The value specified in the float or double <value> was less than the minimum allowed or greater than the maximum allowed.

Cause: You specified a statement in which you exceed the min or max precision for float or double <value>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.156. SQL 3167

Duplicate [ NOT ] DROPPABLE clauses were specified.

Cause: You specified a statement with more than one [NOT] DROPPABLE clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.157. SQL 3168

The FOR . . . ACCESS clause is not allowed in a CREATE VIEW statement.

Cause: You specified a CREATE VIEW statement with the FOR . . . ACCESS clause, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.158. SQL 3169

<name> is not a known collation.

Cause: You attempted to use a collation that is not a known collation.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.159. SQL 3171

Transaction statements are not allowed in compound statements.

Cause: You specified a compound statement that contains transaction statements, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.160. SQL 3172

EXIT is not allowed in a compound statement.

Cause: You specified a compound statement that contains an EXIT command.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.161. SQL 3173

UPDATE STATISTICS is not allowed in a compound statement.

Cause: You specified a compound statement that contains an UPDATE STATISTICS command.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.162. SQL 3174

DDL statements are not allowed in compound statements.

Cause: You specified a compound statement that contains DDL statements.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.163. SQL 3175

Dynamic SQL statements are not allowed in compound statements.

Cause: You specified a compound statement that contains dynamic Trafodion statements.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.164. SQL 3176

Subqueries are not allowed in the IF Condition.

Cause: You specified an IF statement that contains a subquery.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.165. SQL 3177

Character set <name> requires an even number of characters in the length declaration of the data type.

Where <name> is the name of the character set.

Cause: You specified a character set with an odd number of characters in the length declaration of the data type.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.166. SQL 3178

One or more of the following external (host-language) data types incorrectly appears within the SQL query or operation: <name>.

Cause: You specified a Trafodion query or attempted to perform an operation with an incorrect data type.

The operation fails.

Correct the syntax and resubmit.

5.167. SQL 3179

Collation <name-1> is not defined on the character set <name-2>.

Where <name-1> is the name of the collation.

Where <name-2> is the character set name.

Cause: You attempted to used a collation name that is not defined on the character set. A valid collation name is required.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.168. SQL 3180

STREAM statements are not allowed in compound statements.

Cause: You specified a compound statement that contains a STREAM statement, which is not supported.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.169. SQL 3181

Specified name is not a valid three part ANSI name.

Cause: You specified an invalid logical name.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.170. SQL 3182

Extra semicolon(;) in a compound statement.

Cause: You specified an extra semicolon in a compound statement.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.171. SQL 3183

Duplicate <clause-name> clauses were specified.

Where <clause-name> is the clause specified.

Cause: You specified a CREATE PROCEDURE containing multiple occurrences of the <clause-name> clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.172. SQL 3184

An invalid SQLSTATE value <string-1> was found. Message: <string-2>

Where <string-1> is the illegal SQLSTATE value.

Cause: You attempted to use an illegal SQLSTATE value. A valid SQLSTATE value is a single quoted string value that begins with an "S" or an "s" followed by a four-digit integer.

Effect: The operation fails.

Recovery: Specify a valid SQLSTATE value and resubmit.

5.173. SQL 3185

SIGNAL parameter 3 must be of type string.

Cause: You attempted a SIGNAL statement with a third parameter that is not a quoted string.

Effect: The operation fails.

Recovery: Specify a parameter that is a quoted string and resubmit.

5.174. SQL 3186

<string>: Dynamic parameters and host variables are currently not allowed in DDL.

Where <string> is the dynamic parameter or host variable that was specified.

Cause: Trafodion does not support the use of dynamic parameters or host variables in DDL statements. The operation fails.

Recovery: Remove occurrences of dynamic parameters or host variables and resubmit.

5.175. SQL 3187

Specifying a specific stream with SET STREAM TIMEOUT is not allowed.

Cause: You attempted to use a SET STREAM TIMEOUT statement, which is not supported.

Effect: The operation fails.

Recovery: None.

5.176. SQL 3188

A NOT DROPPABLE primary key constraint must be defined when STORE BY primary key is specified.

Cause: You specified a STORE BY primary key but did not define a NOT DROPPABLE primary key.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.177. SQL 3189

Setting a lock timeout is not allowed on a view.

Cause: You attempted to set a lock timeout on a view, which is not supported.

Effect: The operation fails.

Recovery: None.

5.178. SQL 3192

Union operands <table-1> and <table-2> have different access/lock modes.

Cause: Trafodion attempted to compile a UNION query that has an access/lock mode that can be applied to both branches of the access/lock mode or only to the second branch of the UNION.

Effect: The access/lock mode is applied only to the second branch of the UNION.

Recovery: Specify that the access/lock mode apply to both branches and resubmit.

5.179. SQL 3193

SIGNAL SQLSTATE= <string>, message: <string-1>.

Where <string> is the SIGNAL SQLSTATE value.

Where <string-1> is the SIGNAL text message.

Cause: You attempted a SIGNAL statement. SIGNAL statements are commonly used as an action for a trigger in a compound statement or in a user application.

Effect: The operation fails.

Recovery: None.

5.180. SQL 3195

Table creation with data type <dtype> is not supported.

Where <dtype> is a data type specified for a column.

Cause: The data type specified for a column in a CREATE TABLE statement is not supported.

Effect: The operation fails.

Recovery: Correct the data and resubmit.

5.181. SQL 3196

Only one access clause for may be specified for a single table SELECT.

Cause: You specified two or more table-level access options for the same table reference.

Effect: The offending SQL statement is rejected with an error.

Recovery: Remove all but one of the table-level access options for each table reference.

5.182. SQL 3197

Only one lock clause may be specified for a single table SELECT.

Cause: You specified two or more table-level lock options for the same table reference. The offending SQL statement is rejected with an error.

Recovery: Remove all but one of the table-level access options for each table reference.

5.183. SQL 3199

Column <col-name> is incorrectly specified. Keywords ASCENDING and DESCENDING are not allowed in the partitioning key list.

Where <col-name> is the name of the column.

Cause: You cannot specify ordering for columns of a partitioning key clause.

Effect: The operation fails.

Recovery: Remove any of the following keywords from the columns specified in the PARTITION clause: ASCENDING, ASC, DESCENDING, DESC, and resubmit.

5.184. SQL 3201

EXTERNAL PATH clause is required.

Cause: In the CREATE PROCEDURE statement, you omitted the mandatory EXTERNAL PATH clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.185. SQL 3202

PARAMETER STYLE clause is required.

Cause: In the CREATE PROCEDURE statement, you omitted the mandatory PARAMETER STYLE clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.186. SQL 3203

LANGUAGE clause is required.

Cause: In the CREATE PROCEDURE statement, you omitted this mandatory LANGUAGE clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.187. SQL 3204

EXTERNAL NAME clause is badly formed.

Cause: In the CREATE PROCEDURE statement, the EXTERNAL NAME clause you specified does not conform to the required syntax.

Effect: Trafodion is unable to create the procedure.

Recovery: Correct the syntax and resubmit.

5.188. SQL 3205

EXTERNAL NAME clause is required.

Cause: In the CREATE PROCEDURE statement, you omitted the mandatory EXTERNAL NAME clause.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

5.189. SQL 3206

The name for an object of this type must be fully qualified, or set NAMETYPE ANSI.

Cause: In the CREATE PROCEDURE statement, you specified a partially qualified name when NAMETYPE was not set to ANSI.

Effect: The operation fails.

Recovery: Set NAMETYPE ANSI or fully qualify the name.

5.190. SQL 3207

Value for DYNAMIC RESULT SETS must be zero.

Cause: In the CREATE PROCEDURE statement, you specified the optional DYNAMIC RESULT SETS clause with nonzero value.

Effect: The operation fails.

Recovery: Remove the clause or use the value zero, and then resubmit.

5.191. SQL 3208

UNSIGNED numeric is not allowed for routine parameter.

Cause: In the CREATE PROCEDURE statement, one of the parameters you specified is an unsigned numeric.

Effect: The operation fails.

Recovery: Change the parameter specification to SIGNED.

5.192. SQL 3209

Maximum length of LONGWVARCHAR is <value>.

Cause: You attempted a CREATE TABLE table name (columnname longwvarchar(N)) where N >current MAX_LONG_WVARCHAR_DEFAULT_SIZE setting.

Effect: The operation fails.

Recovery: Decrease the CREATE TABLE statement’s longwvarchar column width N or increase the current MAX_LONG_WVARCHAR_DEFAULT_SIZE setting and resubmit.

5.193. SQL 3210

Minimum length of LONGWVARCHAR is <value>.

Cause: You attempted a CREATE TABLE table name (columnname longwvarchar(N)) where N < current MIN_LONG_WVARCHAR_DEFAULT_SIZE setting.

Effect: The operation fails.

Recovery: Increase the CREATE TABLE statement’s longwvarchar column width N or decrease the current MIN_LONG_WVARCHAR_DEFAULT_SIZE setting and resubmit.

5.194. SQL 3211

Maximum length of LONG VARBINARY is <value>.

Cause: You attempted a CREATE TABLE table name (columnname long varbinary(N)) where N > current MAX_LONG_VARCHAR_DEFAULT_SIZE setting.

Effect: The operation fails.

Recovery: Decrease the CREATE TABLE statement’s long varbinary column width N or increase the current MAX_LONG_VARCHAR_DEFAULT_SIZE setting and resubmit.

5.195. SQL 3212

Minimum length of LONG VARBINARY is <value>.

Cause: You attempted a CREATE TABLE table name (columnname long varbinary(N)) where N < current MIN_LONG_VARCHAR_DEFAULT_SIZE setting.

Effect: The operation fails.

Recovery: Increase the CREATE TABLE statement’s long varbinary column width N or decrease the current MIN_LONG_VARCHAR_DEFAULT_SIZE setting and resubmit.

5.196. SQL 3213

Maximum length of LONG VARCHAR is <value>.

Cause: You attempted a CREATE TABLE table name (columnname long varchar(N)) where N > current MAX_LONG_VARCHAR_DEFAULT_SIZE setting.

Effect: The operation fails.

Recovery: Decrease the CREATE TABLE statement’s long varchar column width N or increase the current MAX_LONG_VARCHAR_DEFAULT_SIZE setting and resubmit.

5.197. SQL 3214

Minimum length of LONG VARCHAR is <value>.

Cause: You attempted a CREATE TABLE table name (columnname long varchar(N) where N < current MIN_LONG_VARCHAR_DEFAULT_SIZE setting.

Effect: The operation fails.

Recovery: Decrease the CREATE TABLE statement’s long varchar column width N or increase the current MIN_LONG_VARCHAR_DEFAULT_SIZE setting and resubmit.

5.198. SQL 3215

Computed LONG VARCHAR length len1 is below minimum len2.

Cause: You attempted a CREATE TABLE table name (c1 longvarchar, c2 long varchar,. . .cn long varchar) and the computed long varchar columns' width is below the current MIN_LONG_VARCHAR_DEFAULT_SIZE setting.

Effect: The operation fails.

Recovery: Decrease the number of long varchar columns in the CREATE TABLE statement or increase the current MIN_LONG_VARCHAR_DEFAULT_SIZE setting and resubmit.

5.199. SQL 3216

Computed LONG WVARCHAR length <value-1> is below minimum <value-2>.

Cause: You attempted a CREATE TABLE table name (c1 longwvarchar, c2 longwvarchar,. . . cn longwvarchar) and the computed width for each of the longwvarchar columns falls below the current MIN_LONG_WVARCHAR_DEFAULT_SIZE setting.

Effect: The operation fails.

Recovery: Reduce the number of longwvarchar columns in the CREATE TABLE statement or increase the current MIN_LONG_WVARCHAR_DEFAULT_SIZE setting and resubmit.

5.200. SQL 3217

Character set <name> is not allowed in the <function-name> function.

Cause: You specified KANJI or KSC5601 character expressions to function LOWER, LCASE, UPPER, UPSHIFT, or UCASE.

Effect: The operation fails.

Recovery: Do not use KANJI or KSC5601 character expressions in these functions.

5.201. SQL 3218

A table reference cannot contain DELETE or UPDATE in a CREATE VIE statement.

Cause: A create view statement was issued with a delete or update operation as a table reference.

Effect: The statement does not compile.

Recovery: Do not use delete or update in a CREATE view statement.

5.202. SQL 3220

SHOWDDL failed for object <object-name> because an SQL/MP display option was used on a {project-name} object.

Where <object-name> specifies the ANSI name of a table, view, or ALIAS.

Cause: SHOWDDL was given the display option with a Trafodion table given as an argument.

Effect: SHOWDDL does not display output.

Recovery: Reissue the command without the display option or specify an object.

5.203. SQL 3225

SHOWLABEL failed for object <object-name>. The object does not exist in the given namespace <name-space>, the object is not accessible, or the object type is not supported. SHOWLABEL supports only {project-name} tables, views and indexes.

Where <object-name> is the specified name of an object.

Where <name-space> is either the TABLE or INDEX namespace. The default namespace for SHOWLABEL is TABLE.

Cause: SHOWLABEL was unable to find the object in the namespace namespace, the object is not accessible, or the object is unsupported. The table namespace is used as the default.

Effect: SHOWLABEL does not display output.

Recovery: Reissue the command with an object name and corresponding namespace of a valid, supported, and accessible object.

5.204. SQL 3226

SHOWLABEL failed for physical location name <location-name>. Object does not exist or object type is not supported. SHOWLABEL supports only {project-name} tables, views, and indexes.

Where <location-name> specifies the physical location name of a Trafodion object.

Cause: SHOWLABEL was given an invalid physical location as an argument.

Effect: SHOWLABEL does not display output.

Recovery: Reissue the command with a valid location name.

5.205. SQL 3228

SHOWLABEL failed for physical location name <location-name>. SHOWLABEL supports only the data forks of {project-name} tables, views, and indexes.

Where <location-name> specifies the physical location name of a Trafodion object.

Cause: SHOWLABEL supports only the physical names of data forks of Trafodion objects (physical location names that end in "00"). SHOWLABEL does not support resource forks.

Effect: SHOWLABEL does not display output.

Recovery: Reissue the command with a valid location name.

5.206. SQL 3229

SHOWLABEL failed for object <name>. SHOWLABEL does not support synonyms.

Cause: The requested operation is not allowed on synonyms.

Effect: The operation fails.

Recovery: Try the command using the reference object name.

5.207. SQL 3230

The synonym must be defined in the same catalog as the specified table or view.

Cause: You specified a synonym that has a different catalog than the object.

Effect: The operation fails.

Recovery: Correct the syntax so that the synonym and the object have the same catalog and schema values.

5.208. SQL 3400

Invalid code point value for character set <name>.

Cause: There is an undefined character in the character set.

Effect: The operation fails.

Recovery: Remove the invalid character and resubmit.

5.209. SQL 3401

Hexadecimal representation of string literals associated with character set <name> is not supported.

Cause: You used a hexadecimal format to represent a character string that is not supported by Trafodion.

Effect: The operation fails.

Recovery: Do not use a hexadecimal format for the character set you specified.

5.210. SQL 3402

The format of the <value> hexadecimal string literal is not valid.

Cause: You either used illegal hexadecimal digits, supplied an odd number of hexadecimal digits, or misplaced space separators.

Effect: The operation fails.

Recovery: Specify the string in the correct hexadecimal format and resubmit.

5.211. SQL 3403

Function <name-1> does not take an operand with character set <name-2>.

Cause: You specified a character operand with a character set that the function does not support.

Effect: The operation fails.

Recovery: Do not use the character operand with that character set in the function.

5.212. SQL 3404

Character set <name>, to which SQL_TEXT is aliased, is not allowed for a SQL module.

Cause: You specified SQL_TEXT as the module character name set. SQL_TEXT is synonymous with UCS2, which is not supported.

Effect: The operation fails.

Recovery: Replace SQL_TEXT with ISO88591 and resubmit.

5.213. SQL 3405

A logical partition name cannot be specified in the LOCATION clause of the CREATE statement of this object.

Cause: You cannot specify the logical partition name in the LOCATION clause of the create statement of catalog, procedure, view and materialized view object types.

Effect: The operation fails.

Recovery: Remove the logical partition name syntax from the LOCATION clause and resubmit.

5.214. SQL 3406

A DDL statement could not be translated into a statement consisting of single-byte characters for processing.

Cause: The DDL statement coded in unicode contains non-ISO88591 characters. Trafodion does not support arbitrary unicode characters.

Effect: The operation fails.

Recovery: Remove non-ISO88591 characters and resubmit.

5.215. SQL 3411

Expressions are not allowed as IDENTITY column values. Specify DEFAULT or supply a largeint value.

Cause: Tried to specify an expression in place of a constant largeint value or DEFAULT.

Effect: The operation failed.

Recovery: Specify DEFAULT or supply a largeint value.

5.216. SQL 3412

IDENTITY column <column-name> must be the primary key or must have a unique index on it.

Cause: Tried to INSERT a system generated value for the IDENTITY column, which does not have a unique index on it.

Effect: The operation failed.

Recovery: Create a unique index on the IDENTITY column. Note that the unique index must only be on the IDENTITY column.

5.217. SQL 3413

The NOT NULL constraint on IDENTITY column <column-name> must be NOT DROPPABLE.

Cause: Specified DROPPABLE attribute on the NOT NULL constraint on the IDENTITY column.

Effect: The operation failed.

Recovery: Specify NOT DROPPABLE attribute on the NOT NULL constraint on the IDENTITY column.

5.218. SQL 3414

For an IDENTITY column <column-name>, the tuple list cannot have mixed user specified and DEFAULT values. Specify values for all or specify DEFAULT for all.

Cause: Provided mixed user specified and DEFAULT values in a tuple list for the IDENTITY column.

Effect: The operation failed.

Recovery: Specify values for all the tuples in the list or specify DEFAULT for all the tuples in the list.

6. Optimizer Messages (6000 through 6999)

6.1. SQL 6001

DISTINCT aggregates can be computed for only one column per table expression.

Cause: You attempted to compute DISTINCT aggregates for more than one column.

Effect: DISTINCT aggregates can be computed only for one column per table expression.

Recovery: Correct syntax and resubmit.

6.2. SQL 6002

The metadata table HISTOGRAMS or HISTOGRAM_INTERVALS contains invalid values. If you have manually modified the metadata table, then you should undo your changes using the CLEAR option in UPDATE STATISTICS.

Cause: You have manually modified the metadata table, and now it contains invalid values.

Effect: Trafodion is unable to complete compilation.

Recovery: Undo your changes using the CLEAR option in UPDATE STATISTICS.

6.3. SQL 6003

The metadata table HISTOGRAMS or HISTOGRAM_INTERVALS contains invalid boundary value <value> for column <name>. If you have manually modified the metadata table, then you should undo your changes using the CLEAR option in UPDATE STATISTICS.

Cause: You have manually modified the metadata table, and now it contains an invalid boundary value.

Effect: The Trafodion database uses default histograms to compile the query. This is a warning message.

Recovery: Undo your changes using the CLEAR option in UPDATE STATISTICS.

6.4. SQL 6007

Multi-column statistics for columns <names> from table <name> were not available; as a result, the access path chosen might not be the best possible.

Cause: Statistics are not available for the multicolumn join you are performing.

This message appears when the user has not updated statistics for column <names> and when the row count in table <name> is more than the value of the defaults table constant HIST_ROWCOUNT_REQUIRING_STATS. If you want to suppress this message, set that value to a very large number, and you will see this message only for tables with more rows than that, and for which there are no updated statistics.

Effect: None. This is a warning message.

Recovery: None.

6.5. SQL 6008

Statistics for column <name> were not available. As a result, the access path chosen might not be the best possible.

Cause: Statistics are not available for the statement you specified.

This message appears when the user has not updated statistics for column <name> and when the ROWCOUNT in the table is more than the value of the defaults table constant HIST_ROWCOUNT_REQUIRING_STATS. If you want to suppress this message, set that value to a very large number, and you will see this message only for tables with more rows than that, and for which there are no updated statistics.

Effect: None. This is a warning message.

Recovery: None.

7. Generator Messages (7000 through 7999)

7.1. SQL 7001

Default value <value> is not valid for column <name>.

Cause: You attempted to create a table with an invalid default <value> for column <name>.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

7.2. SQL 7003

A plan using cluster sampling could not be produced for this query.

Cause: You can use cluster sampling in a query only on a base table result set and only if there is no WHERE clause in the SELECT statement. This query does not satisfy these conditions.

Effect: Trafodion is unable to compile the query.

Recovery: Rewrite the query (for example, using nested queries) so that cluster sampling is performed on a base table with no WHERE-clause predicate.

8. Executor Messages (8000 through 8999)

8.1. SQL 8006

The stream timed out, but the cursor is still open.

Cause: A cursor is still open although its stream timed out.

Effect: The operation fails.

Recovery: Close the cursor before trying to open it.

8.2. SQL 8007

The operation has been canceled.

Cause: You pressed the break key.

Effect: The operation stops.

Recovery: None.

8.3. SQL 8012

Encoding of CONTROL QUERY DEFAULTs: <encoding>.

Cause: Trafodion displays an internal CONTROL QUERY DEFAULT encoding.

Effect: None.

Recovery: This is an informational message only; no corrective action is needed.

8.4. SQL 8016

An attempt was made to access <name> which has a system version that is incompatible with the version of the accessing software.

Cause: You attempted to access a system version that is incompatible with the version of the accessing software.

Effect: The operation fails.

Recovery: The system you are trying to access must be on a system version that is compatible with your accessing software. Upgrade that system.

8.5. SQL 8017

Explain information is not available for this query.

Cause: The explain default has been turned off for this query.

Effect: Trafodion is not able to display explain information.

Recovery: Turn the explain default on for this query.

8.6. SQL 8101

The operation is prevented by check constraint <name-1> on table <name-2>.

Where constraint <name-1> is the name of the constraint.

Where table <name-2> is the name of the table.

Cause: You attempted to perform an operation on table <name-1> that is prevented by check constraint <name-2>.

Effect: The operation fails.

Recovery: Change the data you are attempting to enter to be consistent with the constraint.

8.7. SQL 8102

The operation is prevented by a unique constraint.

Cause: You attempted to perform an operation that is prevented by a unique constraint.

Effect: Trafodion could not perform the operation.

Recovery: Make the data you enter unique to be consistent with the constraint.

8.8. SQL 8103

The operation is prevented by referential integrity constraint <name-1> on table <name-2>.

Where <name-1> is the name of the constraint.

Where <name-2> is the name of the table.

Cause: You attempted to perform an operation on table <name-1> that is prevented by referential integrity constraint <name-2>.

Effect: The operation fails.

Recovery: Change the data you are attempting to enter to be consistent with the constraint. The data must exist in another table. For example, if you are trying to enter a department number for an employee, the department number must exist in a department number table.

8.9. SQL 8104

The operation is prevented by the check on view <name-1> cascaded from the check option on <name-2>.

Where view <name-1> is the name of the view.

Where <name-2> is the name of the table.

Cause: You attempted to perform an operation on table <name-1>. The operation has been prevented by the check on view <name-2>, cascaded from the check option on the table.

Effect: The operation fails.

Recovery: Change the view properties, if appropriate.

8.10. SQL 8105

The operation is prevented by the check option on view <name>.

Where <name> is the name of the view.

Cause: You attempted to perform an operation on table name that is prevented by the check option on view <name>.

Effect: The operation fails.

Recovery: Insert into the base table rather than this view.

8.11. SQL 8302

All partitions of <type> <object> are unavailable.

Where <type> is the type of the affected object, such as table.

Where <object> is the fully qualified ANSI name of the affected object.

Cause: Late name resolution could not resolve the ANSI name to an available partition.

Effect: The operation fails.

Recovery: Determine why none of the partitions were available, then correct the error and resubmit.

8.12. SQL 8553

Stream overflow; subscription rate has fallen too far behind publishing rate.

Cause: The table used by the streaming cursor has overflowed.

Effect: The cursor or statement is closed.

Recovery: Reopen the statement or cursor and resume subscribing.

8.13. SQL 8573

8573 The user does not have <level> privilege on table or view <name>.

Where <level> is the user privilege level.

Where <name> is the name of the object.

Cause: You attempted to perform an operation on object <name>, for which you do not have a sufficient privilege <level>.

Effect: The operation fails.

Recovery: None. Have the system administrator change your privilege level, if appropriate.

8.14. SQL 8576

Statement was recompiled.

Cause: Trafodion recompiled the statement.

Effect: The operation fails.

Recovery: Recompile the program.

8.15. SQL 8577

Table, index or view <name> was not found.

Where <name> is the name of the object.

Cause: Trafodion could not find the object <name>.

Effect: The operation fails.

Recovery: Verify the location of the object and resubmit.

8.16. SQL 8578

Similarity check passed.

Cause: The similarity check passed.

Effect: None.

Recovery: Informational message only; no corrective action is needed.

8.17. SQL 8579

Similarity check failed: <name>

Cause: The similarity check failed.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

8.18. SQL 8604

Transaction subsystem <name> returned error <number> while starting a transaction.

Where <name> is the subsystem name.

Where <number> is the error number.

Cause: Transaction subsystem <name> has returned error <number> while starting a transaction.

Effect: The operation fails.

8.19. SQL 8605

Committing a transaction which has not started.

Cause: You attempted to commit a transaction that has not been started.

Effect: The operation fails.

Recovery: Correct the syntax so that the transaction is started before it is committed, and resubmit.

8.20. SQL 8606

Transaction subsystem <name> returned error <number> on a commit transaction.

Where <name> is the name of the subsystem.

Where <number> is the error number.

Cause: Transaction subsystem <name> has returned error <number> while committing a transaction.

Effect: The operation fails.

8.21. SQL 8607

Rolling back a transaction that has not started.

Cause: You attempted to roll back a transaction that has not started.

Effect: The operation fails.

Recovery: Correct the syntax so that the sequence of events is correct, and resubmit.

8.22. SQL 8608

Transaction subsystem <name> returned error <number> on rollback transaction.

Where <name> is the name of the subsystem.

Where <number> is the error number.

Cause: Transaction subsystem <name> has returned error <number> while rolling back a transaction.

Effect: The operation fails.

8.23. SQL 8609

Waited rollback performed without starting a transaction.

Cause: You attempted to perform a waited rollback on a transaction that has not started.

Effect: The operation fails.

Recovery: Correct the syntax so that the sequence of events is correct, and resubmit.

8.24. SQL 8610

Transaction subsystem <name> reported error <number> on a waited rollback transaction.

Where <name> is the name of the subsystem.

Where <number> is the error number.

Cause: Transaction subsystem <name> has returned error <number> while performing a waited rollback transaction. Effect: The operation fails.

8.25. SQL 8612

Transaction mode cannot be set if the transaction is already running.

Cause: You attempted to set the transaction mode, but the transaction is already running.

Effect: The operation fails.

Recovery: Abort and restart the transaction if you must change its mode.

8.26. SQL 8613

SQL cannot commit or rollback a transaction that was started by application.

Cause: An application started a transaction outside of Trafodion that Trafodion could not commit or rollback.

Effect: The operation fails.

Recovery: The application that started the transaction must perform a commit or rollback. Trafodion must start any transactions it will later commit or rollback.

8.27. SQL 8808

Module file <name> contains corrupted or invalid data.

Where <name> is the name of the file.

Cause: Trafodion has detected corrupted or invalid data in the module file <name>.

Effect: Trafodion could not execute the file.

Recovery: Recompile the .mdf file, using the Trafodion compiler, to create a valid module file.

8.28. SQL 8809

Open of the module file <name> failed with error <number>.

Where <name> is the name of the file.

Where <number> is the error number returned.

Cause: Trafodion was unable to open module file <name>.

Effect: The operation fails.

Recovery: Check the location of the module file and retry the operation.

8.29. SQL 8819

Begin transaction failed while preparing the statement.

Cause: This is an internal error.

Effect: The operation fails.

Recovery: None. Contact user@trafodion.incubator.apache.org.

8.30. SQL 8820

Transaction commit failed while closing the statement.

Cause: This is an internal error.

Effect: The operation fails.

Recovery: None. Contact user@trafodion.incubator.apache.org.

8.31. SQL 8821

Rollback transaction failed during the process of fetching the statement.

Cause: This is an internal error.

Effect: The operation fails.

Recovery: None. Contact user@trafodion.incubator.apache.org.

8.32. SQL 8824

The input <module-id> does not have a module name.

Cause: A module name was not passed into the module ID structure that was passed in.

Effect: The operation fails.

Recovery: Make sure a module name is passed into the module ID structure.

8.33. SQL 8826

The module could not be added.

Cause: This is an internal error.

Effect: The operation fails.

Recovery: None. Contact user@trafodion.incubator.apache.org.

8.34. SQL 8827

The request <name> could not be sent.

Where <name> is the name of the request.

Cause: Trafodion was unable to send request <name>.

Effect: The operation fails.

Recovery: Use the errors that accompany this one to diagnose and correct the problem.

8.35. SQL 8832

Transaction has not been started.

Cause: A transaction has not been started.

Effect: The operation fails.

Recovery: Verify that the transaction has been started or start it if it has not been.

8.36. SQL 8833

The input parameter is an invalid SQL transaction command.

Cause: This is an internal error.

Effect: The operation fails.

Recovery: None. Contact user@trafodion.incubator.apache.org.

8.37. SQL 8834

The SQL installation directory could not be found. Operating system error <number>.

Where <number> is the error number.

Cause: Trafodion was unable to find the Trafodion installation directory and received an operating system error <number>.

Effect: The operation fails.

Recovery: Locate the Trafodion installation directory, correct your syntax, and resubmit.

8.38. SQL 8836

Application specified an invalid update column for cursor.

Cause: There is an error in the program that this code is embedded in. The build might not have completed correctly.

Effect: The operation fails.

Recovery: Verify that the build was successful and resubmit.

8.39. SQL 8837

The user id passed in is invalid.

Cause: The value of the user ID passed in is not valid.

Effect: The operation fails.

Recovery: Make sure that the user ID of the form group id | name, user id | user name, and that the password is valid and exists on the current system.

8.40. SQL 8840

Object name provided to CLI is not valid.

Cause: The object named provided to CLI is invalid

Effect: The operation fails.

Recovery: Correct the object name and resubmit.

8.41. SQL 8841

User application committed or aborted a transaction started by SQL. This transaction needs to be committed or aborted by calling SQL COMMIT or ROLLBACK WORK.

Cause: Trafodion started a transaction that was committed or aborted by an embedded program, rather than by Trafodion.

Effect: The operation fails.

Recovery: Commit or abort the transaction by calling SQL COMMIT or ROLLBACKWORK.

8.42. SQL 8842

The cursor, <name>, referenced by this statement is not found or is not updatable.

Where <name> is the name of the cursor.

Cause: There is an error in the program that this code is embedded in. The build might not have completed successfully.

Effect: The operation fails.

Recovery: Verify that the build was successful and resubmit.

8.43. SQL 8846

An empty SQL statement was passed in.

Cause: The SQL source statement passed to the compiler to do the prepare was empty.

Effect: The operation fails.

Recovery: You must pass in a valid SQL source statement.

8.44. SQL 8850

The table specified in this cursor update or delete statement is different than the table specified in the declare cursor statement.

Cause: The table specified in the update or DELETE statement is not the same as the one specified in the declare cursor statement, as is required.

Effect: The operation fails.

Recovery: Correct the syntax and resubmit.

8.45. SQL 8860

Module file <name> has an obsolete module header.

Where <name> is the file name.

Cause: The module file <name> has an obsolete module header.

Effect: The operation fails.

Recovery: Rebuild the module file and resubmit.

8.46. SQL 8861

Module file <name> has an obsolete descriptor location table header.

Where <name> is the file name.

Cause: The module file <name> has an obsolete table header.

Effect: The operation fails.

Recovery: Rebuild the module file and resubmit.

8.47. SQL 8862

Module file <name> has an obsolete descriptor location table entry.

Where <name> is the file name.

Cause: The module file <name> has an obsolete descriptor location table entry.

Effect: The operation fails.

Recovery: Rebuild the module file and resubmit.

8.48. SQL 8863

Module file <name> has an obsolete descriptor header.

Where <name> is the file name.

Cause: The module file <name> has an obsolete descriptor header.

Effect: The operation fails.

Recovery: Rebuild the module file and resubmit.

8.49. SQL 8864

Module file <name> has an obsolete descriptor entry.

Where <name> is the file name.

Cause: The module file <name> has an obsolete descriptor entry.

Effect: The operation fails.

Recovery: Rebuild the module file and resubmit.

8.50. SQL 8865

Module file <name> has an obsolete procedure location table header.

Where <name> is the file name.

Cause: The module file <name> has an obsolete procedure location table header.

Effect: The operation fails.

Recovery: Rebuild the module file and resubmit.

8.51. SQL 8866

Module file <name> has an obsolete procedure location table entry.

Where <name> is the file name.

Cause: The module file <name> has an obsolete procedure location table entry.

Effect: The operation fails.

Recovery: Rebuild the module file and resubmit.

8.52. SQL 8867

An error while reading from file <name>.

Where <name> is the file name.

Cause: Trafodion encountered an error while reading the module file <name>.

Effect: The operation fails.

Recovery: Rebuild the module file and resubmit.

8.53. SQL 8882

Containing SQL is not permitted.

Cause: A stored procedure registered with the NO SQL attribute attempted to access Trafodion.

Effect: The corresponding SQL request is rejected.

Recovery: Either change the definition of the stored procedure to allow SQL access, or determine why the stored procedure contains Trafodion statements that might be called while the stored procedure is executing.

8.54. SQL 8888

The underlying insert, update, or delete operation of cursor <cursor-name> is still in progress. Since the cursor is being closed before the operation is complete, all affected rows will be rolled back.

<cursor-name> is the cursor being closed.

Cause: A cursor with an underlying insert, delete, or update operation was closed before the operation was complete.

Effect: The cursor was closed but all rows affected by opening this cursor have been rolled back.

Recovery: OPEN the cursor again and FETCH all rows until SQLCODE = 100 is returned.

8.55. SQL 8890

The SQL compiler failed to initialize properly. Query results may differ from what is expected, due to different compiler defaults.

Cause: The Trafodion compiler failed to correctly initialize.

Effect: Query results might be affected.

Recovery: Stop the Trafodion and restart it.

8.56. SQL 8901

The MXUDR server for this statement is no longer running. The statement will be assigned a new MXUDR server if it is executed again.

Cause: During execution of a Trafodion statement, an attempt was made to contact a nonexistent Trafodion UDR server.

Effect: The operation fails.

Recovery: Retry the Trafodion statement.

8.57. SQL 8904

{project-name} did not receive a reply from MXUDR, possibly caused by internal errors while executing user-defined routines.

Cause: During execution of a Trafodion statement, the Trafodion did not receive an expected reply from the Trafodion UDR server.

Effect: The operation fails.

Recovery: Verify that the Trafodion UDR server is running. If not, the Trafodion statement will acquire a new Trafodion UDR server when it is next executed.

9. Sort Messages (9200 through 10049)

9.1. SQL 9200

UPDATE STATISTICS encountered an error from statement <name>.

Cause: UPDATE STATISTICS encountered an error from the Trafodion statement <name>.

Effect: The operation fails.

Recovery: Other error messages will appear with this one, depending on what statement caused the error. Use them to diagnose and correct the problem.

9.2. SQL 9201

Unable to DROP object <name>.

Cause: UPDATE STATISTICS encountered an error during a DROP of the object <name>.

Effect: Trafodion is unable to continue processing.

Recovery: Resubmit the statement. If this does not correct the problem, stop and restart Trafodion. If this does not correct the problem, contact user@trafodion.incubator.apache.org.

9.3. SQL 9202

UPDATE STATISTICS has located previously generated histograms that are not being regenerated. This may affect the plans that will be generated. Missing column lists are <column-list>.

Cause: UPDATE STATISTICS has located previously generated histograms that are not being regenerated.

Effect: Processing continues without interruption.

Recovery: Remove or replace previously generated histograms by performing either one of these two recovery actions:

  • Re-execute the same UPDATE STATISTICS command, but also include the <column-list> from the message.

  • Perform UPDATE STATISTICS FOR the table. Then re-execute UPDATE STATISTICS with the column lists in which you are interested.

9.4. SQL 9203

Column names must be unique when specified in column list: (<name>).

Cause: You specified a non unique column name in the specified column list.

Effect: Trafodion is unable to continue processing.

Recovery: Correct the syntax and resubmit.

9.5. SQL 9204

Invalid option <option> specified. Value must be <range>.

Cause: You specified an invalid option for UPDATE STATISTICS. The value <range> specifies the valid range for this option.

Effect: Trafodion is unable to continue processing.

Recovery: Correct the syntax and resubmit.

9.6. SQL 9205

UPDATE STATISTICS is not supported for object <name>.

Cause: You attempted to run UPDATE STATISTICS against an object that is not supported.

Effect: Trafodion is unable to continue processing.

Recovery: Correct the syntax and resubmit.

9.7. SQL 9206

You are not authorized to read/write object <name>. Verify that you have the necessary access privileges.

Cause: Trafodion could not perform an UPDATE STATISTICS statement because you are not authorized to perform this operation against this table. You must either own the object <name> or be the super ID.

Effect: Trafodion is unable to continue processing.

Recovery: Resubmit after checking the table location and access privileges.

9.8. SQL 9207

The specified SAMPLE option generated an empty sample set. Modify the SAMPLE option and resubmit.

Cause: The SAMPLE option you specified generated an empty sample set.

Effect: Trafodion is unable to continue processing.

Recovery: Modify the SAMPLE option and resubmit.

9.9. SQL 9208

Column definitions could not be accessed.

Cause: An UPDATE STATISTICS statement was unable to access column definitions.

Effect: The operation fails.

Recovery: Resubmit the statement. If this does not correct the problem, stop and restart the Trafodion database software. If this does not correct the problem, report the entire message to user@trafodion.incubator.apache.org.

9.10. SQL 9209

Column <name> does not exist in object <name>.

Cause: You tried to access column <name>, which does not exist in object <name>.

Effect: The operation fails.

Recovery: Check the column <name> and resubmit.

9.11. SQL 9210

One of the column data types is not supported by UPDATE STATISTICS. You must exclude this column from the column list in UPDATE STATISTICS.

Cause: You attempted to perform UPDATE STATISTICS on a column whose data type does not support this operation.

Effect: The operation fails.

Recovery: Exclude this column from the column list and resubmit.

9.12. SQL 9212

Cardinality statistics will be more accurate if you use the SET ROWCOUNT option in the SAMPLE clause.

Cause: The SET ROWCOUNT option was not used in the SAMPLE clause.

Effect: Processing continues without interruption.

Recovery: Provide SET ROWCOUNT option and resubmit for more accurate statistics.

9.13. SQL 9213

If you intend to update histogram statistics for columns, you must specify a column list in the statement.

Cause: You attempted to perform UPDATE STATISTICS and did not specify a column list.

Effect: Processing continues without interruption.

Recovery: Correct your syntax to specify the column list and resubmit.

9.14. SQL 9214

Object <name> could not be created.

Cause: UPDATE STATISTICS encountered an error during a CREATE of the object <name>.

Effect: Trafodion is unable to continue processing.

Recovery: Resubmit the statement. If this does not correct the problem, stop and restart the Trafodion database software. If this does not correct the problem, report the entire message to user@trafodion.incubator.apache.org.

9.15. SQL 10007

Sort failed while writing to a scratch file with error <system-error>.

Cause: An I/O error occurred during a scratch file I/O operation.

Effect: The operation fails.

9.16. SQL 10011

Sort failed while reading a scratch file with error <system-error>.

Where <system-error> is the error returned.

Cause: An I/O error occurred during a scratch file I/O operation.

Effect: The operation fails.

9.17. SQL 10013

Sort could not find any appropriate disks for overflow.

Cause: The available disks on the system are not suitable for scratch usage.

Effect: The operation fails.

Recovery: Make sure there are appropriate disks with enough space for scratch file use. Disks such as optical disks, phantom disks, and virtual disks are not considered suitable. See the Trafodion SQL Reference Manual for more information on how to influence the placement of scratch files.

9.18. SQL 10014

Sort ran out of memory while allocating an internal data structure.

Cause: An internal data structure could not be allocated because of an out of memory condition.

Effect: The operation fails.

Recovery: None. This is an internal error. Contact user@trafodion.incubator.apache.org.

9.19. SQL 10015

Sort failed while calling PROCESSHANDLE_GETMINE_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.20. SQL 10016

Sort failed while calling PROCESSHANDLE_DECOMPOSE_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.21. SQL 10017

Sort failed while calling DEVICE_GETINFOBYLDEV_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.22. SQL 10018

Sort failed while calling FILENAME_FILESTART_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.23. SQL 10019

Sort failed while calling FILENAME_FILENEXT_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.24. SQL 10020

Sort failed while calling FILENAME_FINDFINISH_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.25. SQL 10021

Sort failed while calling FILE_GETINFOLISTBYNAME_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.26. SQL 10022

Sort failed while calling FILE_CREATE with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.27. SQL 10023

Sort failed while calling FILE_OPEN_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

9.28. SQL 10024

Sort failed while calling SETMODE_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

Recovery: Contact the user@trafodion.incubator.apache.org.

9.29. SQL 10027

Sort failed while calling FILE_GETINFOLIST with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

Recovery: Contact the user@trafodion.incubator.apache.org.

9.30. SQL 10028

Sort failed while calling POSITION with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

Recovery: Contact the user@trafodion.incubator.apache.org.

9.31. SQL 10029

Sort failed while calling FILE_GETINFO_ with error <number>.

Cause: An error occurred while calling a system level call.

Effect: The operation fails.

Recovery: Contact the user@trafodion.incubator.apache.org.

9.32. SQL 10047

Sort Error: Wrong length read.

Cause: The length of the data returned was not what was expected.

Effect: The operation fails.

Recovery: None. This is an internal error. Contact user@trafodion.incubator.apache.org.

9.33. SQL 10048

IO to a scratch file failed because the free space threshold was reached on all available disks.

Cause: The threshold, specified by the default SCRATCH_FREESPACE_THRESHOLD_PERCENT was reached on all available disks.

Effect: The operation fails.

Recovery: Reduce the threshold percentage and retry the query or specify a particular disk with adequate free space specifically for scratch use.

10. UDR Server and Language Manager Messages (11000 through 11399)

10.1. SQL 11108

MXUDR: Unable to allocate memory for object <object-name>.

Where <object-name> is the name of the object.

Cause: The Trafodion UDR server was not able to obtain enough memory to allocate the named object.

Effect: The request message is rejected, and the Trafodion statement fails.

Recovery: Stop and start the client process to restart a new Trafodion UDR server, and retry the stored procedure call.

10.2. SQL 11201

Language Manager initialization failed. Details: Error occurred while loading Java class <class-name>.

Where <class-name> is the name of the Java class.

Cause: Initialization of the language manager failed because a required Java class could not be loaded or because a required Java method was not found.

Effect: The operation fails.

Recovery: Check the installation of the Trafodion platform for Java product and the Trafodion language manager. Verify the existence of the specified class. Stop and restart the session, and retry the Trafodion statement.

10.3. SQL 11202

Language Manager initialization failed. Details: Unable to initialize the Java virtual machine.

Cause: Initialization of the language manager failed during creation of the Java Virtual Machine.

Effect: The operation fails.

Recovery: Check the installation of the Trafodion platform for Java product. Stop and restart the session, and retry the Trafodion statement.

10.4. SQL 11221

Language Manager is out of memory <string>.

Cause: The language manager could not acquire enough memory to complete its work on the Trafodion statement.

Effect: The operation fails.

Recovery: Stop and restart the session and retry the Trafodion statement.

10.5. SQL 11222

The operation failed because the Java Virtual Machine ran out of memory.

Cause: The Java Virtual Machine, hosted by a Trafodion UDR server, did not have enough memory to execute a Java method. This error condition will be accompanied by another condition that shows when the Java Virtual Machine encountered the error.

Effect: The operation fails.

Recovery: Stop and restart the session and retry the Trafodion statement.

11. SQLSTATE

Trafodion returns SQLSTATE values that are defined in the ISO/ANSI SQL standard and implementation-defined SQLSTATE values. See Subclause 22, "Status Codes" in the ISO/ANSI SQL92 Standard "Database Language SQL."

11.1. SQLSTATE and SQLCODE Considerations

  • Using SQLSTATE causes performance overhead because of the representation of SQLSTATE as five characters. The overhead is most noticeable with short SQL statements and in error situations.

  • Mapping SQLSTATE values to SQLCODE values can result in ambiguous SQLCODE values:

    • SQLCODE values will often not map to a unique SQLSTATE value. For example, see the many SQLCODE values mapped to SQLSTATE 42000 in the table below.

    • To deal with the problem of ambiguous SQLCODE values, we recommends retrieving the error message text or the SQLCODE value in addition to the SQLSTATE.

  • SQLSTATE values for some Trafodion error and warning messages might be subject to change:

    • In the future, Trafodion might return different SQLSTATE values for error conditions than it does now.

    • In the future, the Trafodion error handling might use a different error path, and therefore return a slightly different SQLCODE and implementation defined SQLSTATE value for an error.

11.2. SQLSTATE Values

The table below is a list of returned SQLSTATE values ordered by SQLSTATE. SQLSTATE values are provided for both warning messages (positive SQLCODE numbers) and error messages (negative SQLCODE numbers).

SQLSTATE SQLCODE Error Text
00000
0

Successful completion

01001
8106

The last row fetched by this cursor was updated or deleted between the FETCH and UPDATE/DELETE. . .WHERE CURRENT. . . of statements.

01004
8402

A string overflow occurred during the evaluation of a character expression.

01006
1015

Some of the specified privileges could not be revoked.

01007
1012

No privileges were granted. You lack grant option on the specified privileges.

01007
1013

Not all privileges were granted. You lack grant option on some of the specified privileges.

01500
1000

A syntax error occurred.

01501
1001

An internal error occurred in module <name> on line <num>. DETAILS(<details>).

01502
1002

Catalog <catalog> does not exist, or has not been registered on node <node>

01503
1003

Schema <schema> does not exist.

01504
1004

Table, view, or stored procedure <object-name> does not exist or object type is invalid for the current operation.

01505
1005

Constraint <constraint-name> does not exist.

01506
1006

Index <index-name> does not exist.

01508
1008

User name <user-name> does not exist.

01509
1009

Column <column-name> does not exist in the specified table.

0150A
1010

The statement just specified is currently not supported.

0150E
1014

Privileges were not revoked. Dependent privilege descriptors still exist.

0150G
1016

Redundant references to column <column-name> were specified in the constraint or trigger definition.

0150H
1017

You are not authorized to perform this operation.

0150J
1019

No valid primary partition for <table-name> could be found.

0150K
1020

Privilege settings on metadata tables cannot be changed.

0150L
1021

SQL is already initialized on system <node-name>.

0150M
1022

Schema <schema-name> already exists.

0150N
1023

Only the super ID can name an authorization ID other than the current user name.

0150O
1024

File system error <error-number> occurred on module <text-string-1>. <text-string-2>.

0150P
1025

Request failed. One or more dependent objects exist.

0150Q
1026

Only the schema owner or super ID user can drop a schema.

0150R
1027

The definition <schema-name> is dropped when its catalog is dropped.

0150S
1028

The schema must be empty. It contains at least one object <object-name>.

0150T
1029

Object <object-name> could not be created.

0150U
1030

File label <name> could not be accessed. File System error <error>.

0150V
1031

Object <object-name> could not be dropped.

0150Y
1034

Trafodion was not able to initialize.

0150Z
1035

Catalog <catalog-name> already exists

01510
1036

Only super ID can execute DROP SQL.

01511
1037

Trafodion is not installed on system <node>.

01512
1038

Not all catalogs have been dropped from the system.

01513
1039

The drop SQL statement could not be executed.

01514
1040

The use of ALTER on metadata tables is not permitted.

01515
1041

The primary key has already been defined.

01516
1042

All PRIMARY KEY or UNIQUE constraint columns must be NOT NULL.

01517
1043

Constraint <constraint-name> already exists.

01518
1044

Constraint <constraint-name> could not be created because the referenced columns in the referenced table are not part of a unique constraint.

01519
1045

The unique constraint cannot be used because it is deferrable.

0151A
1046

Referenced and referencing column lists do not match for constraint <name>.

0151B
1047

Request failed. Dependent view <view-name> exists.

0151C
1048

Currently only supporting restrict drop behavior.

0151D
1049

Attempting to drop a NOT DROPPABLE constraint.

0151E
1050

Cannot drop constraint used as a referenced object for a foreign key.

0151F
1051

Insufficient privilege on <table-name>.

0151G
1052

Trying to drop a constraint that does not belong to requested table.

0151H
1053

Unique index <table-name> could not be created because the column(s) specified contain duplicate data.

0151I
1054

Index <table-name> already exists.

0151J
1055

Table, view, or stored procedure <table-name> already exists.

0151L
1057

The DAM volume specified (<name>) is not available or is not audit protected.

0151M
1058

Lock <table-name> already exists.

0151N
1059

Request failed. Dependent constraint <name> exists.

0151P
1061

Cannot drop metadata catalog <name>.

0151Q
1062

Cannot drop metadata schema <name>.

0151R
1063

Cannot drop metadata index <table-name>.

0151S
1064

Cannot drop metadata view <table-name>.

0151T
1065

Cannot create constraint <name> in metadata schema.

0151U
1066

Cannot create index <table-name> in metadata schema.

0151X
1069

Unable to drop schema <name>.

0151Y
1070

Unable to create object <table-name> (file error <num>).

0151Z
1071

Unable to access object <table-name> (file error <num>).

01520
1072

Unique constraint <name> is disabled; cannot create foreign key constraint <name>.

01521
1073

Only the super ID user can execute INITIALIZE SQL.

01523
1075

Catalog <name> contains at least one schema. The catalog must be empty.

01525
1077

Metadata table <name> does not contain information for view <name>.

01526
1078

The format of the specified location name <name> is invalid.

01527
1079

Unable to prepare the statement.

01528
1080

Duplicate references to column <name> in the create request.

01529
1081

Loading of index <table-name> failed unexpectedly.

0152A
1082

Validation for constraint <name> failed unexpectedly.

0152B
1083

Validation for constraint <name> failed; incompatible data exists in table.

0152C
1084

Invalid default value for column <name>.

0152D
1085

The calculated key length is greater than 255 bytes.

0152E
1086

Lock <table-name> does not exist.

0152F
1087

Lock cannot be granted, conflicting operation is in progress.

0152G
1088

Cannot instantiate object <table-name>, conflicting lock exists.

0152I
1090

Self-referencing constraints are currently not supported.

0152M
1094

Unable to drop object <table-name> because it is not a <name>.

0152N
1095

The partition by column <name> should also be part of the clustering/storage key.

0152Q
1098

Duplicate partition key (<name>) specified for object <name>.

0152R
1099

Column <num> is unnamed. You must specify an AS clause for that column expression, or name all the columns by specifying a view column list.

0152S
1100

Unable to select <table.schema.name>

0152T
1101

Unable to update <table.schema.name>

0152U
1102

Unable to insert rows into <table.schema.name>

0152V
1103

Unable to delete rows from <table.schema.name>

0152W
1104

Default value string too long for column <name>.

0152X
1105

CREATE TABLE LIKE statement cannot contain both HORIZONTAL PARTITIONS and STORE BY clauses.

0152Y
1106

The specified partition <name> of object <name> does not exist.

01530
1108

The number of columns specified in the view column list, <num>, does not match the degree of the query expression, <num>.

01531
1109

The WITH CHECK OPTION clause appears in the definition of view <table-name>, but the view is not updateable.

01533
1111

Error starting transaction. Table name <name>

01536
1114

Unable to create catalog <name> metadata tables on <name>.

01537
1115

Unable to create label for <name> (file error <num>) <text>.

01538
1116

The current partitioning scheme requires a user-specified primary key on object <name>.

01539
1117

Cannot drop the only partition of the table. There must be at least two partitions available to perform the drop.

0153A
1118

Cannot create object <name> in metadata schema.

0153B
1119

Cannot drop metadata object <name>.

0153C
1120

Attempting to change the audit flags for a table in an unsupported way.

0153D
1121

Attempting to perform a partition add, move, or drop on table <name>. Partition operations are not allowed on tables with vertical partitions, entry sequenced operations, and SYSKEY only partitioned tables.

0153E
1122

The number of specified partition key values (<name>) for object <name> exceeds the number of key columns used, <num>.

0153F
1123

Unable to process the partition key values (<name>) for object <name>. Please verify that the correct key value data types were specified.

0153G
1124

Schema <name> is an unknown version.

0153H
1125

API request version number mismatch.

0153I
1126

Referential integrity is not yet supported. Constraint <name> will not be enforced.

0153J
1127

The specified table <name> is not a base table. Please verify that the correct table was specified.

0153K
1128

Invalid API request. Details: <text>.

0153M
1130

The column requires a default value.

0153O
1132

An added column cannot have both DEFAULT NULL and NOT NULL.

0153P
1133

Only the super ID can perform this operation.

0153Q
1134

Concurrent DDL operations are being performed on the given object. The current operation cannot be performed.

0153R
1135

Clustering key column <name> must be assigned a NOT NULL NOT DROPPABLE constraint.

0153S
1136

For an added column, the PRIMARY KEY clause cannot be NOT DROPPABLE.

0153T
1137

Invalid index status. Details: <text>.

0153U
1138

Invalid input parameter(s). Object name and status are required.

0153V
1139

System-generated column <name> of base table <name> cannot appear in the search condition of a check constraint definition.

0153W
1140

Row-length <num> exceeds the maximum allowed row-length of <num> for table <name>.

0153X
1141

Could not obtain an up-and-audited DAM volume. Please check your system configuration.

0153Y
1142

Attempting to add a column with a NULL, UNIQUE, CHECK, PRIMARY KEY, or FOREIGN KEY constraint defined. This is not supported for a non-audited table.

0153Z
1143

Validation for constraint <name> failed; incompatible data exists in referencing base table <name> and referenced base table <name>. To display the data violating the constraint, please use the following DML statement: <text>

01540
1144

Expected a quoted string in first key clause for column <name> on table <name>, value detected is (<num>).

01541
1145

The catalog name <name> is reserved for the Trafodion metadata.

01542
1146

Unable to alter object <name> because it is not a <name>.

01543
1147

System-generated column <name> of base table <name> cannot appear in a unique or primary key constraint definition.

01544
1148

System-generated column <name> of base table <name> cannot appear in a referential integrity constraint definition.

01551
1181

Unable to drop object <name> (file error <num>).

01552
1182

Cannot instantiate constraint <name>, conflicting lock exists.

01553
1183

Cannot instantiate module <name>, conflicting lock exists.

01554
1184

Insufficient privilege on <name>.

01555
1185

The location name is either invalid or missing.

01556
1186

Column <name> is of type <type>, incompatible with the default value’s type, <type>.

01557
1187

The schema name <name> is reserved for the Trafodion metadata.

01558
1188

Unable to create referential integrity constraint <name> for table <name> due to circular dependency: <name>.

01566
1222

Invalid file type <name>.

01568
1224

Invalid data type for routine param <name>.

01569
1225

Error on access to PROCS table. Trafodion error <integer>.

0156A
1226

Error on access to PARAMS table. Trafodion error <integer>.

0156F
1231

Unable to create user-defined routine <string>.

01600
2000

Error messages for compiler main, IPC, and DEFAULTS table; assertions for optimizer.

01601
2001

Error or warning <num> occurred while opening or reading from DEFAULTS table <name>. Using <name> values.

01602
2002

Internal error: cannot create Trafodion compiler server.

01603
2003

Internal error: cannot establish connection with MXCMP server.

01604
2004

Internal error: error from MXCMP; cannot work on this query.

01605
2005

Internal error: from compilation, no errors in diagnostics yet for statement: <name>

01606
2006

Internal error: assertion failure (<name>) in file <name> at line <num>.

01608
2008

Internal error: out of virtual memory.

01609
2009

The user transaction must be rolled back (or committed, if that makes sense in the application) before MXCMP can be restarted and proceed.

0160A
2010

Internal IPC error.

0160B
2011

Unable to create server process. error <num> while resolving program file name <name>.

0160C
2012

Unable to create server process <name>. error <num>, TPC error = <num>, error detail = <num>. (See procedure PROCESS_LAUNCH_ for details).

0160D
2013

Unable to create server process <name>. error <num> on program file.

0160E
2014

Unable to create server process <name>. error <num> on swap file.

0160F
2015

Unable to create server process <name>. CPU is unavailable ( error <num>).

0160G
2016

Server process <name> was started but had undefined externals.

0160H
2017

Unable to create server process <name>. No more processes (PCBs) available.

0160I
2018

Unable to create server process <name>. Library conflict.

0160J
2019

Unable to create server process <name>. Unable to allocate virtual memory.

0160K
2020

Unable to create server process <name>. Unlicensed privileged program.

0160L
2021

System error <num> in <name> from <name>.

0160M
2022

System error <num> in <name> from <name>, detail <num>.

0160N
2023

Unable to create server process <name>. <name>.

0160P
2025

Unable to create server process <name>. CPU is unavailable; <text>.

0160R
2027

Error <num> while sending a startup message to process <name>.

0160S
2028

Unable to create OSS server process <name>. Insufficient resources.

0160T
2029

Unable to create OSS server process <name>. OSS is not running.

0160X
2033

<text>: error <num> while communicating with process <name>.

0160Y
2034

<text>: error <num> while communicating with server process <name>.

0160Z
2035

<text>: Unable to open process <name> (err no = <num>).

01611
2037

<receiving-process>: A message from process <sending-process> was incorrectly formatted and could not be processed.

0161E
2050

<name> is not the name of any DEFAULTS table attribute.

0161F
2051

Invalid <name> option <name> or value '<num>'.

0161G
2052

Optimizer internal counters: <name> <name> <name> <name>.

0161H
2053

ASSERTION FAILURE CAUGHT BY OPTIMIZER! Attempting to recover and produce a plan.

0161J
2055

Invalid value '<num>' for DEFAULTS attribute <name>.

0161K
2056

The value must be a number in the range <num>.

0161L
2057

The value must be a multiple of <num>.

0161M
2058

DEFAULTS attribute <name> is of type <type> but is being converted to <type>.

0161N
2059

Warnings while reading values from DEFAULTS table <name>.

0161O
2060

Procedure <name> has already been defined in this module. The previous definition is being retained and this latest one ignored.

0161P
2061

Static cursor <name> has already been defined in this module. The previous definition, as a static cursor, is being retained and this latest one ignored.

0161Q
2062

Static cursor <name> has already been defined in this module. The previous definition, as a dynamic cursor, is being retained and this latest one ignored.

0161R
2063

Dynamic cursor <name> has already been defined in this module. The previous definition, as a static cursor, is being retained and this latest one ignored.

0161S
2064

Dynamic cursor <name> has already been defined in this module. The previous definition, as a dynamic cursor, is being retained and this latest one ignored.

0161T
2065

Statement <name> was not found in module <name>.

0161U
2066

Cursor <name> was not found in module <name>.

0161V
2067

Descriptor <name> has already been defined in this module. The previous definition is being retained and this latest one ignored.

0161W
2068

A procedure body must be a SELECT, INSERT, UPDATE, DELETE, DECLARE CATALOG, DECLARE SCHEMA, or a static DECLARE CURSOR.

0161X
2069

A static cursor declaration might appear only in the body of a procedure.

0161Y
2070

Invalid statement type in this context.

0161Z
2071

The name <name> has already been declared or defined in this module. The previous definition, as a <name>, is being retained and this latest one ignored.

01620
2072

A simple value specification that is a literal is not yet supported.

01621
2073

Only the super ID user can compile system module <name>.

01622
2074

The name <name> is reserved for future system modules.

01628
2080

Error <num> while reading file: <num> bytes were read from <name> when <num> were expected in module <name>.

01629
2081

Error <num> while opening file <name> for read.

0162A
2082

Error <num> while opening file <name> for write.

0162B
2083

Error <num> while naming or locating file <name>.

0162C
2084

Error <num> while writing <num> bytes to file <name>.

0162D
2085

Error <num> while closing file <name>.

0162E
2086

Unable to purge the file <name>. This file contains the results of a failed compilation and should be purged.

0162I
2090

The command line argument for module name, <name>, is being ignored in favor of module name <name> in file <name>.

0162J
2091

The required module statement was not found in file <name>.

0162K
2092

A module statement has already appeared in this file. The previous definition, <name>, is being retained and this latest one ignored.

0162L
2093

A module timestamp statement was not found in file <name>.

0162M
2094

A module timestamp statement has already appeared in this module. The previous timestamp is being retained and this latest one ignored.

0162N
2095

Module file <name>, expected to contain module <name>, instead contains <name>.

0162Q
2098

The <name> compilation completed with <num> warnings.

0162R
2099

The <name> compilation failed with <num> errors and <num> warnings.

0162S
2100

Break was received. The compilation has been aborted.

0162T
2101

Compilation failure due to internal error.

0162U
2102

Unable to compile this query with 'MINIMUM' optimization level. Suggestion: Retry with 'MEDIUM' optimization level.

0162V
2103

Unable to compile this query for one/both of the following reasons: a) Use of 'MINIMUM' optimization level, or b) Incompatible Control Query Shape specifications.

0162W
2104

Unable to compile this query for one of two reasons: a) Incompatible Control Query Shape (CQS) specifications, or b) 'MEDIUM' optimization level is not sufficient to satisfy the CQS in effect.

Suggestion: a) Inspect the CQS in effect; or b) Raise the optimization level to 'MAXIMUM'. Note that for this query, 'MAXIMUM' optimization level might result in a long compile time.

0162X
2105

Unable to compile this query because of incompatible Control Query Shape (CQS) specifications. Suggestion: Inspect the CQS in effect.

0162Y
2106

Unable to compile this statement since it is too long. Suggestion: Break up large statements into smaller pieces.

0162Z
2107

Unable to compile this statement. Suggestion: Address the issue(s) raised in the reported warning(s).

01630
2108

Statement was compiled as if query plan caching were off.

0165K
2200

DEFAULTS attribute <name> is read-only.

016P0
2900

in file <name> at line <num>:

01700
3000

An internal error occurred in module <name> on line <number>. DETAILS (<detailed-text>).

01701
3001

Syntax error at or before <SQL-text>.

01702
3002

<name> is not a valid column reference; it has more than 4 name parts.

01703
3003

Length or precision must be greater than zero.

01704
3004

A delimited identifier must contain at least one non-blank character.

01705
3005

A DECLARE CURSOR statement cannot dynamically get its cursor name from a host variable while also statically declaring a cursor specification. A dynamic cursor requires the name of a previously prepared statement, or a host variable containing such a name; a static cursor requires a fixed, static name.

01706
3006

In a dynamic cursor declaration both the cursor and the statement must be named in the same way: both must be literals or both must be string host variable expressions.

01707
3007

In an ALLOCATE CURSOR statement both the cursor and the statement must be named using string host variables.

01708
3008

Precision of <type> UNSIGNED data type, <value>, cannot exceed 9.

01709
3009

DROP ASSERTION statement is not yet supported.

0170A
3010

Character set <name> is not yet supported.

0170B
3011

<name> is not a valid qualified name; it has more than 3 name parts.

0170C
3012

COUNT is the only aggregate function that accepts (\*) as an operand.

0170D
3013

Subtraction is the only operation allowed in the parenthesized expression preceding an interval qualifier.

0170E
3014

Precision of numeric, <value>, cannot exceed 18.

0170F
3015

Scale <value> cannot exceed precision <value>.

0170G
3016

Precision of decimal, <value>, cannot exceed 18.

0170H
3017

Expected an unsigned integer, not <value>.

0170I
3018

Expected an unsigned smallint, not <value>.

0170J
3019

Expected an unsigned number within the parentheses, not <value>.

0170K
3020

Expected an unsigned number as the first operand within the parentheses, not <value>.

0170L
3021

Expected an unsigned number as the second operand within the parentheses, not <value>.

0170M
3022

The <name> operator is not yet supported.

0170N
3023

The COLLATE clause in a sort specification is not yet supported.

0170O
3024

The MATCH PARTIAL clause is not yet supported.

0170P
3025

The format of the subvolume name part in the specified location name <name> is invalid. The subvolume name part must be eight characters long and begin with the letters ZSD.

0170Q
3026

A comma must be used to separate file attributes.

0170R
3027

<name> is not a valid simple name; it has more than one name part.

0170S
3028

Specifying a privilege column list in the INSERT clause is not yet supported.

0170T
3029

<name> is not yet supported in referential integrity constraint definition.

0170U
3030

The PARALLEL EXECUTION clause is not yet supported.

0170V
3031

CASCADE drop behavior is not yet supported.

0170W
3032

The COLUMN clause in the ALTER TABLE statement is not yet supported.

0170X
3033

The MOVE clause in the ALTER TABLE statement is not yet supported.

0170Y
3034

The PARTITION clause in the ALTER TABLE statement is not yet supported.

0170Z
3035

The RENAME clause in the ALTER TABLE statement is not yet supported.

01710
3036

The SET CONSTRAINT clause in the ALTER TABLE statement is not yet supported.

01711
3037

Precision of type <data-type> cannot exceed 18.

01712
3038

PIC X types cannot have leading signs, or any signs at all.

01713
3039

PIC X types do not have any COMP representation.

01714
3040

Precision zero is invalid. Add a '9' to the PICTURE clause.

01715
3041

UNSIGNED is invalid for a numeric or decimal type with a scale greater than 9.

01716
3042

UPSHIFT for a numeric type is invalid.

01717
3043

Precision greater than 18 for a COMP numeric type is invalid.

01718
3044

Invalid interval <value>.

01719
3045

Invalid date <value>.

0171A
3046

Invalid time <value>.

0171B
3047

Invalid timestamp <timestamp.

0171C
3048

Dynamic parameters, such as <name>, are not allowed in a static compilation.

0171D
3049

Host variables, such as <name>, are not allowed in a dynamic compilation.

0171E
3050

The constraint must have the same catalog and schema as the specified table.

0171F
3051

Duplicate HEADING clauses in column definition <name>.

0171G
3052

Duplicate NOT NULL clauses in column definition <name>.

0171H
3053

Duplicate PRIMARY KEY clauses in column definition <name>.

0171I
3054

The NOT DROPPABLE clause is allowed only in PRIMARY KEY and NOT NULL constraint definitions.

0171J
3055

Duplicate DELETE rules specified.

0171K
3056

Duplicate UPDATE rules specified.

0171L
3057

Invalid size value in the ALLOCATE clause.

0171M
3058

The BLOCKSIZE value must be 4096.

0171N
3059

Invalid size value in the MAXSIZE clause.

0171O
3060

Invalid percentage value in the DSLACK clause.

0171P
3061

The format of the specified location name <name> is invalid.

0171Q
3062

Duplicate MAXSIZE clauses in the PARTITION clause.

0171R
3063

Duplicate DSLACK clauses in the PARTITION clause.

0171S
3064

Duplicate ISLACK clauses in the PARTITION clause.

0171T
3065

The primary key constraint cannot be droppable when the STORE BY PRIMARY KEY clause appears in a table definition.

0171V
3067

ALTER TABLE ADD CONSTRAINT allows only DROPPABLE constraints.

0171W
3068

The ALLOCATE and DEALLOCATE clauses cannot coexist in the same ALTER INDEX statement.

0171Y
3070

The [NO]AUDIT clause is not supported.

0171Z
3071

Duplicate [NO]AUDITCOMPRESS clauses.

01720
3072

The BLOCKSIZE clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

01721
3073

Duplicate [NO]BUFFERED clauses.

01722
3074

Duplicate [NO]CLEARONPURGE clauses.

01723
3075

The [NO]COMPRESS clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

01724
3076

Duplicate DEALLOCATE clauses.

01725
3077

The [NO]ICOMPRESS clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

01726
3078

The LOCKLENGTH clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

01727
3079

Duplicate MAXSIZE clauses.

01728
3080

The [NO]SERIALWRITES clause is not supported.

01729
3081

Duplicate ALLOCATE clauses.

0172A
3082

Duplicate [NO]AUDIT clauses.

0172B
3083

Duplicate [NO]AUDITCOMPRESS clauses.

0172C
3084

The BLOCKSIZE clause is not allowed in the ALTER TABLE . . . ATTRIBUTE(S) statement.

0172D
3085

Duplicate [NO]BUFFERED clauses.

0172E
3086

Duplicate [NO]CLEARONPURGE clauses.

0172F
3087

The [NO]COMPRESS clause is not allowed in the ALTER TABLE . . . ATTRIBUTE(S) statement.

0172G
3088

The ALLOCATE AND DEALLOCATE cannot coexist in the same ALTER TABLE statement.

0172H
3089

The [NO]ICOMPRESS clause is not allowed in the ALTER TABLE . . . ATTRIBUTE(S) statement.

0172I
3090

Duplicate LOCKLENGTH clauses.

0172J
3091

The [NO]AUDIT clause is not allowed in the CREATE INDEX statements.

0172K
3092

Duplicate BLOCKSIZE clauses.

0172L
3093

Duplicate DCOMPRESS clauses.

0172M
3094

The DEALLOCATE clause is not allowed in the CREATE INDEX statements.

0172N
3095

Duplicate [NO]ICOMPRESS clauses.

0172O
3096

Duplicate [NO]SERIALWRITES clauses.

0172P
3097

The DEALLOCATE clause is not allowed in the CREATE TABLE statements.

0172Q
3098

Duplicate LOCATION clauses.

0172R
3099

Duplicate FILE ATTRIBUTE(S) clauses.

0172S
3100

Duplicate DSLACK clauses.

0172T
3101

Duplicate ISLACK clauses.

0172U
3102

Duplicate PARALLEL EXECUTION clauses.

0172V
3103

Duplicate PARTITION clauses.

0172W
3104

Only the ADD option is allowed in a PARTITION clause in a CREATE TABLE statement.

0172X
3105

Currently only range, hash and system partitioning are supported.

0172Y
3106

Duplicate PRIMARY KEY clauses.

0172Z
3107

Duplicate LIKE clauses.

01730
3108

The LIKE clause and STORE BY clause cannot coexist in the same statement.

01731
3109

Duplicate STORE BY clauses.

01732
3110

The LIKE clause and ATTRIBUTE(S) clause cannot coexist in the same statement.

01733
3111

The LIKE clause and LOCATION clause cannot coexist in the same statement.

01734
3112

The LIKE clause and PARTITION clause cannot coexist in the same statement.

01735
3113

Error in CONTROL statement: <error>

01736
3114

Transaction access mode READ WRITE is incompatible with isolation level READ UNCOMMITTED.

01737
3115

Duplicate ISOLATION LEVEL clause specified.

01738
3116

Duplicate transaction access mode clause specified.

01739
3117

Duplicate DIAGNOSTICS SIZE specified.

0173A
3118

Identifier too long.

0173B
3119

The WITH LOCAL CHECK OPTION clause is not supported.

0173C
3120

The CREATE ASSERTION statement is not yet supported.

0173D
3121

Partitioned entry-sequenced tables are not yet supported.

0173E
3122

The format of the system name part in the specified location name <name> is invalid.

0173F
3123

The format of the file name part in the specified location name <name> is invalid. The file name part must be eight characters long and end with the digits 00.

0173J
3127

Invalid character in identifier <name>.

0173K
3128

<object-name> is a reserved word. It must be delimited by double-quotes to be used as an identifier.

0173L
3129

Function <name> accepts exactly one operand.

0173M
3130

UNSIGNED option is not supported for LARGEINT type.

0173N
3131

The statement just specified is currently not supported.

0173O
3132

The HEADING for column <name> exceeds the maximum size of 128 characters.

0173P
3133

PERFORM is valid only in COBOL programs.

0173Q
3134

Precision of time or timeStamp, <value>, cannot exceed 6.

0173R
3135

Precision of float, <value>, cannot exceed 54.

0173S
3136

Only LEFT, RIGHT, and FULL OUTER JOIN are valid in {oj . . .}

0173T
3137

UNION JOIN is not yet supported.

0173U
3138

A key-sequenced table with range partitioning requires a FIRST KEY clause.

0173V
3139

A range-partitioned index requires a FIRST KEY clause.

0173W
3140

The isolation level cannot be READ UNCOMMITTED for an INSERT, UPDATE, DELETE, or DDL statement.

0173X
3141

The transaction access mode cannot be READ ONLY for an INSERT, UPDATE, DELETE, or DDL statement.

0173Y
3142

INTO clause host variables are not allowed in a static cursor.

0173Z
3143

BROWSE or READ UNCOMMITTED access is not allowed on a table value constructor.

01741
3145

Positioned UPDATE or DELETE is allowed only in embedded SQL.

01743
3147

In an IN predicate whose right operand is a value list, the left operand must be scalar (degree of one).

01744
3148

Environment variable <name> is being ignored because this version of the code is Release, not Debug. Actual query results will likely not match expected results.

01745
3149

Duplicate WITH CONSTRAINTS phrases in LIKE clause in CREATE TABLE statement.

01746
3150

Duplicate WITH HEADING phrases in LIKE clause in CREATE TABLE statement.

01747
3151

Duplicate WITH HORIZONTAL PARTITIONS phrases in LIKE clause in CREATE TABLE statement.

01749
3153

The FIRST KEY clause is not allowed with hash partitioning.

0174B
3155

The POPULATE and NO POPULATE clauses cannot coexist in the same CREATE INDEX statement.

0174D
3157

Catalog name is required.

0174E
3158

Invalid DATETIME <name>.

0174F
3159

If you intended <name> to be a character set specifier for a character string literal, you must remove the spaces in front of the single quote delimiter.

0174G
3160

<name> was declared more than once in the procedure parameter list.

0174H
3161

<name> was not declared in the procedure parameter list.

0174I
3162

Procedure parameter <name> was not used.

0174J
3163

Host variable <name> appears more than once in the INTO list. Execution results will be undefined.

0174K
3164

Data type mismatch between output host variable and selected value.

0174L
3165

Min or max precision or exponent value exceeded, <num>.

0174M
3166

Min or max value for float or double value exceeded, <num>.

0174N
3167

Duplicate [ NOT ] DROPPABLE clauses.

0174O
3168

The FOR . . . ACCESS clause is not allowed in a CREATE VIEW statement.

0174P
3169

<name> is not a known collation.

0174R
3171

Transaction statements are not allowed in compound statements.

0174S
3172

EXIT is not allowed in a compound statement.

0174T
3173

UPDATE STATISTICS is not allowed in a compound statement.

0174U
3174

DDL statements are not allowed in compound statements.

0174V
3175

Dynamic SQL statements are not allowed in compound statements.

0174W
3176

Subqueries are not allowed in the IF Condition.

0174X
3177

Character set <name> requires an even number of characters in the length declaration of the data type.

0174Y
3178

One or more of the following external (host-language) data types incorrectly appears within the SQL query or operation: <name>.

0174Z
3179

Collation <name> is not defined on the character set <name>.

01750
3180

STREAM statements are not allowed in compound statements.

01751
3181

Invalid logical name, a three part logical name is required.

01752
3182

Extra semicolon(;) in a compound statement.

01757
3187

Not supported: SET STREAM TIMEOUT per a specific stream.

01759
3189

Cannot set lock timeout on a view.

0175L
3201

EXTERNAL PATH clause is required.

0175M
3202

PARAMETER STYLE clause is required.

0175N
3203

LANGUAGE clause is required.

0175O
3204

EXTERNAL NAME clause is badly formed.

0175P
3205

EXTERNAL NAME clause is required.

0175Q
3206

The name for an object of this type must be fully qualified, or set NAMETYPE ANSI.

0175R
3207

Value for DYNAMIC RESULT SETS must be zero.

0175S
3208

UNSIGNED numeric is not allowed for routine parameter.

01800
4000

Internal error in the query binder.

01801
4001

Column <name> is not found. Tables in scope: <name>. Default schema: <name>.

01802
4002

Column <name> is not found. Table <name> not exposed. Tables in scope: <name>. Default schema: <name>.

01803
4003

Column <name> is not a column in table <name>, or, after a NATURAL JOIN or JOIN USING, is no longer allowed to be specified with a table correlation name.

01804
4004

Column name <name> is ambiguous. Tables in scope: <name>. Default schema: <name>.

01805
4005

Column reference <name> must be a grouping column or be specified within an aggregate.

01806
4006

Within an aggregate, all column references must come from the same scope.

01807
4007

The select list index <num> is out of range. It must be between 1 and the number of select expressions, which in this case is <num>.

01808
4008

A subquery is not allowed inside an aggregate function.

01809
4009

An aggregate is not allowed inside an aggregate function.

0180A
4010

There are no columns with the correlation name <name>.

0180B
4011

Ambiguous star column reference <name>.

0180C
4012

Column reference <name> must be a grouping column or be specified within an aggregate. On this grouped table a star reference is not allowed.

0180D
4013

Column <name> is a system column and cannot be updated or inserted into.

0180E
4014

The operands of an INTERSECT must be of equal degree.

0180F
4015

Aggregate functions placed incorrectly: <name>.

0180G
4016

The number of derived columns (<num>) must equal the degree of the derived table (<num>).

0180H
4017

Derived column name <name> was specified more than once.

0180I
4018

Rows cannot be deleted from an entry-sequenced table.

0180J
4019

The select list of a subquery in a select list must be scalar (degree of one).

0180K
4020

Arithmetic operations on row value constructors are not allowed.

0180L
4021

The select list contains a nongrouping non-aggregated column, <name>.

0180M
4022

Target column <name> was specified more than once.

0180N
4023

The degree of each row value constructor (<num>) must equal the degree of the target table column list (<num>).

0180O
4024

Column <name> has no default value, so must be explicitly specified in the insert column list.

0180P
4025

Error while preparing constraint <name> on table <name>.

0180Q
4026

Reading from and inserting into, or updating in, or deleting from the same table, <name>, is not currently supported.

0180R
4027

Table <name> is not insertable.

0180S
4028

Table <name> is not updateable.

0180U
4030

Column <name> is an invalid combination of datetime fields (<num>, <num>, <num>).

0180V
4031

Column <name> is an unknown data type, <num>.

0180W
4032

Column <name> is an unknown class, <num>. It is neither a system column nor a user column.

0180X
4033

Column <name> is a primary or clustering key column and cannot be updated.

0180Y
4034

The operation (<name> <name> <name>) <name> is not allowed.

0180Z
4035

Type <name> cannot be cast to type <type>.

01810
4036

The source field of the EXTRACT function must be of DateTime or Interval type.

01811
4037

Field <name> cannot be extracted from a source of type <type>.

01812
4038

The operand of an AVG or SUM function must be numeric or interval.

01813
4039

Column <name> is of type <type>, incompatible with the value’s type, <type>.

01814
4040

The operands of a BETWEEN predicate must be of equal degree.

01815
4041

Type <name> cannot be compared with type <name>.

01816
4042

The operands of a comparison predicate must be of equal degree.

01817
4043

The operand of function <name> must be character.

01818
4044

Collation <name> does not support the <name> predicate or function.

01819
4045

The operand of function <name> must be numeric.

0181A
4046

The operands of function <name> must be exact numeric.

0181B
4047

The operands of function <name> must have a scale of 0.

0181C
4048

The third operand of a ternary comparison operator must be of type BOOLEAN, not <name>.

0181D
4049

A CASE expression cannot have a result data type of both <type> and <type>.

0181E
4050

The operands of the <name> predicate must be comparable character data types (that is, of the same character set and collation).

0181F
4051

The first operand of function <name> must be character.

0181G
4052

The second operand of function <name> must be numeric.

0181H
4053

The third operand of function <name> must be numeric.

0181J
4055

The select lists or tuples must have comparable data types. <type> and <type> are not comparable.

0181K
4056

Exposed name <name> appears more than once.

0181L
4057

Correlation name <name> conflicts with qualified identifier of table <name>.

0181N
4059

The first operand of function <name> must be numeric.

0181O
4060

Reading from and inserting into, or updating in, or deleting from the same table, <name>, is not currently supported. <name> is contained by view(s) <name>.

0181P
4061

Rows cannot be inserted into, or updated in, an individual table partition.

0181Q
4062

The preceding error actually occurred in function <name>.

0181R
4063

The operands of function <name> must be comparable character data types (that is, of the same character set and collation).

0181S
4064

The operands of function <name> must be compatible character data types (that is, of the same character set).

0181U
4066

The operands of a UNION must be of equal degree.

0181V
4067

The operands of function <name> must be character data types.

0181W
4068

The operand of function <name> must contain an even number of characters.

0181X
4069

Column <name> uses an unsupported collation, <name>.

0181Y
4070

The operand of function <name> must be exact numeric.

0181Z
4071

The first operand of function <name> must be a datetime.

01820
4072

The operand of function <name> must be a datetime containing a <name>.

01821
4073

The COLLATE clause might appear only after an expression of character data type, not <name>.

01822
4074

CONTROL QUERY successful.

01823
4075

Division by zero in constant expression <name>.

01824
4076

Overflow in constant expression <name>.

01825
4077

Function <name> accepts only one or two operands.

01826
4078

Function <name> does not accept a weight operand.

01827
4079

The operands of function <name> must be numeric.

0182A
4082

Table <name> does not exist or is inaccessible.

0182C
4084

SQL object <name> is corrupt.

0182D
4085

File organization <type> of object <name> is not supported.

0182E
4086

Environment variable or define <name> does not exist.

0182F
4087

Prototype value '<name>' is not a valid qualified name.

0182G
4088

The number of values in each TRANSPOSE item of a TRANSPOSE set must be equal.

0182H
4089

Check constraint <name> contains a subquery, which is not yet supported.

0182L
4093

The number of output dynamic parameters (<num>) must equal the number of selected values (<num>).

0182M
4094

The number of output host variables (<num>) must equal the number of selected values (<num>).

0182N
4095

A DEFAULT whose value is NULL is not allowed in <name>.

0182O
4096

A DEFAULT specification is currently allowed only when simply contained in the VALUES list of an INSERT.

0182P
4097

A NULL operand is not allowed in function <name>.

0182Q
4098

A NULL operand is not allowed in operation <name>.

0182R
4099

A NULL operand is not allowed in predicate <name>.

0182S
4100

A NULL value is not allowed in a select list unless it is CAST to some data type.

0182T
4101

If <name> is intended to be a further table reference in the FROM clause, the preceding join search condition must be enclosed in parentheses.

0182U
4102

The FIRST/ANY n syntax cannot be used with in an outermost SELECT statement.

0182W
4104

If a character literal was intended, you must use the single quote delimiter instead of the double: <name> instead of <name>.

0182X
4105

Unknown translation.

0182Y
4106

The character set for the operand of function <name> must be <name>.

0182Z
4107

Column <name> has no default value, so DEFAULT cannot be specified.

01830
4108

Inside a ROWS SINCE, another sequence function contained an invalid reference to the THIS function.

01831
4109

Sequence functions placed incorrectly: <name>.

01832
4110

The query contains sequence functions but no SEQUENCE BY clause: <name>.

01833
4111

The query contains a SEQUENCE BY clause but no sequence functions.

01834
4112

Absolute and relative sampling cannot occur in the same BALANCE expression.

01835
4113

The sample size for <name> Sampling must be <num>.

01836
4114

An absolute sample size must have a scale of zero.

01837
4115

The sample size must be less than or equal to the sample period.

01838
4116

The second operand of function <name> is invalid.

01839
4117

The cursor query expression might be nonupdateable.

0183A
4118

The cursor query expression is not updateable.

0183C
4120

In a query with a GROUP BY, DISTINCT, or aggregate function, each column in the ORDER BY clause must be one of the columns explicitly SELECTed by the query. Column in error: <name>.

0183D
4121

In a query with a GROUP BY, DISTINCT, or aggregate function, each column in the ORDER BY clause must be one of the columns explicitly SELECTed by the query. Column in error: <name>. Table in scope: <name>.

0183E
4122

NULL cannot be assigned to NOT NULL column <name>.

0183F
4123

NULL cannot be cast to a NOT NULL data type.

0183G
4124

More than one table will be locked: <name>.

0183H
4125

The select list of a subquery in a row value constructor, if the subquery is one of several expressions rather than the only expression in the constructor, must be scalar (degree of one).

0183I
4126

The row value constructors in a VALUES clause must be of equal degree.

0183J
4127

Type <type> cannot be assigned to type <type>.

0183K
4128

Cannot retrieve default volume and subvolume information from =_DEFAULTS define, DEFINEINFO error <num>.

0183Q
4134

The operation (<name>) is not allowed. Try UNION ALL instead.

01846
4150

Primary key of table expression <name> must be used for join with embedded <name> expression. Tables in scope: <name>.

01847
4151

Stream access supported only on updateable views <name>.

01848
4152

Table <name> cannot be both read and updated.

01849
4153

Statement might not compile due to an order requirement on stream expression.

0184A
4154

Statement might not compile due to an order requirement on embedded <name> expression.

0184D
4157

Inner relation of left join cannot be stream expression. Tables in scope: <name>.

0184E
4158

Join of stream expressions not supported. Tables in scope: <name>.

0184F
4159

Intersection of stream expressions not supported. Tables in scope: <name>.

0184G
4160

Intersection between embedded <name> expression and embedded <name> expression not supported. Tables in scope: <name>, <name>.

0184H
4161

Union between embedded <name> expression and embedded <name> expression not supported. Tables in scope: <name>, <name>.

0184I
4162

Groupby not supported for stream expression. Tables in scope: <name>.

0184J
4163

Groupby not supported for embedded <name> expression. Tables in scope: <name>.

0184K
4164

Outer relation of right join cannot be embedded <name> expression. Tables in scope: <name>.

0184L
4165

Outer relation of right join cannot be stream expression. Tables in scope: <name>.

0184M
4166

ORDER BY clause not supported in UNION of two streams. Tables in scope: <name>, <name>.

0184N
4167

Embedded <name> statements not supported in subqueries.

0184O
4168

Stream expressions not supported in subqueries.

0184P
4169

Embedded DELETE statements not allowed when using DECLARE . . . FOR UPDATE clause.

0184Q
4170

Stream expressions not supported for insert statements.

0184R
4171

Embedded <name> statements not supported in INSERT statements.

0184T
4173

Stream expression not supported for top level UPDATE statements.

0184U
4174

JOIN_ORDER_BY_USER prevented compiler from reordering query tree.

0184V
4175

Join between embedded <name> expression and embedded <name> expression not supported. Tables in scope: <name>.

0184W
4176

Join between stream expression and embedded <name> expression not supported. Tables in scope: <name>.

0184X
4177

Update of <name> column <name> not permitted on rollback.

0184Y
4178

Update of variable length column <name> not permitted on rollback.

0184Z
4179

SEQUENCE BY not supported for stream expressions.

01850
4180

Stream expression not supported for top level DELETE statement.

0185K
4200

Stream expressions not supported for compound statements.

0185L
4201

Embedded <type> expression not supported for compound statements.

0185M
4202

SEQUENCE BY not supported for embedded <type> expressions.

0185N
4203

INSERT/UPDATE/DELETE operation on nonaudited table <name> requires index maintenance which might cause the index(es) to become corrupt.

0185O
4204

Stream access supported only for key-sequenced tables. Table: <name>.

0185P
4205

Embedded <type> supported only for key-sequenced tables. Table: <name>.

0185Q
4206

Embedded <type> supported only for updateable views. View: <name>.

0185R
4207

Index <name> and other indexes covering a subset of columns do not cover all output values of stream.

0185S
4208

Index <name> and other indexes covering a subset of columns do not cover all columns referenced in where clause of stream.

0185T
4209

Update of nullable column <name> not permitted on rollback.

0185U
4210

Embedded UPDATE/DELETE statements are not supported within an IF statement.

0185W
4212

<table-name> cannot be used to satisfy order requirement on the stream because it is partitioned.

0185X
4213

Use of rowsets in a predicate with embedded UPDATE/DELETE not supported.

0185Y
4214

The SET ON ROLLBACK clause is not allowed on a non-audited table. Table: <name>.

0185Z
4215

Stream access is not allowed on a nonaudited table. Table: <name>.

01860
4216

The FIRST/ANY n syntax cannot be used with an embedded update or embedded DELETE statement.

01861
4217

<text>

0188C
4300

Invalid usage of procedure <procedure-name> - A UDR was invoked within a trigger.

0188E
4302

Procedure <procedure-name> expects <value-1> parameters but was called with <value-2> parameters.

0188F
4303

The supplied type for parameter value of routine <routine-name> was <type-name-1> which is not compatible with the expected type <type-name-2>.

0188G
4304

Host variable or dynamic parameter <parameter-name> is used in more than one OUT or INOUT parameter for routine routine-name. Results might be unpredictable.

0188H
4305

Parameter <value> for used defined routine <routine-name> is an OUT or INOUT parameter and must be a host variable or a dynamic parameter.

0188I
4306

A CALL statement is not allowed within a compound statement.

0188J
4307

Rowset parameters are not allowed in a CALL statement.

0188K
4308

Internal error: unsupported SQL data type <value> specified for a CALL statement parameter.

01900
5000

Internal error in the query normalizer.

01I00
6000

Internal error in the query optimizer.

01I01
6001

DISTINCT aggregates can be computed only for one column per table expression.

01I02
6002

The metadata table HISTOGRAMS or HISTOGRAM_INTERVALS contains invalid values. If you have manually modified the metadata table, then you should undo your changes using the CLEAR option in UPDATE STATISTICS.

01I07
6007

Multi-column statistics for columns <name> from table <name> were not available; as a result, the access path chosen might not be the best possible.

01I08
6008

Statistics for column <name> were not available; as a result, the access path chosen might not be the best possible.

01J00
7000

Internal error in the code generator in file <name> at line <num>: <text>.

01J01
7001

Invalid default value <name> for column <name>.

01J03
7003

A plan using cluster sampling could not be produced for this query.

01K01
8001

Internal executor error.

01K02
8002

The current nowaited operation is not complete.

01K03
8003

The descriptor is locked by another nowaited operation.

01K04
8004

Trying to open a statement or cursor that is not in the closed state.

01K05
8005

Trying to fetch from a cursor that is not in the open state.

01K06
8006

The stream timed out, but the cursor is still open.

01K07
8007

The operation has been canceled.

01K08
8008

Catalog name <name> is invalid.

01K09
8009

Schema name <name> is invalid.

01K0A
8010

Default catalog name: <name>. Default schema name: <name>.

01K0B
8011

SELECT statement inside compound (BEGIN . . . END) statement returns more than one row.

01K0C
8012

Encoding of CONTROL QUERY DEFAULTs: <name>.

01K0D
8013

Trying to update or delete from a cursor that is not in the fetched state.

01K0E
8014

A SELECT statement within a compound statement did not return any row.

01K0F
8015

Aborting transaction because a compound statement performed an update operation followed by a SELECT statement that did not return any row.

01K0G
8016

An attempt was made to access <name> which has a system version that is incompatible with the version of the accessing software.

01K0H
8017

Explain information is not available for this query.

01K2S
8100

Define <name> does not exist

01K2T
8101

The operation is prevented by check constraint <name> on table <name>.

01K2U
8102

The operation is prevented by a unique constraint.

01K2V
8103

The operation is prevented by referential integrity constraint <name> on table <name>.

01K2W
8104

The operation is prevented by the check on view <name> cascaded from the check option on <name>.

01K2X
8105

The operation is prevented by the check option on view <name>.

01K3W
8140

The statement was canceled, to test cancel processing. File <name> at line <num>.

01K3X
8141

An error was artificially injected, to test error handling. File <name> at line <num>.

01K8C
8300

Late name resolution failed.

01K8D
8301

Late name resolution failed. File system error <num> on file <name>.

01K8E
8302

Late name resolution failed. SQLCODE error <num> from <name>.

01KB7
8403

The length argument of function SUBSTRING cannot be less than zero or greater than source string length.

01KB8
8404

The trim character argument of function TRIM must be one character in length.

01KB9
8405

The operand of function CONVERTTIMESTAMP is out of range.

01KBB
8407

The operand of function JULIANTIMESTAMP is out of range.

01KBD
8409

The escape character argument of a LIKE predicate must be one character in length.

01KBE
8410

An escape character in a LIKE pattern must be followed by another escape character, an underscore, or a percent character.

01KBF
8411

A numeric overflow occurred during an arithmetic computation or data conversion.

01KBG
8412

An input character host variable is missing its null terminator.

01KBH
8413

The string argument contains characters that cannot be converted.

01KBI
8414

The attempted conversion is not supported on this platform.

01KBJ
8415

The provided DATE, TIME, or TIMESTAMP is not valid and cannot be converted.

01KBK
8416

A datetime expression evaluated to an invalid datetime value.

01KBL
8417

An error occurred during the evaluation of a USER function.

01KBM
8418

The USER function is not supported on this platform.

01KBN
8419

An arithmetic expression attempted a division by zero.

01KBO
8420

Missing indicator parameter for a NULL value.

01KBP
8421

NULL cannot be assigned to a NOT NULL column.

01KBQ
8422

The provided INTERVAL is not valid and cannot be converted.

01KBR
8423

The provided field number is not valid.

01KBS
8424

Function <name> is not yet supported.

01KBT
8425

NULL cannot be assigned to a DEFAULT NULL NOT NULL column.

01KBV
8427

<text>

01KBW
8428

The argument to function <name> is not valid.

01KBX
8429

The preceding error actually occurred in function <name>.

01KFA
8550

Error <num> was returned by the Data Access Manager.

01KFB
8551

Error <num> was returned by the Distribution Service on <name>.

01KFC
8552

Error <num> was returned by the Distribution Service while fetching the version of the system <name>.

01KFD
8553

Stream overflow; subscription rate has fallen too far behind publishing rate.

01KFU
8570

Insufficient memory to build query.

01KFV
8571

Insufficient memory to execute query.

01KFW
8572

The statement has incurred a fatal error and must be deallocated.

01KFX
8573

The user does not have <name> privilege on table or view <name>.

01KFY
8574

An OPEN was blown away on table <name>.

01KFZ
8575

Timestamp mismatch on table <name>.

01KG0
8576

Statement was recompiled.

01KG1
8577

Table, index, or view <name> not found.

01KG2
8578

Similarity check passed.

01KG3
8579

Similarity check failed: <name>

01KGP
8601

Error returned from file system while locking/unlocking.

01KGQ
8602

The file system reported error <num> on a lock/unlock operation.

01KGR
8603

Trying to begin a transaction that has already been started.

01KGS
8604

Transaction subsystem <name> returned error <num> while starting a transaction.

01KGT
8605

Committing a transaction which has not started.

01KGU
8606

Transaction subsystem <name> returned error <num> on a commit transaction.

01KGV
8607

Rolling back a transaction that has not started.

01KGW
8608

Transaction subsystem <name> returned error <num> on rollback transaction.

01KGX
8609

Waited rollback performed without starting a transaction.

01KGY
8610

Transaction subsystem <name> reported error <num> on a waited rollback transaction.

01KH0
8612

Transaction mode cannot be set if the transaction is already running.

01KH1
8613

SQL cannot commit or rollback a transaction that was started by application.

01KH2
8614

SQL cannot begin a transaction when multiple contexts exist.

01KJG
8700

An assertion failure or out-of-memory condition occurred during parallel execution.

01KJQ
8710

Error <num> returned by Measure when attempting to update SQL counters.

01KM9
8801

Trying to allocate a descriptor that already exists in the current context.

01KMA
8802

Trying to allocate a statement that already exists in the current context.

01KMB
8803

The input descriptor provided does not exist in the current context.

01KMC
8804

The input statement provided does not exist in the current context.

01KMD
8805

Trying to <action> a descriptor that is not allocated with AllocDesc() call.

01KME
8806

Trying to <action> a statement that is not allocated with AllocStmt() call.

01KMF
8807

Trying to allocate more than <num> entries for a descriptor.

01KMG
8808

Module file <name> contains corrupted or invalid data.

01KMH
8809

Unable to open the module file <name>.

01KMJ
8811

Trying to close a statement that is either not in the open state or has not reached EOF.

01KMK
8812

Trying to execute a statement that is not in the closed state.

01KML
8813

Trying to fetch from a statement that is in the closed state.

01KMM
8814

The transaction mode at run time (<num>) differs from that specified at compile time (<num>).

01KMN
8815

Error while building the TCB tree when executing the statement.

01KMO
8816

Error while executing the TCB tree.

01KMP
8817

Error while fetching from the TCB tree.

01KMQ
8818

Error from root_tdb describe.

01KMR
8819

Begin transaction failed while preparing the statement.

01KMS
8820

Transaction commit failed while closing the statement.

01KMT
8821

Rollback transaction failed during the process of fetching the statement.

01KMU
8822

Unable to prepare the statement.

01KMV
8823

Internal error: IO requests are waiting for <name> message in the IpcMessageStream.

01KMW
8824

The input <module-id> does not have a module name.

01KMX
8825

Module is already added into the current context.

01KMY
8826

Unable to add the module.

01KMZ
8827

Unable to send the request <name>.

01KN0
8828

Out of memory while creating the <name>.

01KN1
8829

Trying to set descriptor item for an entry that is either invalid or greater than the maximum entry count for that descriptor.

01KN2
8830

There is no current context.

01KN3
8831

Either no current context or the module to which the statement belongs is not added to the current context.

01KN4
8832

Transaction has not been started.

01KN5
8833

The input parameter is an invalid SQL transaction command.

01KN6
8834

Unable to find Trafodion installation directory. Operating system error <num>.

01KN7
8835

Invalid SQL descriptor information requested.

01KN8
8836

Invalid update column for cursor.

01KN9
8837

Invalid user id.

01KNA
8838

Unable to receive reply from MXCMP, possibly caused by internal errors when compiling SQL statements, processing DDL statements, or executing the built in stored procedures.

01KNB
8839

Transaction was aborted.

01KNC
8840

Object name provided to CLI is invalid.

01KND
8841

User application committed or aborted a transaction started by SQL. This transaction needs to be committed or aborted by calling SQL COMMIT or ROLLBACK WORK.

01KNE
8842

The cursor, <name>, referenced by this statement is not found or is not updateable.

01KNF
8843

Trying to retrieve an item, <num>, that is out of range.

01KNG
8844

A transaction started by SQL that was committed or aborted by user application from outside of SQL, has now been cleaned up.

01KNH
8845

Internal error: root_tcb is null.

01KNI
8846

Empty SQL statement.

01KNK
8848

Cancel on DDL statements or stored procedures is not supported.

01KNM
8850

The table specified in this cursor update or DELETE statement is different than the table specified in the declare cursor statement.

01KNN
8851

CLI Parameter bound check error.

01KNO
8852

Holdable cursors are supported only for streaming cursors and embedded UPDATE/DELETE cursors.

01KNP
8853

Invalid attribute definition.

01KNQ
8854

Invalid attribute value.

01KNR
8855

Statement attribute cannot be set now.

01KNS
8856

Invalid attribute value. INPUT_ARRAY_MAXSIZE must be positive.

01KNU
8858

The value:(<num>) passed in through input a host variable/parameter is an invalid SQL identifier

01KNV
8859

There are pending insert, delete, or update operations.

01KNW
8860

Module file <name> has obsolete module header.

01KNX
8861

Module file <name> has obsolete descriptor location table header.

01KNY
8862

Module file <name> has obsolete descriptor location table entry.

01KNZ
8863

Module file <name> has obsolete descriptor header.

01KO0
8864

Module file <name> has obsolete descriptor entry.

01KO1
8865

Module file <name> has obsolete procedure location table header.

01KO2
8866

Module file <name> has obsolete procedure location table entry.

01KO3
8867

Error while reading from file <name>.

01KO4
8868

Unable to create context when current transaction is implicitly started by SQL.

01KO5
8869

The specified file number is not a QFO, or the file number is not internally associated with a QFO object (CLI internal error).

01KO6
8870

The current statement is not associated with any QFO.

01KO7
8871

Nowait tag is not specified in the <statement-id>.

01KO8
8872

Unable to execute a new operation while there is another nowaited operation pending.

01KO9
8873

The current statement is already associated with a QFO.

01KOG
8880

Cannot remove the current context.

01KOH
8881

The specified CLI context handle is not found

01KOI
8882

Containing SQL not permitted.

01KOJ
8883

The current context has violation checking functions disabled. Use SQL_EXEC_SetUdrAttributes_Internal() to enable it.

01KOK
8884

Prohibited SQL statement attempted.

01KOQ
8890

The SQL compiler failed to initialize properly. Query results might differ from what is expected, due to different compiler defaults.

01KOR
8891

Non-ASCII character host variable type for <name> field.

01KOT
8893

The statement argument count does not match the descriptor entry count.

01KOU
8894

Argument <argument-name> of CLI function <function-name> is reserved for future use and must be set to <string> when calling the function.

01KOX
8897

RPC exception in CLI request from non-trusted shadow client to trusted shadow server.

01KOY
8898

Internal error in CLI.

01KP1
8901

The MXUDR server for this statement is no longer running. The statement will be assigned a new MXUDR server if it is executed again.

01KP2
8902

Internal error: MXUDR returned an invalid UDR handle.

01KP3
8903

An attempt was made by the Trafodion to kill the MXUDR server for this statement <process-name>. PROCESS_STOP_ returned <value>.

01KP4
8904

Unable to receive reply from MXUDR, possibly caused by internal errors while executing user-defined routines.

01KP6
8906

An invalid or corrupt MXUDR reply could not be processed, possibly due to memory corruption in MXUDR while executing friendly user-defined routines or an internal error in Trafodion.

01L5K
9200

UPDATE STATISTICS encountered an error from statement <name>.

01L5L
9201

Unable to DROP object <name>.

01L5M
9202

UPDATE STATISTICS has located previously generate histogram that are not being regenerated. This might affect the plans that will be generated. Missing column lists are <column-list>.

01L5N
9203

Column names must be unique when specified in column list: (<name>).

01L5O
9204

Invalid option <option> specified. Value must be <range>.

01L5P
9205

UPDATE STATISTICS for object <name> is not supported.

01L5Q
9206

You are not authorized to read/write object <name>. Verify that you have the necessary access privileges.

01L5R
9207

You are not allowed to generate histogram statistics on an ISO88591 CHARACTER SET column which contains a null terminator character. You need to exclude this column from the column group list in UPDATE STATISTICS.

01L5S
9208

Unable to access column definitions.

01L5T
9209

Column name <name> does not exist in the table.

01L5U
9210

One of the column data types is not supported by UPDATE STATISTICS. You need to exclude this column from the column group list in UPDATE STATISTICS.

01L5W
9212

Cardinality statistics will be more accurate if you use SET ROWCOUNT option in the SAMPLE clause.

01L5X
9213

If you intend to update histogram statistics for columns, you must specify a column group list in the statement.

01L5Y
9214

Unable to CREATE object <name>.

01L5Z
9215

UPDATE STATISTICS encountered an internal error (<location>).

01M01
10001

Sort Error: No error text is defined for this error

01M03
10003

Sort Error: Warning: Scratch File EOF

01M04
10004

Sort Error: Merge is disallowed for Sort

01M05
10005

Sort Error: Unexpected error value. Check error

01M06
10006

Sort Error: Previous IO failed

01M07
10007

Sort Error: Error writing to Scratch File

01M08
10008

Sort Error: Invalid sort algorithm selected

01M0A
10010

Sort Error: Run number is invalid

01M0B
10011

Sort Error: Error reading Scratch File

01M0C
10012

Sort Error: Scratch Block number is invalid

01M0D
10013

Sort Error: No fixed disks to sort on

01M0E
10014

Sort Error: No memory to allocate scratch space

01M0F
10015

Sort Error: PROCESSHANDLE_GETMINE_ failed

01M0G
10016

Sort Error: PROCESSHANDLE_DECOMPOSE_ failed

01M0H
10017

Sort Error: DEVICE_GETINFOBYLDEV_ failed

01M0I
10018

Sort Error: FILENAME_FINDSTART_ failed

01M0J
10019

Sort Error: FILENAME_FINDNEXT_ failed

01M0K
10020

Sort Error: FILENAME_FINDFINISH_ failed

01M0L
10021

Sort Error: FILE_GETINFOLISTBYNAME_ failed

01M0M
10022

Sort Error: FILE_CREATE failed

01M0N
10023

Sort Error: FILE_OPEN_ failed

01M0O
10024

Sort Error: SetMode failed

01M0O
10024

Sort Error: SetMode failed

01M0Q
10026

Sort Error: AWAITIOX failed

01M0R
10027

Sort Error: FILE_GETINFOLIST failed

01M0S
10028

Sort Error: POSITION failed

01M0T
10029

Sort Error: FILE_GETINFO_ failed

01M18
10044

Sort Error: IO did not complete

01M1B
10047

Sort Error: Wrong length read

01N2T
11101

MXUDR: Unknown message type: <value>.

01N2V
11103

MXUDR: Invalid routine handle: <string>.

01N2W
11104

MXUDR: CLI Error: <error-text>.

01N2X
11105

MXUDR: Invalid Language Manager param mode. Parameter <parameter-value>.

01N30
11108

MXUDR: Unable to allocate memory for object <object-name>.

01N32
11110

MXUDR: Unexpected error during message processing: <string>.

01N33
11111

MXUDR: Internal error: <value>.

01N35
11113

MXUDR: Internal error: An unexpected UNLOAD request arrived for UDR handle <string>.

01N5L
11201

Language Manager initialization failed. Details: Error occurred while loading Java System Class <class-name>.

01N5M
11202

Language Manager initialization failed. Details: Unable to initialize JVM.

01N5N
11203

The Language Manager failed to create its class loader, possibly due to corrupt LmClassLoader.class file.

01N5P
11205

Java class <class-file-name> was not found in external path <path-name>.

01N5Q
11206

Java class <class-file-name> failed to initialize.

01N5R
11207

Java method <method-name> was not found in Java class <class-file-name>.

01N5S
11208

Specified signature is invalid. Reason: The list of parameter types must be enclosed in parentheses.

01N5T
11209

Specified signature is invalid. Reason: the number of parameters <value> must match the number of parameters in Java method.

01N5U
11210

Specified signature is invalid. Reason: Missing [ ] for OUT/INOUT parameter at position <value>.

01N5V
11211

Specified signature is invalid. Reason: Unknown parameter type used at position <value>.

01N5W
11212

Specified signature is invalid. Reason: Java signature size is more than supported.

01N5X
11213

Specified signature is invalid. Reason: A return type must not be specified.

01N5Z
11215

Java execution: Invalid null input value at parameter position <value>.

01N60
11216

Java execution: Data overflow occurred while retrieving data at parameter position <parameter-number>.

01N61
11217

Java execution: Data overflow occurred while retrieving data at parameter position <parameter-number>. Value is truncated.

01N62
11218

A Java method completed with an uncaught Java exception. Details: <string>.

01N63
11219

A Java method completed with an uncaught java.sql.SQLException. Details: <string>.

01N64
11220

A Java method completed with an uncaught java.sql.SQLException with invalid SQLSTATE. The uncaught exception had an SQLCODE of <SQLCODE-value> and SQLSTATE of <SQLSTATE-value>. Details: <string>.

01N65
11221

Language Manager is out of memory <string>.

01N66
11222

The operation failed because the Java Virtual Machine ran out of memory.

01N67
11223

Language Manager encountered internal error <detail-text>.

01N68
11224

JVM raised an exception. Details: <detail-text>.

01N69
11225

Specified signature is invalid. Reason: The Java signature for a Java main method must be (java.lang.<string>[ ]).

01N6A
11226

All SQL parameters associated with a Java main method must have a parameter mode of IN.

01N6B
11227

All SQL parameters associated with a Java main method must be an SQL character type.

01N6C
11228

Floating point conversion error <string>.

01P01
13001

Internal Error. Unable to translate SQL statement.

01P02
13002

Syntax error near line <num>.

01P03
13003

This feature is unsupported.

01P04
13004

No error.

01P05
13005

General programming error in file <name> at line <num>.

01P06
13006

Switch has bad value, <num>, for its expression at line <num> in file <name>.

01P07
13007

Missing output file argument after the -c option.

01P08
13008

Missing module definition file argument after the -m option.

01P09
13009

Missing listing file argument after the -l option.

01P0A
13010

Missing timestamp argument after the -t option.

01P0B
13011

<name> is an unknown command line option.

01P0C
13012

<name> is an invalid or undefined command line argument.

01P0D
13013

Help for SQLC and SQLCO is available by typing SQLC or SQLCO on the command line.

01P0E
13014

Unable to open the output source file <name>.

01P0F
13015

Unable to open the module definition file <name>.

01P0G
13016

Descriptor name <name> conflicts with SQLC default name <name>.

01P0H
13017

Descriptor <name> is multiply defined.

01P0I
13018

Descriptor name <name> is invalid.

01P0J
13019

Statement name <name> uses <name>, a reserved name SQLC generates.

01P0K
13020

Statement name <name> is multiply defined.

01P0L
13021

<name> is already defined.

01P0M
13022

Cursor <name> is already defined.

01P0N
13023

<name> is already defined as a dynamic cursor.

01P0O
13024

Cursor <name> was not declared.

01P0P
13025

Warning(s) near line <num>.

01P0Q
13026

The EXEC SQL MODULE statement must precede any cursor definitions or executable SQL statements.

01P0R
13027

Only one EXEC SQL MODULE statement is allowed.

01P0S
13028

Cannot open static cursor <name> because <name> is out of scope at time of open.

01P0T
13029

<line-number-detail-text>

01P0U
13030

<line-number-detail-text>

01P0V
13031

Expecting a single host variable of type string.

01P0W
13032

Not expecting input host variables for static cursor <name>.

01P0X
13033

Host variable <name> is in different scope than when cursor <name> was declared.

01P0Y
13034

Character set <name> is not yet supported.

01P0Z
13035

Invalid line number <num> for line pragma; ignoring the rest.

01P10
13036

C/C++ syntax error in switch/for/while condition near line <num>.

01P11
13037

Function header syntax error near line <num>.

01P12
13038

Array size <num> expected to be an unsigned integer near line <num>.

01P13
13039

Function definition is not allowed within an SQL declare section near line <num>.

01P14
13040

Expecting ")" near line <num>.

01P15
13041

Typedef encountered near line <num>, and typedefs are not supported.

01P16
13042

Unnamed declaration near line <num>.

01P17
13043

Expecting <name> near line <num>.

01P18
13044

Type specification <type> is not a recognized type near line <num>.

01P19
13045

Unexpected class declaration near line <num> ignored.

01P1A
13046

Expecting "}" to end member declaration near line <num>.

01P1B
13047

Undefined tag <name> near line <num>.

01P1C
13048

Tag <name> redefined near line <num>.

01P1D
13049

Input file not good near line <num>.

01P1E
13050

Cursor <name> not closed.

01P1F
13051

Cursor <name> not opened.

01P1G
13052

Cursor <name> not fetched.

01P1H
13053

Cursor <name> not opened or closed.

01P1I
13054

Cursor <name> not fetched or closed.

01P1J
13055

Cursor <name> not opened or fetched.

01P1K
13056

Cursor <name> not used.

01P1L
13057

End-of-file processing generated unexpected cursor status of <num> for cursor <name>.

01P1M
13058

Unable to open SQL CLI header file <name>.

01P1O
13060

Unable to open the listing file <name>.

01P1P
13061

Invalid NUMERIC precision specified near line <num>.

01P1Q
13062

Unsigned long long type not allowed near line <num>.

01P1R
13063

Identifier <name> not defined near line <num>.

01P1S
13064

Identifier <name> is not a member of struct <name> near line <num>.

01P1T
13065

End of file was found after <name> when <name> was expected, near line <num>.

01P1U
13066

Identifier <name> was expected to be a structure type near line <num>.

01P1V
13067

Unable to open source file <name>.

01P1W
13068

C/C++ syntax error near line <num>.

01P1X
13069

Missing module specification string argument after -g option.

01P1Y
13070

Module Group Specification String <MVSS-string> is not a Regular Identifier, or is longer than 31 characters.

01P1Z
13071

Module Tableset Specification String <MTSS-string> is not a Regular Identifier, or is longer than 31 characters.

01P20
13072

Module Version Specification String <MVSS-string> is not a Regular Identifier, or is longer than 31 characters.

01P21
13073

Module name <module-name> is not a value OSS file name, or is longer than 128 characters.

01P22
13074

One or more of the first three parts of the externally qualified module name <module-name> is longer than 128 characters.

01P23
13075

Externally qualified module name <module-name> is not a Regular Identifier, or is longer than 248 characters.

01P24
13076

Catalog name <catalog-name> is not a valid OSS file name, or is longer than 128 characters.

01P25
13077

Schema name <schema-name> is not a valid OSS file name, or is longer than 128 characters.

01PDW
13500

SQLCO errors

01PDX
13501

Invalid command option <name>.

01PDY
13502

Source file name must be specified.

01PDZ
13503

Missing filename for command option <name>.

01PE0
13504

Missing timestamp command option.

01PE1
13505

Source input file <name> cannot be opened.

01PE2
13506

COBOL output source file <name> cannot be opened.

01PE3
13507

Error while parsing source: <text>.

01PE4
13508

Expecting <name>, found <name>.

01PE5
13509

Expecting <name> after <name>, found <name>.

01PE6
13510

The SQL declare section might not contain COPY or REPLACE.

01PE7
13511

End of input file while processing EXEC SQL.

01PE8
13512

Input file error while processing EXEC SQL.

01PE9
13513

The BIT data type is not implemented in the Trafodion software.

01PEA
13514

The CHARACTER SET attribute is not implemented in Trafodion.

01PEB
13515

Picture <name> is not valid for a host variable.

01PEC
13516

Unexpected end of input file encountered after line <num>.

01PED
13517

Line <num> is too long to process and has been truncated.

01PEE
13518

Line <num> cannot be interpreted as a COBOL line type.

01PEF
13519

Line <num> contains an unterminated character literal.

01PEG
13520

Line <num> does not correctly continue a character literal.

01PEH
13521

Line <num>: DISPLAY host variables must be SIGN LEADING SEPARATE.

01PEI
13522

DECLARE SECTION cannot be nested.

01PEJ
13523

END DECLARE SECTION without a matching BEGIN DECLARE SECTION.

01PEK
13524

DECLARE SECTION encountered in unexpected program section.

01PEL
13525

Variable <name> might not be allocated correctly for a host variable.

01PEM
13526

Line <num>, <name>: <name> clause is not valid for a host variable.

01PEN
13527

The first declaration in an SQL DECLARE SECTION must have level 01 or 77.

01PEO
13528

Line <num>: Variable <num> is not alphabetic and cannot have a CHARACTER SET clause.

01PEP
13529

Missing END DECLARE SECTION detected at line <num>.

01PM8
13800

Line <num>: <name> is not a valid character set name.

01R00
15000

SQLCI error messages.

01R01
15001

Syntax error at or before: <string>.

01R02
15002

Internal parser error: <name.name>

01R03
15003

Incomplete statement in input: <name>

01R04
15004

Error <num> on change directory attempt to <action>.

01R05
15005

Unmatched quote in input (unterminated string): <name>

01R06
15006

Error <num> while reading from file.

01R07
15007

Error <num> while opening file <name>.

01R08
15008

The specified statement does not exist in the history buffer.

01R09
15009

The requested help topic is too long.

01R0A
15010

The help file could not be opened.

01R0B
15011

No help is available for the requested topic.

01R0C
15012

File read error on the help file.

01R0D
15013

This command is not supported by the SQLCI OLE server.

01R0E
15014

Section <name> not found in file <name>.

01R0F
15015

PARAM <name> (value <num>) cannot be converted to type <type>.

01R0G
15016

PARAM <name> not found.

01R0H
15017

Statement <name> not found.

01R0I
15018

Break was received. The last statement might be lost.

01R0J
15019

<num> values were supplied in the USING list while the statement contains <num> unnamed parameters.

01R0K
15020

The USING list must contain at least one parameter value.

01R0L
15021

The USING list cannot contain more than <num> parameter values.

01R0N
15023

The USING list value <name> exceeds the SQLCI limit of <num> characters.

01R0O
15024

The USING list quoted literal <name> must be followed by either a comma or a semicolon.

01R0P
15025

Cursor operations are not supported by SQLCI.

01R0Q
15026

Break rejected.

01R0S
15028

Break error.

01R0U
15030

The specified define already exists. Use alter or delete and add.

01R0V
15031

The specified define does not exist.

01R0W
15032

An error occurred while adding, altering or deleting this define.

01R0X
15033

Break was received.

01R0Y
15034

Invalid LOG file name.

01R0Z
15035

Permission denied to access this file

01R10
15036

Invalid Filecode OR Invalid Function Argument

01RRR
15999

SQLCI internal error.

01S00
19000

Internal error in internal stored procedure processing.

01S01
19001

Error in field description of internal stored procedure.

01S02
19002

No such internal stored procedure: <name> defined.

01S03
19003

Internal stored procedure failed without any error information returned.

01S0K
19020

Stored procedure <name> expects <num> input parameters.

01S0L
19021

Stored procedure <name> returns with error: <name>.

01T00
20000

SQL Utilities error messages.

01T31
20109

<text>

01U01
30001

A rowset must be composed of host variable arrays.

01U02
30002

The given rowset size (<num>) must be smaller or equal to the smallest dimension (<num>) of the arrays composing the rowset.

01U03
30003

Rowset size must be an integer host variable or constant.

01U04
30004

The dimension of the arrays composing the rowset must be greater than zero. A value of <num> was given.

01U05
30005

The dimensions of the arrays composing the rowset are different. The smallest dimension is assumed.

01U06
30006

Rowset and one-dimensional variable are in output list.

01U07
30007

Incompatible assignment from type <type> to type <type>

01U08
30008

Internal error. Rowset index is out of range.

01U09
30009

Internal error. Trying to add more elements than maximum rowset size.

01U0A
30010

Internal error. Rowset is corrupted.

01U0B
30011

More than one INTO statement in the same query is not supported.

01U0C
30012

Rowset index <name> must be specified last in the derived column list of <name>.

01U0D
30013

Hostvar used to set input size of rowset has zero or negative value.

01U0E
30014

Hostvar used to set input size of rowset is not of type short, int, or long.

01U0K
30020

Embedded UPDATE/DELETE cannot be used with SELECT. . .INTO and rowset.

01Y00
16000

Error message file not found.

01Y01
16001

No message found for error or warning <sqlcode>.

02000
100

The "no data" completion condition (SQLCODE = +100).

01Z01
25001

Program <executable>, executing on <node>, has encountered a version error.

01Z2S
25100

Remote node <node> runs an incompatible version of Trafodion. The Trafodion version (version) of <node> is <version-1>, the local node does not support versions older than <version-2>.

01Z2T
25101

Remote node <node> runs an incompatible version of Trafodion. The Trafodion version (version) of <node> is <version-1>, the local node supports only version <version-2>.

01Z2U
25102

Remote node <node> runs a version of Trafodion which cannot interoperate with other versions. The Trafodion version (version) of <node> is <version-1>.

01Z8C
25300

Module <module> has module version <version-1>; node <node> does not support module versions lower than <version-2>.

01Z8D
25301

Module <module> has module version <version-1>; the local node does not support module versions higher than <version-2>.

01Z8I
25306

A required system module has module version <version-1>; node <node> does not support query plans from modules with module version lower than <version-2>.

01Z8J
25307

The query plan can be executed only by a node with Trafodion version (version) <version-1>, the version of <node> is <version-1>.

01Z8K
25308

The query plan has plan version <version-1>, the local Trafodion version (version) can execute only query plans with plan version <version-1>.

01Z8L
25309

Module <module> can be executed only by a node with Trafodion version (version) version1, the version of <node> is <version-1>.

01Z8M
25310

Module <module> has module version <version-1>, the local Trafodion version (version) can execute only modules with module version <version-1>.

01Z8N
25311

System module <module> has a wrong module version. The expected module version is <version-1>. the actual module version is <version-2>.

02000
100

T h e "no data" completion condition (SQLCODE=+100).

07001
-15015

PARAM <name> (value <num>) cannot be converted to type <type>.

07001
-15016

PARAM <name> not found.

07001
-15019

<num> values were supplied in the USING list while the statement contains <num> unnamed parameters.

07008
-8807

Trying to allocate more than <num> entries for a descriptor.

07008
-8893

The statement argument count does not match the descriptor entry count.

07009
-8829

Trying to set descriptor item for an entry that is either invalid or greater than the maximum entry count for that descriptor.

07009
-8843

Trying to retrieve an item, <num>, that is out of range.

0A000
-1010

The statement just specified is currently not supported.

0A000
-1048

Currently only supporting restrict drop behavior.

0A000
-1074

SQL system metadata not supported by this catalog manager version.

0A000
-1090

Self-referencing constraints are currently not supported.

0A000
-1091

The constraint, index, or file option is not supported on a vertically partitioned table.

0A000
-1120

Attempting to change the audit flags for a table in an unsupported way.

0A000
-1121

Attempting to perform a partition add, move, or drop on table <name>. Partition operations are not allowed on tables with vertical partitions, entry sequenced operations, and SYSKEYonly partitioned tables.

0A000
-1126

Referential integrity is not yet supported. Constraint <name> will not be enforced.

0A000
-1142

Attempting to add a column with a NULL, UNIQUE, CHECK, PRIMARY KEY, or FOREIGN KEY constraint defined. This is not supported for a nonaudited table.

0A000
-13003

This feature is unsupported.

0A000
-13034

Character set <name> is not yet supported.

0A000
-13041

Typedef encountered near line <num>, and typedefs are not supported.

0A000
-15013

This command is not supported by the SQLCI OLE server.

0A000
-15025

Cursor operations are not supported by SQLCI.

0A000
-2072

A simple value specification that is a literal is not yet supported.

0A000
-3009

DROP ASSERTION statement is not yet supported.

0A000
-3010

Character set <name> is not yet supported.

0A000
-3022

The <name> operator is not yet supported.

0A000
-3023

The COLLATE clause in a sort specification is not yet supported.

0A000
-3024

The MATCH PARTIAL clause is not yet supported.

0A000
-3028

Specifying a privilege column list in the INSERT clause is not yet supported.

0A000
-3029

<name> is not yet supported in referential integrity constraint definition.

0A000
-3030

The PARALLEL EXECUTION clause is not yet supported.

0A000
-3031

CASCADE drop behavior is not yet supported.

0A000
-3032

The COLUMN clause in the ALTER TABLE statement is not yet supported.

0A000
-3033

The MOVE clause in the ALTER TABLE statement is not yet supported.

0A000
-3034

The PARTITION clause in the ALTER TABLE statement is not yet supported.

0A000
-3035

The RENAME clause in the ALTER TABLE statement is not yet supported.

0A000
-3036

The SET CONSTRAINT clause in the ALTER TABLE statement is not yet supported.

0A000
-3070

The [NO]AUDIT clause is not supported.

0A000
-3080

The [NO]SERIALWRITES clause is not supported.

0A000
-3105

Currently only range, hash and system partitioning are supported.

0A000
-3119

The WITH LOCAL CHECK OPTION clause is not supported.

0A000
-3120

The CREATE ASSERTION statement is not yet supported.

0A000
-3121

Partitioned entry-sequenced tables are not yet supported.

0A000
-3130

UNSIGNED option is not supported for LARGEINT type.

0A000
-3131

The statement just specified is currently not supported.

0A000
-3137

UNION JOIN is not yet supported.

0A000
-3169

<name> is not a known collation.

0A000
-4026

Reading from and inserting into, or updating in, or deleting from the same table, <name>, is not currently supported.

0A000
-4060

Reading from and inserting into, or updating in, or deleting from the same table, <name>, is not currently supported. <name> is contained by view(s) <name>.

0A000
-4069

Column <name> uses an unsupported collation, <name>.

0A000
-4085

File organization <name> of object <name> is not supported.

0A000
-4089

Check constraint <name> contains a subquery, which is not yet supported.

0A000
-4096

A DEFAULT specification is currently allowed only when simply contained in the VALUES list of an INSERT.

0A000
-4103

Reading from and inserting into the same table <name> is not currently supported. View <name> contains <name>.

0A000
-6001

DISTINCT aggregates can be computed only for one column per table expression.

0A000
-8414

The attempted conversion is not supported on this platform.

0A000
-8418

The USER function is not supported on this platform.

0A000
-8424

Function <name> is not yet supported.

0A000
-8848

Cancel on DDL statements or stored procedures is not supported.

22001
-8402

A string overflow occurred during the evaluation of a character expression.

22002
-8420

Missing indicator parameter for a NULL value.

22003
-8411

A numeric overflow occurred during an arithmetic computation or data conversion.

22007
-3045

Invalid date '<date>'.

22007
-3046

Invalid time '<time>'.

22007
-3047

Invalid timestamp '<timestamp>'.

22007
-3158

Invalid DATETIME <datetime>.

22007
-8413

The string argument contains characters that cannot be converted.

22007
-8415

The provided DATE, TIME, or TIMESTAMP is not valid and cannot be converted.

22007
-8422

The provided INTERVAL is not valid and cannot be converted.

22008
-8405

The operand of function CONVERTTIMESTAMP is out of range.

22008
-8407

The operand of function JULIANTIMESTAMP is out of range.

22008
-8416

A datetime expression evaluated to an invalid datetime value.

22008
-8403

The length argument of function SUBSTRING cannot be less than zero or greater than source string length.

22008
-4075

Division by zero in constant expression <name>.

22012
-8419

An arithmetic expression attempted a division by zero.

22015
-3044

Invalid interval <num>.

22019
-8409

The escape character argument of a LIKE predicate must be one character in length.

22019
-8412

An input character host variable is missing its null terminator.

22019
-8410

An escape character in a LIKE pattern must be followed by another escape character, an underscore, or a percent character.

22027
-8404

The trim character argument of function TRIM must be one character in length.

23000
-8101

The operation is prevented by check constraint <name> on table <name>.

23000
-8102

The operation is prevented by a unique constraint.

23000
-8103

The operation is prevented by referential integrity constraint <name> on table <name>.

23000
-8421

NULL cannot be assigned to a NOT NULL column.

24000
-8004

Trying to open a statement or cursor that is not in the closed state.

24000
-8005

Trying to fetch from a cursor that is not in the open state.

24000
-8013

Trying to update or delete from a cursor that is not in the fetched state.

24000
-8811

Trying to close a statement that is either not in the open state or has not reached EOF.

24000
-8812

Trying to execute a statement that is not in the closed state.

24000
-8813

Trying to fetch from a statement that is in the closed state.

24000
-8850

The table specified in this cursor update or DELETE statement is different than the table specified in the declare cursor statement.

25000
-1111

Error starting transaction.table name.schema.name

25000
-1112

Error committing transaction.table name.schema.name

25000
-3114

Transaction access mode READ WRITE is incompatible with isolation level READ UNCOMMITTED.

25000
-3140

The isolation level cannot be READ UNCOMMITTED for an INSERT, UPDATE, DELETE, or DDL statement.

25000
-3141

The transaction access mode cannot be READ ONLY for an INSERT, UPDATE, DELETE, or DDL statement.

25000
-8603

Trying to begin a transaction that has already been started.

25000
-8604

Transaction subsystem <name> returned error <num> while starting a transaction.

25000
-8605

Committing a transaction which has not started.

25000
-8606

Transaction subsystem <name> returned error <num> on a commit transaction.

25000
-8612

Transaction mode cannot be set if the transaction is already running.

25000
-8613

SQL cannot commit or rollback a transaction that was started by application.

25000
-8614

SQL cannot be begin a transaction when multiple contexts exist.

25000
-8814

The transaction mode at run time (<num>) differs from that specified at compile time (<num>).

25000
-8819

Begin transaction failed while preparing the statement.

25000
-8820

Transaction commit failed while closing the statement.

25000
-8832

Transaction has not been started.

25000
-8833

The input parameter is an invalid SQL transaction command.

25000
-8841

User application committed or aborted a transaction started by SQL. This transaction needs to be committed or aborted by calling SQL COMMIT or ROLLBACK WORK.

25000
-8844

A transaction started by SQL that was committed or aborted by user application from outside of SQL, has now been cleaned up.

26000
-15017

Statement <name> not found.

26000
-2065

Statement <name> was not found in module <name>.

26000
-8802

Trying to allocate a statement that already exists in the current context.

26000
-8804

The input statement provided does not exist in the current context.

26000
-8806

Trying to <action> a statement that is not allocated with AllocStmt() call.

2B000
-1014

Privileges were not revoked. Dependent privilege descriptors still exist.

33000
-8801

Trying to allocate a descriptor that already exists in the current context.

33000
-8803

The input descriptor provided does not exist in the current context.

33000
-8805

Trying to <action> a descriptor that is not allocated with AllocDesc() call.

34000
-2066

Cursor <name> was not found in module <name>.

38000
-11218

A Java method completed with an uncaught Java exception. Details: <string>.

39001
-11220

A Java method completed with an uncaught java.sql.SQLException with invalid SQLSTATE. The uncaught exception had an SQLCODE of <SQLCODE-value> and SQLSTATE of <SQLSTATE-value>. Details: <string>.

3D000
-8008

Catalog name <name> is invalid.

3F000
-8009

Schema name <name> is invalid.

40000
-1113

Error rolling back transaction. <table name.schema.name>

40000
-2007

Internal error: need to rollback transaction.

40000
-2009

The user transaction must be rolled back (or committed, if that makes sense in the application) before MXCMP can be restarted and proceed.

40000
-8015

Aborting transaction because a compound statement performed an update operation followed by a SELECT statement that did not return any row.

40000
-8607

Rolling back a transaction that has not started.

40000
-8609

Waited rollback performed without starting a transaction.

40000
-8821

Rollback transaction failed during the process of fetching the statement.

40000
-8839

Transaction was aborted.

40003
-8608

Transaction subsystem <name> returned error <num> on rollback transaction.

40003
-8610

Transaction subsystem <name> reported error <num> on a waited rollback transaction.

42000
-1000

A syntax error occurred.

42000
-3201

EXTERNAL PATH clause is required.

42000
-3202

PARAMETER STYLE clause is required.

42000
-3203

LANGUAGE clause is required.

42000
-3204

EXTERNAL NAME clause is badly formed.

42000
-3205

EXTERNAL NAME clause is required.

42000
-3206

The name for an object of this type must be fully qualified, or set NAMETYPE ANSI.

42000
-3207

Value for DYNAMIC RESULT SETS must be zero.

42000
-3208

UNSIGNED numeric is not allowed for routine parameter.

42000
-1123

Unable to process the partition key values (<num>) for object <name>. Please verify that the correct key value data types were specified.

42000
-1136

For an added column, the PRIMARY KEY clause cannot be NOT DROPPABLE.

42000
-1186

Column <name> is of type <type>, incompatible with the default value’s type, <type>.

42000
-13002

Syntax error near line <num>.

42000
-13025

Warning(s) near line <num>.

42000
-13036

C/C++ syntax error in switch/for/while condition near line <num>.

42000
-13037

Function header syntax error near line <num>.

42000
-13068

C/C++ syntax error near line <num>.

42000
-15001

Syntax error at or before: <string>.

42000
-15002

Internal parser error: <name.name>

42000
-15003

Incomplete statement in input: <name>

42000
-15005

Unmatched quote in input (unterminated string): <name>

42000
-15020

The USING list must contain at least one parameter value.

42000
-15021

The USING list cannot contain more than <num> parameter values.

42000
-15022

A USING list unquoted literal is the empty string.

42000
-15023

The USING list value <num> exceeds the SQLCI limit of <num> characters.

42000
-15024

The USING list quoted literal <name> must be followed by either a comma or a semicolon.

42000
-2050

<name> is not the name of any DEFAULTS table attribute.

42000
-2051

Invalid <name> option <name> or value '<num>'.

42000
-2055

Invalid value '<num>' for DEFAULTS attribute <name>.

42000
-2056

The value must be a number in the range <num>.

42000
-2057

The value must be a multiple of <num>.

42000
-2058

DEFAULTS attribute <name> is of type <type> but is being converted to <type>.

42000
-2060

Procedure <name> has already been defined in this module. The previous definition is being retained and this latest one ignored.

42000
-2061

Static cursor <name> has already been defined in this module. The previous definition, as a static cursor, is being retained and this latest one ignored.

42000
-2062

Static cursor <name> has already been defined in this module. The previous definition, as a dynamic cursor, is being retained and this latest one ignored.

42000
-2063

Dynamic cursor <name> has already been defined in this module. The previous definition, as a static cursor, is being retained and this latest one ignored.

42000
-2064

Dynamic cursor <name> has already been defined in this module. The previous definition, as a dynamic cursor, is being retained and this latest one ignored.

42000
-2067

Descriptor <name> has already been defined in this module. The previous definition is being retained and this latest one ignored.

42000
-2068

A procedure body must be a SELECT, INSERT, UPDATE, DELETE, DECLARE CATALOG, DECLARE SCHEMA, or a static DECLARE CURSOR.

42000
-2069

A static cursor declaration might appear only in the body of a procedure.

42000
-2070

Invalid statement type in this context.

42000
-2071

The name <name> has already been declared or defined in this module. The previous definition, as a <type>, is being retained and this latest one ignored.

42000
-2091

The required module statement was not found in file <name>.

42000
-2092

A module statement has already appeared in this file. The previous definition, <name>, is being retained and this latest one ignored.

42000
-2093

A module timestamp statement was not found in file <name>.

42000
-2094

A module timestamp statement has already appeared in this module. The previous timestamp is being retained and this latest one ignored.

42000
-2093

A module timestamp statement was not found in file <name>.

42000
-2094

A module timestamp statement has already appeared in this module. The previous timestamp is being retained and this latest one ignored.

42000
-2200

DEFAULTS attribute <name> is read-only.

42000
-30001

A rowset must be composed of host variable arrays.

42000
-30002

The given rowset size (<num>) must be smaller or equal to the smallest dimension (<num>) of the arrays composing the rowset.

42000
-30003

Rowset size must be an integer host variable or constant.

42000
-30004

The dimension of the arrays composing the rowset must be greater than zero. A value of <num> was given.

42000
-30005

The dimensions of the arrays composing the rowset are different. The smallest dimension is assumed.

42000
-30006

Rowset and one-dimensional variable are in output list.

42000
-30007

Incompatible assignment from type <type> to type <type>

42000
-3001

Syntax error at or before <SQL-text>.

42000
-3002

<name> is not a valid column reference; it has more than 4 name parts.

42000
-3003

Length or precision must be greater than zero.

42000
-3004

A delimited identifier must contain at least one non-blank character.

42000
-3005

A DECLARE CURSOR statement cannot dynamically get its cursor name from a host variable while also statically declaring a cursor specification. A dynamic cursor requires the name of a previously prepared statement, or a host variable containing such a name; a static cursor requires a fixed, static name.

42000
-3006

In a dynamic cursor declaration both the cursor and the statement must be named in the same way: both must be literals or both must be string host variable expressions.

42000
-3007

In an ALLOCATE CURSOR statement both the cursor and the statement must be named using string host variables.

42000
-3008

Precision of <name> UNSIGNED data type, <value>, cannot exceed 9.

42000
-3011

<name> is not a valid qualified name; it has more than 3 name parts.

42000
-3012

COUNT is the only aggregate function that accepts (\*) as an operand.

42000
-3013

Subtraction is the only operation allowed in the parenthesized expression preceding an interval qualifier.

42000
-3014

Precision of numeric, <value>, cannot exceed 18.

42000
-3015

Scale <value> cannot exceed precision <value>.

42000
-3016

Precision of decimal, <value>, cannot exceed 18.

42000
-3017

Expected an unsigned integer, not <value>.

42000
-3018

Expected an unsigned smallint, not <value>.

42000
-3019

Expected an unsigned number within the parentheses, not <value>.

42000
-3020

Expected an unsigned number as the first operand within the parentheses, not <value>.

42000
-3021

Expected an unsigned number as the second operand within the parentheses, not <value>.

42000
-3025

The format of the subvolume name part in the specified location name <name> is invalid. The subvolume name part must be eight characters long and begin with the letters ZSD.

42000
-3026

A comma must be used to separate file attributes.

42000
-3027

<name> is not a valid simple name; it has more than one name part.

42000
-3037

Precision of type <data-type> cannot exceed 18.

42000
-3038

PIC X types cannot have leading signs, or any signs at all.

42000
-3039

PIC X types do not have any COMP representation.

42000
-3040

Precision zero is invalid. Add a '9' to the PICTURE clause.

42000
-3041

UNSIGNED is invalid for a numeric or decimal type with a scale greater than 9.

42000
-3042

UPSHIFT for a numeric type is invalid.

42000
-3043

Precision greater than 18 for a COMP numeric type is invalid.

42000
-3048

Dynamic parameters, such as <name>, are not allowed in a static compilation.

42000
-3049

Host variables, such as <name>, are not allowed in a dynamic compilation.

42000
-3050

The constraint must have the same catalog and schema as the specified table.

42000
-3051

Duplicate HEADING clauses in column definition <name>.

42000
-3052

Duplicate NOT NULL clauses in column definition <name>.

42000
-3053

Duplicate PRIMARY KEY clauses in column definition <name>.

42000
-3054

The NOT DROPPABLE clause is allowed only in PRIMARY KEY and NOT NULL constraint definitions.

42000
-3055

Duplicate DELETE rules specified.

42000
-3056

Duplicate UPDATE rules specified.

42000
-3057

Invalid size value in the ALLOCATE clause.

42000
-3058

The BLOCKSIZE value must be 4096.

42000
-3059

Invalid size value in the MAXSIZE clause.

42000
-3060

Invalid percentage value in the DSLACK clause.

42000
-3061

The format of the specified location name <name> is invalid.

42000
-3062

Duplicate MAXSIZE clauses in the PARTITION clause.

42000
-3063

Duplicate DSLACK clauses in the PARTITION clause.

42000
-3064

Duplicate ISLACK clauses in the PARTITION clause.

42000
-3065

The primary key constraint cannot be droppable when the STORE BY PRIMARY KEY clause appears in a table definition.

42000
-3067

ALTER TABLE ADD CONSTRAINT allows only DROPPABLE constraints.

42000
-3068

The ALLOCATE and DEALLOCATE clauses cannot coexist in the same ALTER INDEX statement.

42000
-3071

Duplicate [NO]AUDITCOMPRESS clauses.

42000
-3072

The BLOCKSIZE clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

42000
-3073

Duplicate [NO]BUFFERED clauses.

42000
-3074

Duplicate [NO]CLEARONPURGE clauses.

42000
-3075

The [NO]COMPRESS clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

42000
-3076

Duplicate DEALLOCATE clauses.

42000
-3077

The [NO]ICOMPRESS clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

42000
-3078

The LOCKLENGTH clause is not allowed in the ALTER INDEX . . . ATTRIBUTE(S) statement.

42000
-3079

Duplicate MAXSIZE clauses.

42000
-3081

Duplicate ALLOCATE clauses.

42000
-3082

Duplicate [NO]AUDIT clauses.

42000
-3083

Duplicate [NO]AUDITCOMPRESS clauses.

42000
-3084

The BLOCKSIZE clause is not allowed in the ALTER TABLE . . . ATTRIBUTE(S) statement.

42000
-3085

Duplicate [NO]BUFFERED clauses.

42000
-3086

Duplicate [NO]CLEARONPURGE clauses.

42000
-3087

The [NO]COMPRESS clause is not allowed in the ALTER TABLE . . . ATTRIBUTE(S) statement.

42000
-3088

The ALLOCATE AND DEALLOCATE cannot coexist in the same ALTER TABLE statement.

42000
-3089

The [NO]ICOMPRESS clause is not allowed in the ALTER TABLE . . . ATTRIBUTE(S) statement.

42000
-3090

Duplicate LOCKLENGTH clauses.

42000
-3091

The [NO]AUDIT clause is not allowed in the CREATE INDEX statements.

42000
-3092

Duplicate BLOCKSIZE clauses.

42000
-3093

Duplicate DCOMPRESS clauses.

42000
-3094

The DEALLOCATE clause is not allowed in the CREATE INDEX statements.

42000
-3095

Duplicate [NO]ICOMPRESS clauses.

42000
-3096

Duplicate [NO]SERIALWRITES clauses.

42000
-3097

The DEALLOCATE clause is not allowed in the CREATE TABLE statements.

42000
-3098

Duplicate LOCATION clauses.

42000
-3099

Duplicate FILE ATTRIBUTE(S) clauses.

42000
-3100

Duplicate DSLACK clauses.

42000
-3101

Duplicate ISLACK clauses.

42000
-3102

Duplicate PARALLEL EXECUTION clauses.

42000
-3103

Duplicate PARTITION clauses.

42000
-3104

Only the ADD option is allowed in a PARTITION clause in a CREATE TABLE statement.

42000
-3106

Duplicate PRIMARY KEY clauses.

42000
-3107

Duplicate LIKE clauses.

42000
-3108

The LIKE clause and STORE BY clause cannot coexist in the same statement.

42000
-3109

Duplicate STORE BY clauses.

42000
-3110

The LIKE clause and ATTRIBUTE(S) clause cannot coexist in the same statement.

42000
-3111

The LIKE clause and LOCATION clause cannot coexist in the same statement.

42000
-3112

The LIKE clause and PARTITION clause cannot coexist in the same statement.

42000
-3113

Error in CONTROL statement: <name>

42000
-3115

Duplicate ISOLATION LEVEL clause specified.

42000
-3116

Duplicate transaction access mode clause specified.

42000
-3117

Duplicate DIAGNOSTICS SIZE specified.

42000
-3118

Identifier too long.

42000
-3122

The format of the system name part in the specified location name <name> is invalid.

42000
-3123

The format of the file name part in the specified location name <name> is invalid. The file name part must be eight characters long and end with the digits 00.

42000
-3127

Invalid character in identifier <name>.

42000
-3128

<name> is a reserved word. It must be delimited by double- quotes to be used as an identifier.

42000
-3129

Function <name> accepts exactly one operand.

42000
-3132

The HEADING for column <name> exceeds the maximum size of 128 characters.

42000
-3133

PERFORM is valid only in COBOL programs.

42000
-3134

Precision of time or timeStamp, <num>, cannot exceed 6.

42000
-3135

Precision of float, <value>, cannot exceed 54.

42000
-3136

Only LEFT, RIGHT, and FULL OUTER JOIN are valid in \{oj . . .}

42000
-3138

A key-sequenced table with range partitioning requires a FIRST KEY clause.

42000
-3139

A range-partitioned index requires a FIRST KEY clause.

42000
-3142

INTO clause host variables are not allowed in a static cursor.

42000
-3143

BROWSE or READ UNCOMMITTED access is not allowed on a table value constructor.

42000
-3145

Positioned UPDATE or DELETE is allowed only in embedded SQL.

42000
-3147

In an IN predicate whose right operand is a value list, the left operand must be scalar (degree of one).

42000
-3149

Duplicate WITH CONSTRAINTS phrases in LIKE clause in CREATE TABLE statement.

42000
-3150

Duplicate WITH HEADING phrases in LIKE clause in CREATE TABLE statement.

42000
-3151

Duplicate WITH HORIZONTAL PARTITIONS phrases in LIKE clause in CREATE TABLE statement.

42000
-3153

The FIRST KEY clause is not allowed with hash partitioning.

42000
-3155

The POPULATE and NO POPULATE clauses cannot coexist in the same CREATE INDEX statement.

42000
-3157

Catalog name is required.

42000
-3159

If you intended <name> to be a character set specifier for a character string literal, you must remove the spaces in front of the single quote delimiter.

42000
-3160

<name> was declared more than once in the procedure parameter list.

42000
-3161

<name> was not declared in the procedure parameter list.

42000
-3164

Data type mismatch between output host variable and selected value.

42000
-3165

Min or max precision or exponent value exceeded, <num>.

42000
-3166

Min or max value for float or double value exceeded, <num>. 42000 -3167 Duplicate [ NOT ] DROPPABLE clauses.

42000
-3168

The FOR . . . ACCESS clause is not allowed in a CREATE VIEW statement.

42000
-3171

Transaction statements are not allowed in compound statements.

42000
-3172

EXIT is not allowed in a compound statement.

42000
-3173

UPDATE STATISTICS is not allowed in a compound statement.

42000
-3174

DDL statements are not allowed in compound statements.

42000
-3175

Dynamic SQL statements are not allowed in compound statements.

42000
-3176

Subqueries are not allowed in the IF Condition.

42000
-3177

Character set <name> requires an even number of characters in the length declaration of the data type.

42000
-3178

One or more of the following external (host-language) data types incorrectly appears within the SQL query or operation: <type>.

42000
-3179

Collation <name> is not defined on the character set <name>.

42000
-3180

STREAM statements are not allowed in compound statements.

42000
-3181

Invalid logical name, a three part logical name is required.

42000
-3187

Not supported: SET STREAM TIMEOUT per a specific stream.

42000
-3189

cannot set lock timeout on a view.

42000
-4001

Column <name> is not found. Tables in scope: <name>. Default schema: <name>.

42000
-4002

Column <name> is not found. Table <name> not exposed. Tables in scope: <name>. Default schema: <name>.

42000
-4003

Column name is not a column in table <name>, or, after a NATURAL JOIN or JOIN USING, is no longer allowed to be specified with a table correlation name.

42000
-4004

Column name <name> is ambiguous. Tables in scope: <name>. Default schema: <name>.

42000
-4005

Column reference <name> must be a grouping column or be specified within an aggregate.

42000
-4006

Within an aggregate, all column references must come from the same scope.

42000
-4007

The select list index <num> is out of range. It must be between 1 and the number of select expressions, which in this case is <num>.

42000
-4008

A subquery is not allowed inside an aggregate function.

42000
-4009

An aggregate is not allowed inside an aggregate function.

42000
-4010

There are no columns with the correlation name <name>.

42000
-4011

Ambiguous star column reference <name>.

42000
-4012

Column reference <name> must be a grouping column or be specified within an aggregate. On this grouped table a star reference is not allowed.

42000
-4013

Column <name> is a system column and cannot be updated or inserted into.

42000
-4014

The operands of an INTERSECT must be of equal degree.

42000
-4010

There are no columns with the correlation name <name>.

42000
-4011

Ambiguous star column reference <name>.

42000
-4012

Column reference <name> must be a grouping column or be specified within an aggregate. On this grouped table a star reference is not allowed.

42000
-4013

Column <name> is a system column and cannot be updated or inserted into.

42000
-4014

The operands of an INTERSECT must be of equal degree.

42000
-4015

Aggregate functions placed incorrectly: <name>.

42000
-4016

The number of derived columns (<num>) must equal the degree of the derived table (<num>).

42000
-4017

Derived column name <name> was specified more than once.

42000
-4018

Rows cannot be deleted from an entry-sequenced table.

42000
-4019

The select list of a subquery in a select list must be scalar (degree of one).

42000
-4020

Arithmetic operations on row value constructors are not allowed.

42000
-4021

The select list contains a nongrouping non-aggregated column, <name>.

42000
-4022

Target column <name> was specified more than once.

42000
-4023

The degree of each row value constructor (<num>) must equal the degree of the target table column list (<num>).

42000
-4024

Column <name> has no default value, so must be explicitly specified in the insert column list.

42000
-4025

Error while preparing constraint <name> on table <name>.

42000
-4027

Table <name> is not insertable.

42000
-4028

Table <name> is not updateable.

42000
-4030

Column <name> is an invalid combination of datetime fields (<num>, <num>, <num>).

42000
-4031

Column <name> is an unknown data type, <num>.

42000
-4032

Column <name> is an unknown class, <num>. It is neither a system column nor a user column.

42000
-4033

Column <name> is a primary or clustering key column and cannot be updated.

42000
-4034

The operation (<name> <name> <name>) <name> is not allowed.

42000
-4035

Type <type> cannot be cast to type <type>.

42000
-4036

The source field of the EXTRACT function must be of DateTime or Interval type.

42000
-4037

Field <name> cannot be extracted from a source of type <type>.

42000
-4038

The operand of an AVG or SUM function must be numeric or interval.

42000
-4039

Column <name> is of type <type>, incompatible with the value’s type, <type>.

42000
-4040

The operands of a BETWEEN predicate must be of equal degree.

42000
-4041

Type <type> cannot be compared with type <type>.

42000
-4042

The operands of a comparison predicate must be of equal degree.

42000
-4043

The operand of function <name> must be character.

42000
-4044

Collation <name> does not support the <name> predicate or function.

42000
-4045

The operand of function <name> must be numeric.

42000
-4046

The operands of function <name> must be exact numeric.

42000
-4047

The operands of function <name> must have a scale of 0.

42000
-4048

The third operand of a ternary comparison operator must be of type BOOLEAN, not <name>.

42000
-4049

A CASE expression cannot have a result data type of both <type> and <type>.

42000
-4050

The operands of the <name> predicate must be comparable character data types (that is, of the same character set and collation).

42000
-4051

The first operand of function <name> must be character.

42000
-4052

The second operand of function <name> must be numeric.

42000
-4053

The third operand of function <name> must be numeric.

42000
-4055

The select lists or tuples must have comparable data types. <type> and <type> are not comparable.

42000
-4056

Exposed name <name> appears more than once.

42000
-4057

Correlation name <name> conflicts with qualified identifier of table <name>.

42000
-4059

The first operand of function <name> must be numeric.

42000
-4061

Rows cannot be inserted into, or updated in, an individual table partition.

42000
-4062

The preceding error actually occurred in function <name>.

42000
-4063

The operands of function <name> must be comparable character data types (that is, of the same character set and collation).

42000
-4064

The operands of function <name> must be compatible character data types (that is, of the same character set).

42000
-4066

The operands of a UNION must be of equal degree.

42000
-4067

The operands of function <name> must be character data types.

42000
-4068

The operand of function <name> must contain an even number of characters.

42000
-4070

The operand of function <name> must be exact numeric.

42000
-4071

The first operand of function <name> must be a datetime.

42000
-4072

The operand of function <name> must be a datetime containing a <name>.

42000
-4073

The COLLATE clause might appear only after an expression of character data type, not <type>.

42000
-4076

Overflow in constant expression <name>.

42000
-4077

Function <name> accepts only one or two operands.

42000
-4078

Function <name> does not accept a weight operand.

42000
-4079

The operands of function <name> must be numeric.

42000
-4082

Table <name> does not exist or is inaccessible.

42000
-4084

SQL object <table-name> is corrupt.

42000
-4086

Environment variable or define <name> does not exist.

42000
-4087

Prototype value '<name>' is not a valid qualified name.

42000
-4088

The number of values in each TRANSPOSE item of a TRANSPOSE set must be equal.

42000
-4093

The number of output dynamic parameters (<num>) must equal the number of selected values (<num>).

42000
-4094

The number of output host variables (<num>) must equal the number of selected values (<num>).

42000
-4095

A DEFAULT whose value is NULL is not allowed in <name>.

42000
-4097

A NULL operand is not allowed in function <name>.

42000
-4098

A NULL operand is not allowed in operation <name>.

42000
-4099

A NULL operand is not allowed in predicate <name>.

42000
-4100

A NULL value is not allowed in a select list unless it is CAST to some data type.

42000
-4101

If <name> is intended to be a further table reference in the FROM clause, the preceding join search condition must be enclosed in parentheses.

42000
-4104

If a character literal was intended, you must use the single quote delimiter instead of the double: <name> instead of <name>.

42000
-4105

Unknown translation.

42000
-4106

The character set for the operand of function <name> must be <name>.

42000
-4107

Column <name> has no default value, so DEFAULT cannot be specified.

42000
-4108

Inside a ROWS SINCE, another sequence function contained an invalid reference to the THIS function.

42000
-4109

Sequence functions placed incorrectly: <name>.

42000
-4110

The query contains sequence functions but no SEQUENCE BY clause: <name>.

42000
-4111

The query contains a SEQUENCE BY clause but no sequence functions.

42000
-4112

Absolute and relative sampling cannot occur in the same BALANCE expression.

42000
-4113

The sample size for <name> Sampling must be <num>.

42000
-4114

An absolute sample size must have a scale of zero.

42000
-4115

The sample size must be less than or equal to the sample period.

42000
-4116

The second operand of function <name> is invalid.

42000
-4117

The cursor query expression might be nonupdatable.

42000
-4118

The cursor query expression is not updateable.

42000
-4120

In a query with a GROUP BY, DISTINCT, or aggregate function, each column in the ORDER BY clause must be one of the columns explicitly SELECTed by the query. Column in error: <name>.

42000
-4121

In a query with a GROUP BY, DISTINCT, or aggregate function, each column in the ORDER BY clause must be one of the columns explicitly SELECTed by the query. Column in error: <name>. Table in scope: <name>.

42000
-4122

NULL cannot be assigned to NOT NULL column <name>.

42000
-4123

NULL cannot be cast to a NOT NULL data type.

42000
-4125

The select list of a subquery in a row value constructor, if the subquery is one of several expressions rather than the only expression in the constructor, must be scalar (degree of one).

42000
-4126

The row value constructors in a VALUES clause must be of equal degree.

42000
-4127

Type <type> cannot be assigned to type <type>.

42000
-4128

Cannot retrieve default volume and subvolume information from =_DEFAULTS define, DEFINEINFO error <num>.

42000
-4134

The operation (<name>) is not allowed. Try UNION ALL instead.

42000
-7003

A plan using cluster sampling could not be produced for this query.

42000
-8573

The user does not have <name> privilege on table or view <name>.

44000
-8104

The operation is prevented by the check on view <name> cascaded from the check option on <table-name>.

44000
-8105

The operation is prevented by the check option on view <name>.

46007
-11208

Specified signature is invalid. Reason: The list of parameter types must be enclosed in parentheses.

46007
-11209

Specified signature is invalid. Reason: the number of parameters <value> must match the number of parameters in Java method.

46007
-11210

Specified signature is invalid. Reason: Missing [ ] for OUT/INOUT parameter at position <value>.

46007
-11211

Specified signature is invalid. Reason: Unknown parameter type used at position <value>.

46007
-11212

Specified signature is invalid. Reason: Java signature size is more than supported.

46007
-11213

Specified signature is invalid. Reason: A return type must not be specified.

46101
-11215

Java execution: Invalid null input value at parameter position <value>.

46103
-11205

Java class <class-file-name> was not found in external path <path-name>.

HY011
-8855

Statement attribute cannot be set now.

HY011
-8857

Statement attribute cannot be set now. INPUT_ARRAY_MAXSIZE must be set before compiling the statement.

HY024
-8854

Invalid attribute value.

HY024
-8856

Invalid attribute value. INPUT_ARRAY_MAXSIZE must be positive.

HY092
-8853

Invalid attribute definition.

X0101
-1001

An internal error occurred in module <name> on line <num>. DETAILS(<text>).

X0102
-1002

Catalog <name> does not exist.

X0103
-1003

Schema <name> does not exist.

X0104
-1004

Table, view, or stored procedure <name> does not exist.

X0105
-1005

Constraint <name> does not exist.

X0106
-1006

Index <name> does not exist.

X0108
-1008

User name <name> does not exist.

X0109
-1009

Column <name> does not exist in the specified table.

X010G
-1016

Redundant references to column <name> in the constraint.

X010H
-1017

You are not authorized to perform this operation.

X010J
-1019

Cannot find a valid primary partition for <name>.

X010K
-1020

Privilege settings on metadata tables cannot be changed.

X010L
-1021

SQL is already initialized on system <name>.

X010M
-1022

Schema <name> already exists.

X010N
-1023

Only the super ID user can name an authorization ID other than the current user name.

X010O
-1024

Distribution Service/Data Access Manager error <num> occurred in module <name> on line <num>. DETAILS(<text>).

X010P
-1025

Request failed. One or more dependent objects exist.

X010Q
-1026

Only the schema owner or the super ID user can drop a schema.

X010R
-1027

The definition schema <name> is dropped when its catalog is dropped.

X010S
-1028

Schema <name> contains at least one object. The schema must be empty.

X010T
-1029

Unable to create object <name>.

X010U
-1030

Unable to access object <name> (file error <num>).

X010V
-1031

Unable to drop object <name>.

X010Y
-1034

Unable to initialize SQL.

X010Z
-1035

Catalog <name> already exists.

X0110
-1036

Only the super ID can execute DROP SQL.

X0111
-1037

SQL is not installed on system <name>.

X0112
-1038

All catalogs have not been dropped from the system.

X0113
-1039

Unable to drop SQL.

X0114
-1040

Cannot alter metadata table.

X0115
-1041

The primary key has already been defined.

X0116
-1042

All PRIMARY KEY or UNIQUE constraint columns must be NOT NULL.

X0118
-1044

Unable to create constraint <name>. The referenced table does not contain a unique constraint.

X0119
-1045

The unique constraint cannot be used because it is deferrable.

X011A
-1046

Referenced and referencing column lists do not match for constraint <name>.

X011B
-1047

Unable to drop view <name> due to view being used by other objects.

X011D
-1049

Attempting to drop a NOT DROPPABLE constraint.

X011E
-1050

Cannot drop constraint used as a referenced object for a foreign key.

X011F
-1051

Insufficient privilege on <name>.

X011G
-1052

Trying to drop a constraint that does not belong to requested table.

X011H
-1053

Unique index <name> could not be created because the column(s) specified contain duplicate data.

X011I
-1054

Index <name> already exists.

X011J
-1055

Table, view, or stored procedure <name> already exists.

X011L
-1057

The DAM volume specified (<name>) is not available or is not audit protected.

X011M
-1058

Lock <name> already exists.

X011N
-1059

Request failed. Dependent constraint <name> exists.

X011P
-1061

Cannot drop metadata catalog <name>.

X011Q
-1062

Cannot drop metadata schema <name>.

X011R
-1063

Cannot drop metadata index <name>.

X011S
-1064

Cannot drop metadata view <name>.

X011T
-1065

Cannot create constraint <name> in metadata schema.

X011U
-1066

Cannot create index <name> in metadata schema.

X011X
-1069

Unable to drop schema <name>.

X011Y
-1070

Unable to create object <name> (file error <num>).

X011Z
-1071

Unable to access object <name> (file error <num>).

X0120
-1072

Unique constraint <name> is disabled; cannot create foreign key constraint <name>.

X0121
-1073

Only the super ID user can execute INITIALIZE SQL.

X0123
-1075

Catalog <name> contains at least one schema. The catalog must be empty.

X0125
-1077

Metadata table <name> does not contain information for view <name>.

X0126
-1078

The format of the specified location name <name> is invalid.

X0127
-1079

Unable to prepare the statement.

X0128
-1080

Duplicate references to column <name> in the create request.

X0129
-1081

Loading of index <name> failed unexpectedly.

X012A
-1082

Validation for constraint <name> failed unexpectedly.

X012B
-1083

Validation for constraint <name> failed; incompatible data exists in table.

X012C
-1084

Invalid default value for column <name>.

X012D
-1085

The calculated key length is greater than 255 bytes.

X012E
-1086

Lock <name> does not exist.

X012F
-1087

Lock cannot be granted, conflicting operation is in progress.

X012G
-1088

Cannot instantiate object <name>, conflicting lock exists.

X012M
-1094

Unable to drop object <name> because it is not a <name>.

X012N
-1095

The partition by column <name> should also be part of the clustering/storage key.

X012Q
-1098

Duplicate partition key (<name>) specified for object <name>.

X012R
-1099

Column <num> is unnamed. You must specify an AS clause for that column expression, or name all the columns by specifying a view column list.

X012S
-1100

Unable to select <name.schema.name>.

X012T
-1101

Unable to update <name.schema.name>.

X012U
-1102

Unable to insert rows into <name.schema.name>.

X012V
-1103

Unable to delete rows from <name.schema.name>.

X012W
-1104

Default value string too long for column <name>.

X012X
-1105   a

CREATE TABLE LIKE statement cannot contain both HORIZONTAL PARTITIONS and STORE BY clauses.

X012Y
-1106

The specified partition <name> of object <name> does not exist.

X0130
-1108

The number of columns specified in the view column list, <num>, does not match the degree of the query expression, <num>.

X0131
-1109

The WITH CHECK OPTION clause appears in the definition of view name, but the view is not updateable.

X0136
-1114

Unable to create catalog <name> metadata tables on <name>.

X0137
-1115

Unable to create label for <name> (file error <num>) <name>.

X0138
-1116

The current partitioning scheme requires a user-specified primary key on object <name>.

X0139
-1117

Cannot drop the only partition of the table. There must be at least two partitions available to perform the drop.

X013A
-1118

Cannot create object <name> in metadata schema.

X013B
-1119

Cannot drop metadata object <name>.

X013E
-1122

The number of specified partition key values (<num>) for object <name> exceeds the number of key columns used, <num>.

X013G
-1124

Schema <name> is an unknown version.

X013H
-1125

API request version number mismatch.

X013J
-1127

The specified table <name> is not a base table. Please verify that the correct table was specified.

X013K
-1128

Invalid API request. Details: <text>.

X013M
-1130

The column requires a default value.

X013O
-1132

An added column cannot have both DEFAULT NULL and NOT NULL.

X013P
-1133

Only the super ID can perform this operation.

X013Q
-1134

Concurrent DDL operations are being performed on the given object. The current operation cannot be performed.

X013R
-1135

Clustering key column <name> must be assigned a NOT NULL NOT DROPPABLE constraint.

X013T
-1137

Invalid index status. Details: <text>.

X013U
-1138

Invalid input parameter(s). Object name and status are required.

X013V
-1139

System-generated column <name> of base table <name> cannot appear in the search condition of a check constraint definition.

X013W
-1140

Row-length <num> exceeds the maximum allowed row-length of <num> for table <name>.

X013X
-1141

Could not obtain an up-and-audited DAM volume. Please check your system configuration.

X013Z
-1143

Validation for constraint <name> failed; incompatible data exists in referencing base table <name> and referenced base table <name>. To display the data violating the constraint, please use the following DML statement: <name>

X0140
-1144

Expected a quoted string in first key clause for column <name> on table <name>, value detected is (<name>).

X0141
-1145

The catalog name <name> is reserved for Trafodion metadata.

X0142
-1146

Unable to alter object <name> because it is not a <name>.

X0143
-1147

System-generated column <name> of base table <name> cannot appear in a unique or primary key constraint definition.

X0144
-1148

System-generated column <name> of base table <name> cannot appear in a referential integrity constraint definition.

X0151
-1181

Unable to drop object <name> (file error <num>).

X0152
-1182

Cannot instantiate constraint <name>, conflicting lock exists.

X0153
-1183

Cannot instantiate module <name>, conflicting lock exists.

X0154
-1184

Insufficient privilege on <name>.

X0155
-1185

The location name is either invalid or missing.

X0157
-1187

The schema name <name> is reserved for Trafodion metadata.

X0158
-1188

Unable to create referential integrity constraint <name> for table <name> due to circular dependency: <name>.

X0166
-1222

Invalid file type <type>.

X0168
-1224

Invalid data type for routine param <name>.

X0169
-1225

Error on access to PROCS table. Trafodion error <integer>.

X016A
-1226

Error on access to PARAMS table. Trafodion error <integer>.

X016F
-1231

Unable to create user-defined routine <routine-name>.

X0200
-2000

Error messages for compiler main, IPC, and DEFAULTS table; assertions for optimizer.

X0201
-2001

Error or warning <num> occurred while opening or reading from DEFAULTS table <name>. Using <name> values.

X0202
-2002

Internal error: cannot create MXCMP server.

X0203
-2003

Internal error: cannot establish connection with MXCMP server.

X0204
-2004

Internal error: error from MXCMP; cannot work on this query.

X0205
-2005

Internal error: from compilation, no errors in diagnostics yet for statement: <name>

X0206
-2006

Internal error: assertion failure (<name>) in file <name> at line <num>.

X0208
-2008

Internal error: out of virtual memory.

X020A
-2010

Internal IPC error.

X020B
-2011

Unable to create server process. Error <num> while resolving program file name <name>.

X020C
-2012

Unable to create server process <name>. Error <num>, TPC Error = <num>, error detail = <text>. (See procedure PROCESS_LAUNCH_ for details).

X020D
-2013

Unable to create server process <name>. error <num> on program file.

X020E
-2014

Unable to create server process <name>. error <num> on swap file.

X020F
-2015

Unable to create server process <name>. CPU is unavailable ( error <num>).

X020G
-2016

Server process <name> was started but had undefined externals.

X020H
-2017

Unable to create server process <name>. No more processes (PCBs) available.

X020I
-2018

Unable to create server process <name>. Library conflict.

X020J
-2019

Unable to create server process <name>. Unable to allocate virtual memory.

X020K
-2020

Unable to create server process <name>. Unlicensed privileged program.

X020L
-2021

System error <num> in <name> from <name>.

X020M
-2022

System error <num> in <name> from <name>, detail <text>.

X020N
-2023

Unable to create server process <name>. <name>.

X020P
-2025

Unable to create server process <name>. CPU is unavailable; <name>.

X020R
-2027

error <num> while sending a startup message to process <name>.

X020S
-2028

Unable to create OSS server process <name>. Insufficient resources.

X020T
-2029

Unable to create OSS server process <name>. OSS is not running.

X020U
-2030

Unable to create server process <name> via inetd (err no = <num>).

X020X
-2033

<text>: error <num> while communicating with process <name>.

X020Y
-2034

<text>: error <num> while communicating with server process <name>.

X020Z
-2035

<text>: Unable to open process <name> (err no = <num>).

X0211
-2037

<receiving-process>: A message from process <sending-process> was incorrectly formatted and could not be processed.

X021G
-2052

Optimizer internal counters: <name> <name> <name> <name>.

X021H
-2053

ASSERTION FAILURE CAUGHT BY OPTIMIZER! Attempting to recover and produce a plan.

X021N
-2059

Warnings while reading values from DEFAULTS table <name>.

X0221
-2073

Only the super ID user can compile system module <name>.

X0222
-2074

The name <name> is reserved for future system modules.

X0228
-2080

Error <num> while reading file: <num> bytes were read from <name> when <num> were expected in module <name>.

X0229
-2081

Error <num> while opening file <name> for read.

X022A
-2082

Error <num> while opening file <name> for write.

X022B
-2083

Error <num> while naming or locating file <name>.

X022C
-2084

Error <num> while writing <num> bytes to file <name>.

X022D
-2085

Error <num> while closing file <name>.

X022E
-2086

Unable to purge the file <name>. This file contains the results of a failed compilation and should be purged.

X022I
-2090

The command line argument for module name, <name>, is being ignored in favor of module name <name> in file <name>.

X022N
-2095

Module file <name>, expected to contain module <name>, instead contains <name>.

X022Q
-2098

The <name> compilation completed with <num> warnings.

X022R
-2099

The <name> compilation failed with <num> errors and <num> warnings.

X022S
-2100

Break was received. The compilation has been aborted.

X022T
-2101

Compilation failure due to internal error.

X022U
-2102

Unable to compile this query with 'MINIMUM' optimization level. Suggestion: Retry with 'MEDIUM' optimization level.

X022V
-2103

Unable to compile this query for one/both of the following reasons: a) Use of 'MINIMUM' optimization level, or b) Incompatible Control Query Shape specifications.

X022W
-2104

Unable to compile this query for one of two reasons: a) Incompatible Control Query Shape (CQS) specifications, or b) 'MEDIUM' optimization level is not sufficient to satisfy the CQS in effect. Suggestion: a) Inspect the CQS in effect; or b) Raise the optimization level to 'MAXIMUM'. Note that for this query, 'MAXIMUM' optimization level might result in a long compile time.

X022X
-2105

Unable to compile this query because of incompatible Control Query Shape (CQS) specifications. Suggestion: Inspect the CQS in effect.

X022Y
-2106

Unable to compile this statement since it is too long. Suggestion: Break up large statements into smaller pieces.

X022Z
-2107

Unable to compile this statement. Suggestion: Address the issue(s) raised in the reported warning(s).

X0230
-2108

Statement was compiled as if query plan caching were off.

X02P0
-2900

in file <name> at line <num>:

X0300
-3000

An internal error occurred in module <name> on line <num>. DETAILS(<text>).

X0344
-3148

Environment variable <name> is being ignored because this version of the code is Release, not Debug. Actual query results will likely not match expected results.

X034I
-3162

Procedure parameter <name> was not used.

X034J
-3163

Host variable <name> appears more than once in the INTO list. Execution results will be undefined.

X0352
-3182

Extra semicolon(;) in a compound statement.

X0400
-4000

Internal error in the query binder.

X0422
-4074

CONTROL QUERY successful.

X042U
-4102

The FIRST/ANY n syntax cannot be used with in an outermost SELECT statement.

X043G
-4124

More than one table will be locked: <name>.

X0446
-4150

Primary key of table expression <name> must be used for join with embedded <name> expression. Tables in scope: <name>.

X0447
-4151

Stream access supported only on updateable views <name>.

X0448
-4152

Table <name> cannot be both read and updated.

X0449
-4153

Statement might not compile due to an order requirement on stream expression.

X044A
-4154

Statement might not compile due to an order requirement on embedded <name> expression.

X044B
-4155

Secondary indexes don’t support order requirement. Table: <name>.

X044D
-4157

Inner relation of left join cannot be stream expression. Tables in scope: <name>.

X044E
-4158

Join of stream expressions not supported. Tables in scope: <name>.

X044F
-4159

Intersection of stream expressions not supported. Tables in scope: <name>.

X044G
-4160

Intersection between embedded <name> expression and embedded <name> expression not supported. Tables in scope: <name>, <name>.

X044H
-4161

Union between embedded <name> expression and embedded <name> expression not supported. Tables in scope: <name>, <name>.

X044I
-4162

Groupby not supported for stream expression. Tables in scope: <name>.

X044J
-4163

Groupby not supported for embedded <name> expression. Tables in scope: <name>.

X044K
-4164

Outer relation of right join cannot be embedded <name> expression. Tables in scope: <name>.

X044L
-4165

Outer relation of right join cannot be stream expression. Tables in scope: <name>.

X044M
-4166

ORDER BY clause not supported in UNION of two streams. Tables in scope: <name>, <name>.

X044N
-4167

Embedded <name> statements not supported in subqueries.

X044O
-4168

Stream expressions not supported in subqueries.

X044P
-4169

Embedded DELETE statements not allowed when using DECLARE . . . FOR UPDATE clause.

X044Q
-4170

Stream expressions not supported for insert statements.

X044R
-4171

Embedded <name> statements not supported in INSERT statements.

X044T
-4173

Stream expression not supported for top level UPDATE statements.

X044U
-4174

JOIN_ORDER_BY_USER prevented compiler from reordering query tree.

X044V
-4175

Join between embedded <name> expression and embedded <name> expression not supported. Tables in scope: <name>.

X044W
-4176

Join between stream expression and embedded <name> expression not supported. Tables in scope: <name>.

X044X
-4177

Update of <name> column <name> not permitted on rollback.

X044Y
-4178

Update of variable length column <name> not permitted on rollback.

X044Z
-4179

SEQUENCE BY not supported for stream expressions.

X0450
-4180

Stream expression not supported for top level DELETE statement.

X0451
-4181

Join with embedded <name> expression is not supported.

X0452
-4182

Selection predicate on any but the innermost correlation name of an embedded <name> expression is not supported.

X045K
-4200

Stream expressions not supported for compound statements.

X045L
-4201

Embedded <name> expression not supported for compound statements.

X045M
-4202

SEQUENCE BY not supported for embedded <name> expressions.

X045N
-4203

INSERT/UPDATE/DELETE operation on nonaudited table <name> requires index maintenance which might cause the index(es) to become corrupt.

X045O
-4204

Stream access supported only for key-sequenced tables. Table: <name>.

X045P
-4205

Embedded <name> supported only for key-sequenced tables. Table: <name>.

X045Q
-4206

Embedded <name> supported only for updateable views. View: <name>.

X045R
-4207

Index <name> and other indexes covering a subset of columns do not cover all output values of stream.

X045S
-4208

Index <name> and other indexes covering a subset of columns do not cover all columns referenced in where clause of stream.

X045T
-4209

Update of nullable column <name> not permitted on rollback.

X045U
-4210

Embedded UPDATE/DELETE statements are not supported within an IF statement.

X045W
-4212

<table-name> cannot be used to satisfy order requirement on the stream because it is partitioned.

X045X
-4213

Use of rowsets in a predicate with embedded UPDATE/DELETE not supported.

X045Y
-4214

The SET ON ROLLBACK clause is not allowed on a nonaudited table. Table: <name>.

X045Z
-4215

Stream access is not allowed on a nonaudited table. Table: <name>.

X0460
-4216

The FIRST/ANY n syntax cannot be used with an embedded update or embedded DELETE statement.

X0461
-4217
X048C
-4300

Invalid usage of procedure <procedure-name> - A UDR was invoked within a trigger.

X048E
-4302

Procedure <procedure-name> expects <value-1> parameters but was called with <value-2> parameters.

X048F
-4303

The supplied type for parameter value of routine <routine-name> was <type-name-1> which is not compatible with the expected type <type-name-2>.

X048G
-4304

Host variable or dynamic parameter <parameter-name> is used in more than one OUT or INOUT parameter for routine routine-name. Results might be unpredictable.

X048H
-4305

Parameter <value> for used defined routine <routine-name> is an OUT or INOUT parameter and must be a host variable or a dynamic parameter.

X048I
-4306

A CALL statement is not allowed within a compound statement.

X048J
-4307

Rowset parameters are not allowed in a CALL statement.

X048K
-4308

Internal error: unsupported SQL data type <value> specified for a CALL statement parameter.

X0500
-5000

Internal error in the query normalizer.

X0600
-6000

Internal error in the query optimizer.

X0602
-6002

The metadata table HISTOGRAMS or HISTOGRAM_INTERVALS contains invalid values. If you have manually modified the metadata table, then you should undo your changes using the CLEAR option in UPDATE STATISTICS.

X0607
-6007

Multi-column statistics for columns <name> from table <name> were not available; as a result, the access path chosen might not be the best possible.

X0608
-6008

Statistics for column <name> were not available; as a result, the access path chosen might not be the best possible.

X0700
-7000

Internal error in the code generator in file <name> at line <num>: <text>.

X0701
-7001

Invalid default value <name> for column <name>.

X0801
-8001

Internal executor error.

X0802
-8002

The current nowaited operation is not complete.

X0803
-8003

The descriptor is locked by another nowaited operation.

X0806
-8006

The stream timed out, but the cursor is still open.

X0807
-8007

The operation has been canceled.

X080A
-8010

Default catalog name: <name>. Default schema name: <name>.

X080B
-8011

SELECT statement inside compound (BEGIN . . . END) statement returns more than one row.

X080C
-8012

Encoding of CONTROL QUERY DEFAULTs: <name>.

X080E
-8014

A SELECT statement within compound statement did not return any row.

X080G
-8016

An attempt was made to access <name> which has a system version that is incompatible with the version of the accessing software.

X080H
-8017

Explain information is not available for this query.

X080J
-8883
X08P1
-8901

The MXUDR server for this statement is no longer running. The statement will be assigned a new MXUDR server if it is executed again.

X08P2
-8902

Internal error: MXUDR returned an invalid UDR handle.

X08P3
-8903

An attempt was made by Trafodion to kill the MXUDR server for this statement <process-name>. PROCESS_STOP_ returned <value>.

X08P4
-8904

Unable to receive reply from MXUDR, possibly caused by internal errors while executing user-defined routines.

X08P6
-8906

An invalid or corrupt MXUDR reply could not be processed, possibly due to memory corruption in MXUDR while executing friendly user-defined routines or an internal error in Trafodion.

X082S
-8100

Define <name> does not exist

X08O4
-8868

Unable to create context when current transaction is implicitly started by SQL.

X08O5
-8869

The specified file number is not a QFO, or the file number is not internally associated with a QFO object (CLI internal error).

X08O6
-8870

The current statement is not associated with any QFO.

X08O7
-8871

Nowait tag is not specified in the <statement-id>.

X08O8
-8872

Unable to execute a new operation while there is another nowaited operation pending.

X08O9
-8873

The current statement is already associated with a QFO.

X08OG
-8880

Cannot remove the current context.

X08OH
-8881

The specified CLI context handle is not found

X08OI
-8882

Containing SQL not permitted.

X08OJ
-8883

The current context has violation checking functions disabled. Use SQL_EXEC_SetUdrAttributes_Internal() to enable it.

X08OU
-8894

Argument <argument-name> of CLI function <function-name> is reserved for future use and must be set to <string> when calling the function.

X083W
-8140

Prohibited SQL statement attempted.

X083X
-8141

An error was artificially injected, to test error handling. File <name> at line <num>.

X088C
-8300

Late name resolution failed.

X088D
-8301

Late name resolution failed. File system error <num> on file <name>.

X088E
-8302

Late name resolution failed. SQLCODE error <num> from <name>.

X08BL
-8417

An error occurred during the evaluation of a USER function.

X08BR
-8423

The provided field number is not valid.

X08BT
-8425

NULL cannot be assigned to a DEFAULT NULL NOT NULL column.

X08BV
-8427

<text>

X08BW
-8428

The argument to function <name> is not valid.

X08BX
-8429

The preceding error actually occurred in function <name>.

X08FA
-8550

Error <num> was returned by the Data Access Manager.

X08FB
-8551

Error <num> was returned by the Distribution Service on <name>.

X08FC
-8552

Error <num> was returned by the Distribution Service while fetching the version of the system <name>.

X08FD
-8553

Stream overflow; subscription rate has fallen too far behind publishing rate.

X08FU
-8570

Insufficient memory to build query.

X08FV
-8571

Insufficient memory to execute query.

X08FW
-8572

The statement has incurred a fatal error and must be deallocated.

X08FY
-8574

An OPEN was blown away on table <name>.

X08FZ
-8575

Timestamp mismatch on table <name>.

X08G0
-8576

Statement was recompiled.

X08G1
-8577

Table, index, or view <name> not found.

X08G2
-8578

Similarity check passed.

X08G3
-8579

Similarity check failed: <name>

X08GP
-8601

Error returned from file system while locking/unlocking.

X08GQ
-8602

The file system reported error <num> on a lock/unlock operation.

X08JG
-8700

An assertion failure or out-of-memory condition occurred during parallel execution.

X08JQ
-8710

Error <num> returned by Measure when attempting to update SQL counters.

X08MG
-8808

Module file <name> contains corrupted or invalid data.

X08MH
-8809

Unable to open the module file <name>.

X08MN
-8815

Error while building the TCB tree when executing the statement.

X08MO
-8816

Error while executing the TCB tree.

X08MP
-8817

Error while fetching from the TCB tree.

X08MQ
-8818

Error from root_tdb describe.

X08MU
-8822

Unable to prepare the statement.

X08MV
-8823

Internal error: IO requests are waiting for <name> message in the IpcMessageStream.

X08MW
-8824

The input <module-id> does not have a module name.

X08MX
-8825

Module is already added into the current context.

X08MY
-8826

Unable to add the module.

X08MZ
-8827

Unable to send the request <name>.

X08N0
-8828

Out of memory while creating the <name>.

X08N2
-8830

There is no current context.

X08N3
-8831

Either no current context or the module to which the statement belongs is not added to the current context.

X08N6
-8834

Unable to find the installation directory. Operating system error <num>.

X08N7
-8835

Invalid SQL descriptor information requested.

X08N8
-8836

Invalid update column for cursor.

X08N9
-8837

Invalid user id.

X08NA
-8838

Unable to receive reply from MXCMP, possibly caused by internal errors when compiling SQL statements, processing DDL statements, or executing the built in stored procedures.

X08NC
-8840

Object name provided to CLI is invalid.

X08NE
-8842

The cursor, <name>, referenced by this statement is not found or is not updateable.

X08NH
-8845

Internal error: root_tcb is null.

X08NI
-8846

Empty SQL statement.

X08NN
-8851

CLI Parameter bound check error.

X08NO
-8852

Holdable cursors are supported only for streaming cursors and embedded UPDATE/DELETE cursors.

X08NU
-8858

The value: (<num>) passed in through input a host variable/parameter is an invalid SQL identifier

X08NV
-8859

There are pending insert, delete, or update operations.

X08NW
-8860

Module file <name> has obsolete module header.

X08NX
-8861

Module file <name> has obsolete descriptor location table header.

X08NY
-8862

Module file <name> has obsolete descriptor location table entry.

X08NZ
-8863

Module file <name> has obsolete descriptor header.

X08O0
-8864

Module file <name> has obsolete descriptor entry.

X08O1
-8865

Module file <name> has obsolete procedure location table header.

X08O2
-8866

Module file <name> has obsolete procedure location table entry.

X08O3
-8867

Error while reading from file <name>.

X08OQ
-8890

The SQL compiler failed to initialize properly. Query results might differ from what is expected, due to different compiler defaults.

X08OR
-8891

Non-ASCII character host variable type for <name> field.

X08OX
-8897

RPC exception in CLI request from non-trusted shadow client to trusted shadow server.

X08OY
-8898

Internal error in CLI.

X095K
-9200

UPDATE STATISTICS encountered an error from <name>.

X095L
-9201

Unable to DROP object <name>.

X095M
-9202

UPDATE STATISTICS has located previously generate histogram that are not being regenerated. This might affect the plans that will be generated. Missing column lists are <column-list>.

X095N
-9203

Column names must be unique when specified in column list: (<name>).

X095O
-9204

The range of interval count is from 1 to 200.

X095P
-9205

UPDATE STATISTICS for object <name> is not supported.

X095Q
-9206

You are not authorized to read/write object <name>. Verify that you have the necessary access privileges.

X095R
-9207

You are not allowed to generate histogram statistics on an ISO88591 CHARACTER SET column which contains a null terminator character. You need to exclude this column from the column group list in UPDATE STATISTICS.

X095S
-9208

Unable to access column definitions.

X095T
-9209

Column name <name> does not exist in the table.

X095U
-9210

One of the column data types is not supported by UPDATE STATISTICS. You need to exclude this column from the column group list in UPDATE STATISTICS.

X095W
-9212

Cardinality statistics will be more accurate if you use SET ROWCOUNT option in the SAMPLE clause.

X095X
-9213

If you intend to update histogram statistics for columns, you must specify a column group list in the statement.

X095Y
-9214

Unable to create object <name>.

X095Z
-9215

UPDATE STATISTICS encountered an internal error (<location>).

X0A01
-10001

Sort Error: No error text is defined for this error.

X0A03
-10003

Sort Error: Warning: Scratch File EOF

X0A04
-10004

Sort Error: Merge is disallowed for Sort

X0A05
-10005

Sort Error: Unexpected error value. Check error

X0A06
-10006

Sort Error: Previous IO failed

X0A07
-10007

Sort Error: Error writing to Scratch File

X0A08
-10008

Sort Error: Invalid sort algorithm selected

X0A0A
-10010

Sort Error: Run number is invalid

X0A0B
-10011

Sort Error: Error reading Scratch File

X0A0C
-10012

Sort Error: Scratch Block number is invalid

X0A0D
-10013

Sort Error: No fixed disks to sort on

X0A0E
-10014

Sort Error: No memory to allocate scratch space

X0A0F
-10015

Sort Error: PROCESSHANDLE_GETMINE_ failed

X0A0G
-10016

Sort Error: PROCESSHANDLE_DECOMPOSE_ failed

X0A0H
-10017

Sort Error: DEVICE_GETINFOBYLDEV_ failed

X0A0I
-10018

Sort Error: FILENAME_FINDSTART_ failed

X0A0J
-10019

Sort Error: FILENAME_FINDNEXT_ failed

X0A0K
-10020

Sort Error: FILENAME_FINDFINISH_ failed

X0A0L
-10021

Sort Error: FILE_GETINFOLISTBYNAME_ failed

X0A0M
-10022

Sort Error: FILE_CREATE failed

X0A0N
-10023

Sort Error: FILE_OPEN_ failed

X0A0O
-10024

Sort Error: SetMode failed

X0A0P
-10025

Sort Error: FileClose failed

X0A0Q
-10026

Sort Error: AWAITIOX failed

X0A0R
-10027

Sort Error: FILE_GETINFOLIST failed

X0A0S
-10028

Sort Error: POSITION failed

X0A0T
-10029

Sort Error: FILE_GETINFO_ failed

X0A18
-10044

Sort Error: IO did not complete

X0A1B
-10047

Sort Error: Wrong length read

X0B2T
-11101

MXUDR: Unknown message type: <value>.

X0B2V
-11103

MXUDR: Invalid routine handle: <string>.

X0B2W
-11104

MXUDR: CLI Error: <error-text>.

X0B2X
-11105

MXUDR: Invalid Language Manager param mode. Parameter <parameter-value>.

X0B30
-11108

MXUDR: Unable to allocate memory for object <object-name>.

X0B32
-11110

MXUDR: Unexpected error during message processing: <string>.

X0B33
-11111

MXUDR: Internal error: <value>.

X0B35
-11113

MXUDR: Internal error: An unexpected UNLOAD request arrived for UDR handle <string>.

X0B5L
-11201

Language Manager initialization failed. Details: Error occurred while loading Java System Class <class-name>.

X0B5M
-11202

Language Manager initialization failed. Details: Unable to initialize JVM.

X0B5N
-11203

The Language Manager failed to create its class loader, possibly due to corrupt LmClassLoader.class file.

X0B5Q
-11206

Java class <class-file-name> was not found in external path <path-name>.

X0B5R
-11207

Java class <class-file-name> failed to initialize.

X0B60
-11216

Java execution: Data overflow occurred while retrieving data at parameter position <parameter-number>.

X0B61
-11217

Java execution: Data overflow occurred while retrieving data at parameter position <parameter-number>. Value is truncated.

X0B63
-11219

Specified signature is invalid. Reason: the number of parameters <value> must match the number of parameters in Java method.

X0B65
-11221

Specified signature is invalid. Reason: Missing [ ] for OUT/INOUT parameter at position <value>.

X0B66
-11222

Specified signature is invalid. Reason: Unknown parameter type used at position <value>.

X0B67
-11223

Language Manager encountered internal error <detail-text>.

X0B68
-11224

JVM raised an exception. Details: <detail-text>.

X0B69
-11225

Specified signature is invalid. Reason: Unknown or unsupported type used as a return type.

X0B6A
-11226

Java execution: Invalid null input value at parameter position <value>.

X0B6B
-11227

Java execution: Data overflow occurred while retrieving data at parameter position <value>.

X0B6C
-11228

Floating point conversion error <detail-text>.

X0D01
-13001

Java execution: Data overflow occurred while retrieving data at parameter position <value>. Value is truncated.

X0D04
-13004

A Java method completed with an uncaught Java exception. Details: <string>.

X0D05
-13005

A Java method completed with an uncaught java.sql.SQLException. Details: <string>.

X0D06
-13006

A Java method completed with an uncaught java.sql.SQLException with invalid SQLSTATE. The uncaught exception had an SQLCODE of <SQLCODE-value> and SQLSTATE of <SQLSTATE-value>. Details: <string>.

X0D07
-13007

Language Manager is out of memory <string>.

X0D08
-13008

The operation failed because the Java Virtual Machine ran out of memory.

X0D09
-13009

Language Manager encountered internal error <string>.

X0D0A
-13010

JVM raised an exception. Details: <string>.

X0D0B
-13011

Specified signature is invalid. Reason: The Java signature for a Java main method must be (java.lang.<string>[ ]).

X0D0C
-13012

All SQL parameters associated with a Java main method must have a parameter mode of IN.

X0D0D
-13013

All SQL parameters associated with a Java main method must be an SQL character type.

X0D0E
-13014

Unable to open the output source file <name>.

X0D0F
-13015

Unable to open the module definition file <name>.

X0D0G
-13016

Descriptor name <name> conflicts with SQLC default name <name>.

X0D0H
-13017

Descriptor <name> is multiply defined.

X0D0I
-13018

Descriptor name <name> is invalid.

X0D0J
-13019

Statement name <name> uses <name>, a reserved name SQLC generates.

X0D0K
-13020

Statement name <name> is multiply defined.

X0D0L
-13021

<name> is already defined.

X0D0M
-13022

Cursor <name> is already defined.

X0D0N
-13023

<name> is already defined as a dynamic cursor.

X0D0O
-13024

Cursor <name> was not declared.

X0D0Q
-13026

The EXEC SQL MODULE statement must precede any cursor definitions or executable SQL statements.

X0D0R
-13027

Only one EXEC SQL MODULE statement is allowed.

X0D0S
-13028

Cannot open static cursor <name> because <name> is out of scope at time of open.

X0D0T
-13029

<line-number-detail-text>

X0D0U
-13030

<line-number-detail-text>

X0D0V
-13031

Expecting a single host variable of type string.

X0D0W
-13032

Not expecting input host variables for static cursor <name>.

X0D0X
-13033

Host variable <name> is in different scope than when cursor <name> was declared.

X0D0Z
-13035

Invalid line number <num> for line pragma; ignoring the rest.

X0D12
-13038

Array size <name> expected to be an unsigned integer near line <num>.

X0D13
-13039

Function definition is not allowed within an SQL declare section near line <num>.

X0D14
-13040

Expecting ")" near line <num>.

X0D16
-13042

Unnamed declaration near line <num>.

X0D17
-13043

Expecting <name> near line <num>.

X0D18
-13044

Type specification <type> is not a recognized type near line <num>.

X0D19
-13045

Unexpected class declaration near line <num> ignored.

X0D1A
-13046

Expecting "}" to end member declaration near line <num>.

X0D1B
-13047

Undefined tag <name> near line <num>.

X0D1C
-13048

Tag <name> redefined near line <num>.

X0D1D
-13049

Input file not good near line <num>.

X0D1E
-13050

Cursor <name> not closed.

X0D1F
-13051

Cursor <name> not opened.

X0D1G
-13052

Cursor <name> not fetched.

X0D1H
-13053

Cursor <name> not opened or closed.

X0D1I
-13054

Cursor <name> not fetched or closed.

X0D1J
-13055

Cursor <name> not opened or fetched.

X0D1K
-13056

Cursor <name> not used.

X0D1L
-13057

End-of-file processing generated unexpected cursor status of <num> for cursor <name>.

X0D1M
-13058

Unable to open SQL CLI header file <name>.

X0D1O
-13060

Unable to open the listing file <name>.

X0D1P
-13061

Invalid NUMERIC precision specified near line <num>.

X0D1Q
-13062

Unsigned long long type not allowed near line <num>.

X0D1R
-13063

Identifier <name> not defined near line <num>.

X0D1S
-13064

Identifier <name> is not a member of struct <name> near line <num>.

X0D1T
-13065

End of file was found after <name> when <name> was expected, near line <num>.

X0D1U
-13066

Identifier <name> was expected to be a structure type near line <num>.

X0D1V
-13067

Unable to open source file <name>.

X0D1X
-13069

Missing module specification string argument after -g option.

X0D1Y
-13070

Module Group Specification String <MVSS-string> is not a Regular Identifier, or is longer than 31 characters.

X0D1Z
-13071

Module Tableset Specification String <MTSS-string> is not a Regular Identifier, or is longer than 31 characters.

X0D20
-13072

Module Version Specification String <MVSS-string> is not a Regular Identifier, or is longer than 31 characters.

X0D21
-13073

Module name <module-name> is not a value OSS file name, or is longer than 128 characters.

X0D22
-13074

One or more of the first three parts of the externally qualified module name <module-name> is longer than 128 characters.

X0D23
-13075

Externally qualified module name <module-name> is not a Regular Identifier, or is longer than 248 characters.

X0D24
-13076

Catalog name <catalog-name> is not a valid OSS file name, or is longer than 128 characters.

X0D25
-13077

Schema name <schema-name> is not a valid OSS file name, or is longer than 128 characters.

X0DDW
-13500

SQLCO errors

X0DDX
-13501

Invalid command option <name>.

X0DDY
-13502

Source file name must be specified.

X0DDZ
-13503

Missing filename for command option <name>.

X0DE0
-13504

Missing timestamp command option.

X0DE1
-13505

Source input file <name> cannot be opened.

X0DE2
-13506

COBOL output source file <name> cannot be opened.

X0DE3
-13507

Error while parsing source: <name>.

X0DE4
-13508

Expecting <name>, found <name>.

X0DE5
-13509

Expecting <name> after <name>, found <name>.

X0DE6
-13510

The SQL declare section might not contain COPY or REPLACE.

X0DE7
-13511

End of input file while processing EXEC SQL.

X0DE8
-13512

Input file error while processing EXEC SQL.

X0DE9
-13513

The BIT data type is not implemented in Trafodion.

X0DEA
-13514

The CHARACTER SET attribute is not implemented in Trafodion.

X0DEB
-13515

Picture <name> is not valid for a host variable.

X0DEC
-13516

Unexpected end of input file encountered after line <num>.

X0DED
-13517

Line <num> is too long to process and has been truncated.

X0DEE
-13518

Line <num> cannot be interpreted as a COBOL line type.

X0DEF
-13519

Line <num> contains an unterminated character literal.

X0DEG
-13520

Line <num> does not correctly continue a character literal.

X0DEH
-13521

Line <num>: DISPLAY host variables must be SIGN LEADING SEPARATE.

X0DEI
-13522

DECLARE SECTION cannot be nested.

X0DEJ
-13523

END DECLARE SECTION without a matching BEGIN DECLARE SECTION.

X0DEK
-13524

DECLARE SECTION encountered in unexpected program section.

X0DEL
-13525

Variable <name> might not be allocated correctly for a host variable.

X0DEM
-13526

Line <num>, <name>: <name> clause is not valid for a host variable.

X0DEN
-13527

The first declaration in an SQL DECLARE SECTION must have level 01 or 77.

X0DEO
-13528

Line <num>: Variable <name> is not alphabetic and cannot have a CHARACTER SET clause.

X0DEP
-13529

Missing END DECLARE SECTION detected at line <num>.

X0DM8
-13800

Line <num>: <name> is not a valid character set name.

X0F00
-15000

SQLCI error messages.

X0F04
-15004

Error <num> on change directory attempt to <name>.

X0F06
-15006

Error <num> while reading from file.

X0F07
-15007

Error <num> while opening file <name>.

X0F08
-15008

The specified statement does not exist in the history buffer.

X0F09
-15009

The requested help topic is too long.

X0F0A
-15010

The help file could not be opened.

X0F0B
-15011

No help is available for the requested topic.

X0F0C
-15012

File read error on the help file.

X0F0E
-15014

Section <name> not found in file <name>.

X0F0I
-15018

Break was received. The last statement might be lost.

X0F0Q
-15026

Break rejected.

X0F0R
-15027

SQL statement not ready. Try Break later.

X0F0S
-15028

Break error.

X0F0T
-15029

Operation failed due to insufficient memory.

X0F0U
-15030

The specified define already exists. Use alter or delete and add.

X0F0V
-15031

The specified define does not exist.

X0F0W
-15032

An error occurred while adding, altering or deleting this define.

X0F0X
-15033

Break was received.

X0F0Y
-15034

Invalid LOG file name.

X0F0Z
-15035

Permission denied to access this file

X0F10
-15036

Invalid filecode OR invalid function argument

X0FRR
-15999

SQLCI internal error.

X0G00
-16000

Error message file not found.

X0G01
-16001

No message found for error or warning <sqlcode>.

X0J00
-19000

Internal error in internal stored procedure processing.

X0J01
-19001

Error in field description of internal stored procedure.

X0J02
-19002

No such internal stored procedure: <name> defined.

X0J03
-19003

Internal stored procedure failed without any error information returned.

X0J0K
-19020

Stored procedure <name> expects <num> input parameters.

X0J0L
-19021

Stored procedure <name> returns with error: <text>.

X0K00
-20000

SQL Utilities error messages.

X0K31
-20109

<text>

X0P01
-25001

Program <executable>, executing on <node>, has encountered a version error.

X0P2S
-25100

Remote node <node> runs an incompatible version of Trafodion. The Trafodion version (version) of node is <version-1>, the local node does not support versions older than <version-2>.

X0P2T
-25101

Remote node <node> runs an incompatible version of Trafodion. The Trafodion version (version) of <node> is <version-1>, the local node supports only version <version-2>.

X0P2U
-25102

Remote node <node> runs a version of Trafodion which cannot interoperate with other versions. The Trafodion version (version) of <node> is <version-1>.

X0P8C
-25300

Module <module> had module version <version-1>; node <node> does not support module versions lower than <version-2>.

X0P8D
-25301

Module <module> had module version <version-1>; the local node does not support module versions higher than <version-2>.

X0P8I
-25306

A required system module has module version <version-1>; node <node> does not support query plans from modules with module version lower than <version-2>.

X0P8J
-25307

The query plan can be executed only by a node with Trafodion version (version) <version-1>, the version of <node> is <version-1>.

X0P8K
-25308

The query plan has plan version <version-1>, the local Trafodion version (version) can execute only query plans with plan version <version-1>.

X0P8L
-25309

Module <module> can be executed only by a node with Trafodion version (version) version1, the version of <node> is <version-1>.

X0P8M
-25310

Module <module> has module version <version-1>, the local Trafodion version (version) can execute modules only with module version <version-1>.

X0P8N
-25311

System module <module> has a wrong module version. The expected module version is <version-1>. The actual module version is <version-2>.

X0U08
-30008

Internal error. Rowset index is out of range.

X0U09
-30009

Internal error. Trying to add more elements than maximum rowset size.

X0U0A
-30010

Internal error. Rowset is corrupted.

X0U0B
-30011

More than one INTO statement in the same query is not supported.

X0U0C
-30012

Rowset index <name> must be specified last in the derived column list of <name>.

X0U0D
-30013

Hostvar used to set input size of rowset has zero or negative value.

X0U0E
-30014

Hostvar used to set input size of rowset is not of type short, int, or long.

X0U0K
-30020

Embedded UPDATE/DELETE cannot be used with SELECT. . .INTO and rowset.

XW02S
-100

The "no data" completion condition (SQLCODE = +100).

XW10C
-1012

No privileges were granted. You lack grant option on the specified privileges.

XW10D
-1013

Not all privileges were granted. You lack grant option on some of the specified privileges.

XW10F
-1015

Some of the specified privileges could not be revoked.

XW82Y
-8106

The last row fetched by this cursor was updated or deleted between the FETCH and UPDATE/DELETE. . .WHERE CURRENT. . . of statements.

12. File-System Errors

Some error messages generated by the Trafodion platform include file-system error codes. For example:

SQL 1024

File system error <error-number> occurred on <text-string-1>. <text-string-2>.

This section lists all file-system error codes and provides the corresponding error text for each code number. The error text can sometimes help you troubleshoot a problem. If the initial error message and file-system error text are insufficient to help you solve a problem, or if you need more information, contact user@trafodion.incubator.apache.org.

Error Text
0000

The operation completed successfully.

0001

A read procedure reached end-of-file or a write procedure reached end of tape.

0002

The operation specified is not allowed on this type of file.

0003

An open or purge of a partition failed.

0004

An open operation for an alternate key file failed.

0005

Sequential buffering not used because no space was available in the process-control buffer for the sequential block buffer.

0006

A system message was received from another process.

0007

This process cannot accept a command because the receiving file is not opened correctly.

0008

The operation was successful (examine message control word for additional status).

0009

A read through a locked record was successful.

0010

The new record or file could not be created because a file by that name or a record with that key already exists.

0011

The file is not in the directory or the record is not in the file, or the specified tape file is not on a labeled tape.

0012

The file is in use.

0013

The filename was not specified in proper form.

0014

That device does not exist on this segment.

0015

The disk or segment specified for a file RENAME operation does not match the name of the disk or segment of the file.

0016

No file with that file number has been opened.

0017

A paired-open was specified and the file is not open by the primary process, the parameters supplied do not match the parameters supplied when the file was opened by the primary, or the primary process is not alive.

0018

The segment specified does not exist in the network.

0019

There is no more space for devices in the logical device table.

0020

File name is too long to be opened across a network, or swap file or segment name is not acceptable.

0021

An illegal <count> was specified in a file-system call, or the operation attempted to transfer too much or too little data.

0022

The application parameter or buffer address is out of bounds.

0023

The disk address is out of bounds, or the maximum number of blocks in an alternate-key file is exceeded.

0024

Privileged mode is required for this operation.

0025

AWAITIO[X] or CANCEL attempted on file opened for waited I/O.

0026

AWAITIO[X] or CANCEL or CONTROL 22 attempted on a file with no outstanding I/O requests.

0027

An operation was attempted with outstanding no-waited I/O requests pending.

0028

The number of outstanding non-blocking operations would exceed that specified; an attempt was made to open a disk file or receiving file with the maximum number of concurrent operations more than 1; an attempt to ADD more than the configured maximum number of sub devices for an I/O process; or sync depth exceeds number the opener can handle; or trying to run more than 254 processes from the same program file.

0029

A required parameter is missing in a procedure call, or two mutually exclusive parameters were supplied.

0030

Message system is unable to obtain memory because either no entry is available in the message block pool or the maximum number of RECEIVE or SEND message blocks are already in use.

0031

Unable to obtain file-system buffer space.

0032

Unable to obtain storage pool space.

0033

I/O process is unable to obtain sufficient buffer space.

0034

Unable to obtain a file-system control block.

0035

Unable to obtain an I/O process control block, or the transaction or open lock unit limit has been reached.

0036

Unable to lock physical memory; not enough memory available.

0038

Attempt to perform operation on wrong type of system.

0039

The server process received a request with a sync ID older than the set of saved replies.

0040

The operation timed out. A command did not complete within the time specified by its <time-limit> parameter.

0041

A checksum error occurred on a file synchronization block.

0042

Attempt to read from unallocated extent.

0043

Unable to obtain disk space for file extent.

0044

The disk directory or device control table is full.

0045

The file is full; or two entries for <process-name> were already in the process pair directory.

0046

An invalid key was specified; key length passed to CREATE exceeds 255 bytes; or application failed to open an alternate-key file.

0047

The alternate key data is not consistent with primary file data.

0048

Security violation; illegal operation attempted.

0049

Access violation; attempt to use an unexpired labeled tape for output; or a mismatch between a DEFINE Use attribute (input or output/extend) and the current operation (read or write).

0050

Directory error on a disk.

0051

Directory on a disk is marked bad.

0052

Error in the disk free space table.

0053

File system internal error.

0054

I/O error in disk free space table or in Data Access Manager undo area.

0055

I/O error in disk directory; the file is no longer accessible.

0056

I/O error on disk label; the disk is no longer accessible.

0057

The disk free space table is full.

0058

The disk free space table is marked bad.

0059

The disk file is bad; there is a mismatch in the internal file control block, or the file structure in a structured file is inconsistent.

0060

The file resides on a removed disk, the device is stopped or not open, or a server has failed and a process has been replaced by a different process with the same name since the server was opened.

0061

No more file opens are permitted on this disk or device; the system administrator issued a STOPOPENS command or the number of open files reached the maximum allowed.

0062

The disk was mounted but no mount order was given, so the file open is not permitted.

0063

The disk was mounted and the mount is in progress, so a file open is not permitted.

0064

The disk was mounted and the mount is in progress, so a file open is not permitted.

0065

Only special requests permitted - or special request to RAID-1 disk pair attempted with only one device in special state.

0066

The device is stopped, a hard failure occurred on the controller, the disk and controller are not compatible, or both halves of a RAID-1 disk are down.

0070

Continue the file operation.

0071

A duplicate record was encountered.

0072

An attempt was made to access an unmounted or nonexistent partition, or to access a secondary partition.

0073

The disk file or record is locked.

0074

The number of read updates without replies exceeds the receive depth.

0075

Requesting process has no current process transaction identifier.

0076

Transaction is in the process of ending.

0078

Transaction identifier is invalid or obsolete.

0079

A transaction attempted to update or delete a record which it has not previously locked.

0080

Invalid operation on protected file or non-protected disk.

0081

Operation is not valid for a transaction which still has non-blocking I/Os outstanding on a disk or process file.

0082

Transaction Services not running on this segment or on the remote segment.

0083

Attempt to begin more concurrent transactions than can be handled.

0084

Transaction Services has not been configured on this segment or on the remote segment.

0085

A device has not been started for Transaction Services.

0086

BEGINTRANSACTION is disabled either by the operator or because one or more Transaction Services limits have been reached.

0087

Waiting on a READ request and did not get it.

0088

A CONTROL READ is pending so a second READ is not valid.

0089

A remote device cannot accept text because it has no buffer available.

0090

The transaction was aborted by the system because its parent process died, a server using the transaction failed, or a message to a server using the transaction was canceled.

0091

A Transaction Services crash occurred during commitment of the transaction; the transaction may or may not have been committed.

0092

Distributed transaction aborted by system because the path to a remote segment that was part of the transaction was down.

0093

A transaction was aborted because it spanned too many transaction log files.

0094

A transaction was aborted by operator command.

0095

A transaction was aborted because of Data Access Manager process takeover by backup.

0096

The transaction was aborted because it exceeded the AUTOABORT timeout duration.

0097

Transaction aborted by call to ABORTTRANSACTION.

0098

Allocation of a Transaction Control Block failed because the local table is full, or the table on a remote segment is full.

0099

Process attempted to use features of a microcode option that is not installed on this segment.

0100

Device is not ready or the controller is not operational.

0101

The tape is write protected.

0102

Printer paper out, bail open or end of ribbon.

0103

Disk not ready due to power failure.

0104

No response from printer.

0105

Invalid printer vertical format unit buffer.

0106

A buffered WRITE has failed; data in printer buffer was lost.

0110

Only BREAK access is permitted.

0111

Operation aborted because of BREAK.

0112

READ or WRITEREAD preempted by operator message or too many user console messages.

0113

DEFINE class or attributes are not valid for the attempted function.

0119

Error code value was too large to fit into an 8-bit buffer; file-system error number is greater than 255.

0120

Data parity error, or attempt to access a tape whose density is higher than the switch setting on the tape drive.

0121

Data overrun error, hardware problem.

0122

Request aborted due to possible data loss caused by reset of circuit, bus sequence error; or Data Access Manager process takeover.

0123

Subdevice is busy.

0124

A line reset is in progress, loss of data is possible.

0130

Illegal disk address requested, or formatting error occurred.

0131

Write-check error from disk; internal circuitry fault.

0132

Seek incomplete from disk; cylinder address not reached after retry.

0133

Access not ready on disk; cylinder address not reached.

0134

Address compare error on disk.

0135

Write-protect violation with disk write.

0136

Disk unit ownership error (dual-port disk).

0137

Controller buffer parity error.

0138

Interrupt overrun; a device interrupted the processor before the software could respond.

0139

Controller error; internal diagnostic failure.

0140

Modem error (communication link not yet established, modem failure, momentary loss of carrier, or disconnect).

0148

Attempt to read unwritten data.

0150

End-of-tape marker detected.

0151

Runaway tape detected, or attempt to access a tape whose density is lower than the switch setting on the tape drive.

0152

Unusual end-tape unit went off-line.

0153

Tape drive power restored.

0154

BOT detected during backspace files or backspace records.

0155

Only nine-track magnetic tape allowed on this system.

0156

Tape command rejected.

0157

I/O process internal system error.

0160

Request is invalid for device state; protocol error.

0161

Impossible event occurred for line state.

0162

Operation timed out.

0163

EOT received or power at autocall unit is off.

0164

Disconnect received or data line is occupied (busy).

0165

RVI received or data line not occupied after setting call request.

0166

ENQ received or auto call unit failed to set present-next-digit.

0167

EOT received on line bid, or data-set-status not set

0168

NAK received on line bid, or auto-call unit failed to clear present-nextdigit after digit-present was set.

0169

WACK received on line bid, auto-call unit set abandon-call-and-retry, or station disabled or undefined.

0170

No ID sequence received during circuit assurance mode or invalid message control word entry number on write.

0171

No response received on bid/poll/select, or reply invalid.

0172

Reply not proper for protocol; invalid control sequence or invalid data.

0173

Maximum allowable NAKs received (transmission error), invalid message control word on WRITE, or invalid request ID.

0174

WACK received or bus frame aborted.

0175

Incorrect alternating ACK received, or command rejected.

0176

Poll sequence ended with no responder.

0177

Text overrun (insufficient buffer space for data transfer).

0178

No address list specified.

0179

Application buffer is incorrect, control request pending, or autopoll active.

0180

Unknown device status received.

0181

Sub device expected status information but received data instead.

0187

Operation returning with no useful data.

0188

Damage to logical flow of events.

0189

Response not yet available.

0190

Device error; hardware problem.

0191

Device power on, or terminal reset.

0192

Device in diagnose mode; system operator running diagnostics.

0193

Invalid or missing microcode file.

0194

Device use or mount request rejected by operator.

0195

Operation requires use of Tape Services but it is not running; tape operation is not allowed.

0196

A tape label record is missing or incorrect.

0197

An SQL error has occurred.

0198

A DEFINE of the given name could not be found.

0199

The disk file is protected by security software.

0200

The device is owned by an alternate port.

0201

The current path to the device is down, an attempt was made to write to a non-existent process, the message-system request was incorrectly formatted, or an error was found in the message system interface.

0210

Device ownership changed during operation.

0211

The node performing the operation failed during the operation.

0213

Channel data parity error (path error).

0214

Channel timeout (path error).

0215

I/O attempted to absent memory page (hardware path error).

0216

Memory breakpoint encountered during this I/O operation.

0217

Memory parity error during this I/O (hardware path error).

0218

Interrupt timeout occurred on a channel, or a controller, modem, or the line between, or lost the modem clock (path error).

0219

Illegal device reconnect (path error).

0220

Protect violation; an I/O controller attempted an illegal write.

0221

Controller handshake violation (path error).

0222

Bad channel status from EIO instruction (path error).

0223

Bad channel status from IIO instruction (path error).

0224

Controller error (fatal error).

0225

No unit assigned or multiple units assigned to the same unit number (path error).

0230

Node power failed, then restored.

0231

Controller power failed, then restored.

0232

Access is denied due to error in communication with the security monitor.

0233

Error in call to SERVERCLASS_SEND_.

0240

Network line handler error; operation not started. Ownership switch was performed.

0241

Network error; operation not started.

0246

External cluster bypass error; operation aborted.

0248

Network line handler error; operation aborted.

0249

Network error; operation aborted.

0250

All paths to the system are down.

0251

Network protocol error (path error).

0252

Required class is not available.

0255

Net line handler flooded; too many interrupts.

0512

An invalid parameter was specified.

0513

A file name was missing.

0514

The sequential I/O procedures do not support the specified device type.

0515

The specified access is invalid.

0516

The specified buffer address is invalid.

0517

The specified file code in the SET^FILE call does not match the file code of the file.

0518

The block buffer provided to OPEN^FILE is too small.

0519

The block length specified in the SET^FILE call does not match the block buffer length in OPEN^FILE.

0520

The specified record length was either too small or too large.

0521

The specified file is not a valid EDIT file.

0522

Either the SET^FILE or CHECK^FILE operation is not valid on an open file or OPEN^FILE was called for a file already open.

0523

An EDITREAD or EDITREADINIT error occurred.

0524

The specified file was not open.

0525

The requested operation was inconsistent with the access mode.

0526

The required operation failed because of insufficient stack space.

0527

The temporary buffer required for a non-blocking WRITE^FILE operation was not provided.

0530

The program called WRITE^FILE for the receiving file before calling READ^FILE.

0531

A call to CHECK^BREAK could not open the receiving file the receiving file was opened without calling OPEN^FILE.

0532

A non-blocking I/O operation has been restarted.

0533

An internal sequential I/O error occurred.

0534

A discrepancy was detected between the common file-control-block checksum and the previous checksum.

0535

A discrepancy was detected between the file file-control-block checksum and the previous checksum.

0541

A data structure version is incompatible with the requested operation.

0550

File operation attempted at illegal position.

0551

Duplicate exists for insertion-ordered alternate key.

0561

The item code in a list is not recognized.

0563

The size of an output buffer was too small.

0564

The operation is not supported for this file type.

0565

A malformed request was denied.

0566

This reply is malformed or not appropriate.

0567

The define used is incompatible for use with target system’s TOS version.

0570

An out-of-sequence message was received.

0571

A duplicate message was received.

0572

Message cannot be accepted because sequence number has been reset.

0573

The requested process handle cannot be returned.

0578

The block size specified is too large.

0579

The record size specified is too large for the given block size, file type and format.

0580

An open failed because the file was oversize and the opener did not specify use of 64-bit primary keys.

0581

An operation involving 32-bit primary keys was attempted on an open which specified use of 64-bit keys.

0582

Alternate key information could not be returned because it cannot be expressed in the superseded format of the parameter.

0583

An extent size specified is too large.

0584

The operation could not be performed because a software component does not support format-2 disk files.

0586

Transaction_Keep_ was attempted without a valid transaction dialog message.

0587

Transaction_Keep_ was called when there was already a kept transaction.

0588

There was no kept transaction but the operation required one.

0589

The operation could not be performed because there was a kept transaction.

0590

The parameter value is invalid or inconsistent with another.

0593

The request was canceled.

0594

A tape-catalog error was returned to Tape Services. Refer to the event log for detailed information.

0595

An error was returned to Tape Services. Refer to the event log for detailed information.

0597

A required item is missing from an item list.

0632

Not enough stack space to complete request.

0633

Operation is invalid because a performance measurement utility is running.

0634

A logical device number exceeded 16 bits.

0635

A disk cannot be accessed because the other side is locked.

0638

Process cannot be stopped until process returns to stopmode 1.

0639

Process cannot be stopped until process goes to stopmode 0.

0700

The sequence number of the message received by the Data Access Manager process from a recovery process does not match.

0701

The Data Access Manager process received a message from a recovery process that requires that the Data Access Manager process be in the STARTED state; it is currently in the STOPPED state.

0702

The Data Access Manager process received an erroneous message from a recovery process. The message requested a physical REDO and also requested that a transaction log be generated.

0703

The Data Access Manager process encountered a Creation Volume Sequence Number in a transaction-log record sent by a recovery process that is more recent than the CRVSN of the File Label.

0704

The Data Access Manager process encountered a Previous Volume Sequence Number in a transaction-log record sent by a recovery process that does not match the Volume Sequence Number of the data block on disk.

0705

Generated by the Data Access Manager process when it receives a Transaction Services Transaction Log Disk request type message and the Data Access Manager process is not an transaction-log disk.

0706

Generated by the Data Access Manager process when it receives a request message that is inappropriate for a Transaction Log Data Access Manager Process.

0707

Generated by the Data Access Manager process when the Disk Process Name Stamp (DPNameTimeStamp) in the message sent by a recovery process does not match the current DPNameTimeStamp of the disk.

0708

The Data Access Manager process encountered a File Label that had its UndoNeeded flag set when a recovery request specified that the UndoNeeded flag must not be set.

0709

The Data Access Manager process encountered a File Label that had its RedoNeeded flag set when a recovery request specified that the RedoNeeded flag must not be set.

0711

The Data Access Manager process received a corrupt transaction-log record in a message from a recovery process.

0751

A tape manager returned an error to Tape Services. Refer to the event log for detailed information.

0899

An attempt to switch nodes failed.

1024

The specified SQL subset is not defined to the file system.

1025

The supplied row or update value violates one of the constraints for the table.

1026

The selection expression on an SQL view has been violated.

1027

The Data Access Manager process encountered a bad SQL label or tree of labels.

1028

The Data Access Manager process accessed a label of an unexpected type during an OPEN or during an SQL label operation.

1029

A request to share an existing SQL open failed because no matching open was found.

1030

An invalid lock key length was specified for an SQL table.

1031

Some of the supplied values for DECIMAL or VARCHAR columns are invalid, or the supplied row is too long. Also, the disk process might have encountered a bad column in a stored row or a value in an update on a row that would change the length of a VARCHAR column in an entry-sequenced table.

1032

The SQL row description is inconsistent.

1033

The SQL key column description is inconsistent, or the specified key is too long.

1034

SQL internal error: The requested operation has failed because of an inconsistency in specifying the SQL catalog.

1035

SQL internal error.

1036

SQL internal error.

1037

SQL internal error.

1038

SQL internal error.

1039

An SQL UPDATE statement was attempted, but update intent was not specified when the cursor was declared.

1040

There is no current row. The cursor position is either before the first row of the set, after the last row, or between two rows.

1041

SQL internal error.

1042

The operation required a default value for a column that was defined as NO DEFAULT.

1043

SQL internal error.

1044

The operation is not allowed while an SQL cursor is open.

1045

SQL internal error.

1046

SQL internal error.

1047

The SQL index being used is marked invalid because the catalog manager has not successfully loaded it.

1048

SQL internal error.

1049

SQL internal error.

1050

SQL internal error.

1051

SQL internal error.

1052

A row was encountered that resides in a block having a data parity error. The row does not satisfy the WHERE clause.

1053

An ECC error or a checksum error occurred indicating that it is impossible to process the accessed block. No data is returned.

1054

Unable to access a non-protected table or protection view that has been altered by an uncommitted DDL statement.

1055

Unable to perform a utility operation while an uncommitted DDL operation from another transaction exists.

1056

Unable to access a table that is being recovered by Transaction Services.

1057

Unable to access a table that is being altered by another user.

1058

Unable to access a table that is being dropped by another user.

1059

Unable to access a protection view whose underlying table does not exist or is inconsistent.

1060

SQL internal error.

1061

The cursor is no longer defined in the Data Access Manager process.

1062

SQL internal error.

1063

SQL internal error.

1064

The table cannot be dropped because protection views are still defined for the table.

1065

This error message has two possible causes: 1) Either an SQL internal error has occurred. 2) An attempt was made to execute either an UPDATE WHERE CURRENT OF or DELETE WHERE CURRENT OF statement by using a cursor declared with the BROWSE ACCESS option.

1066

Internal error: Occurred in OPEN.

1067

Internal error: Occurred in the file system or Data Access Manager process OPEN protocol.

1068

SQL internal error.

1069

SQL internal error.

1070

The process’s program file is not licensed.

1071

SQL internal error.

1072

SQL internal error.

1073

SQL internal error.

1074

Internal error: SQL file system procedure.

1075

A FETCH was attempted following a FETCH that failed. This left the cursor in an undefined position.

1076

SQL internal error.

1077

The redefinition timestamp for a partition does not match the other partitions. This is a serious consistency failure.

1078

The disk process encountered an invalid row.

1079

The requested key compression option is inconsistent with the data type, offset in row, or descending flag of some of the key columns.

1080

The transaction ID does not match the current transaction ID for a protected table with a lock protocol or for a non-protected temporary table.

1081

SQL internal error.

1082

SQL internal error.

1083

An internal input SQL structure has an invalid format, as indicated by an incorrect EYE^CATCHER data item value. The program might have corrupted the SQL region or SQL executor segment, or an SQL internal error might have occurred.

1084

Unable to insert into an SQL view that does not allow insertions.

1085

SQL internal error or access incompatible SQL objects that were created on an SQL system with a later release date than the SQL system doing the accessing.

1086

Unable to unlock an SQL table that has locks through either STABLE ACCESS or REPEATABLE ACCESS.

1087

The SQL file system detected an internal disk process error.

1088

SQL internal error.

1089

SQL internal error.

1090

The requested SQL operation cannot be completed because of current limitations on message sizes.

1091

The file or table cannot be purged until the NOPURGEUNTIL date.

1092

The operation cannot be performed because the resulting disk directory entry would be too long. Too many columns, partitions, indexes, protection views, or constraints have been defined.

1093

The operation cannot be performed because the resulting row would exceed the RECLENGTH value defined for the relative table.

1094

The limit on the number of columns that can make up a key has been exceeded for indexes or key-sequenced tables.

1095

An invalid value has been supplied for the BLOCKSIZE attribute.

1096

The BLOCKSIZE value for this table is too small for the row length of the table.

1097

Unable to access an object that is off-line or has an inconsistent definition.

1098

The supplied MAXEXTENTS value is too large, or the total size of the partitions would exceed the largest allowable table size.

1099

The definitions of the table and/or index partitions are inconsistent, or the index label and corresponding underlying table values are inconsistent.

1100

An operand was truncated during assignment of character data.

1101

Truncation was needed, but prohibited during assignment of character data.

1102

An overflow occurred during expression evaluation.

1103

An underflow occurred during expression evaluation.

1104

An SQL column of type DECIMAL contained values that are not digits.

1105

Unable to assign a negative value to a column defined as unsigned.

1106

An unsigned numeric has a negative value.

1107

Division by zero occurred during expression evaluation.

1108

Data type of column not supported by this release.

1109

An invalid SQL data type was encountered.

1110

An operation between incompatible SQL types was requested.

1111

SQL internal error.

1112

Arithmetic operation was requested in an unexpected unsigned data type.

1113

Invalid operator value during expression evaluation.

1114

Invalid LIKE pattern during expression evaluation.

1115

A specified SYSKEY value exceeds the current defined size of the relative SQL table.

1116

The SQL file system aborted the transaction because an SQL statement could not be completed.

1117

Unable to use an undefined index.

1118

The specified view is not defined.

1119

The specified partition is not defined.

1120

SQL internal error.

1121

This error message has two possible causes: 1) A remote user specified local-only authority in the SECURE attribute for the object being created or altered. 2) The SECURE attribute did not grant read authority to all users being granted write authority.

1122

The supplied KEYTAG value is already defined for this table.

1123

SQL internal error.

1124

SQL internal error.

1125

SQL internal error.

1126

SQL internal error.

1127

Unable to update an SQL catalog table from a process that is not licensed.

1128

An operand was scale truncated during expression evaluation.

1129

Scale truncation was needed but prohibited during expression evaluation.

1130

Unable to use SQL on a system where the product is not installed.

3501

More control information was received than this dialect allows.

3502

Server does not have sufficient available storage for this request.

3503

Server does not support this dialect.

3504

Server does not support this request type.

3505

Server version is not current.

4001

Operation not permitted. Process does not have the appropriate privileges or permissions to perform the requested operation.

4002

No such file or directory.

4003

No such process or table entry.

4004

Interrupted system call.

4005

I/O error.

4006

No such device or address.

4007

Argument list too long.

4008

Exec format error.

4009

Bad file descriptor.

4010

No children.

4011

No more processes.

4012

Insufficient user memory.

4013

Permission denied.

4014

Bad address.

4016

Mount device busy.

4017

File already exists.

4018

Cross-device link.

4019

No such device.

4020

Not a directory.

4021

Is a directory.

4022

Invalid function argument.

4023

File table overflow.

4024

Maximum number of files already open.

4025

Invalid operation on terminal device.

4026

Object (text) file busy.

4027

File too large.

4028

No space left on device.

4029

Illegal seek.

4030

Read only file system.

4031

Too many links.

4032

Broken pipe or no reader on socket.

4033

Argument out of range.

4034

Value out of range.

4035

No message of desired type.

4036

Identifier removed.

4045

Deadlock condition.

4046

No record locks available.

4061

No data sent or received.

4099

Function not implemented.

4101

Operation would block.

4102

Operation now in progress.

4103

Operation already in progress.

4104

Socket operation on non socket.

4105

Destination address required.

4106

Message too long.

4107

Protocol wrong type for socket.

4108

Protocol not available.

4109

Protocol not supported.

4110

Socket type not supported.

4111

Operation not supported on socket.

4112

Protocol family not supported.

4113

Address family not supported.

4114

Address already in use.

4115

Can’t assign requested address.

4116

Network is down.

4117

Network is unreachable.

4118

Network dropped connection on reset.

4119

Software caused connection abort.

4120

Connection reset by remote host.

4121

No buffer space available.

4122

Socket is already connected.

4123

Socket is not connected.

4124

Can’t send after socket shutdown.

4126

Connection timed out.

4127

Connection refused.

4128

Host is down.

4129

No route to host.

4131

File name too long.

4132

Directory not empty.

4180

Invalid data in buffer.

4181

No reply in buffer.

4182

Partial buffer received.

4183

Interface error from SPI.

4184

Version mismatch.

4185

XDR encoding error.

4186

XDR decoding error.

4195

Out-of-band data available.

4196

Invalid socket call.

4197

File type not supported.

4198

C file (code 180) not odd unstructured.

4199

Insufficient internal memory.

4200

Too many symbolic links during path name resolution.

4201

File-set catalog internal consistency error.

4202

Root file set is not mounted.

4203

POSIX not running or not installed.

4204

Illegal byte sequence.

4205

Process is not common runtime-environment (CRE) compliant but requests a service that depends on CRE.

4206

Illegal service requested.

4207

An unexpected OSS subsystem error occurred.

4208

Illegal operation attempted on file descriptor.

4209

Logic error.

4211

Current working directory or filename longer than PATH_MAX.

4212

An error occurred during invocation of a DEFINE procedure.

4213

A cross node exec has been attempted while holding a semaphore.

4214

An invalid message tag had been encountered when setlocale_from_msg() function was called. There was no corresponding message for the message tag.

4215

Positioning of a file directory failed because there were more than 65535 names in the directory beginning with the same first two characters.

4216

The function is supported but not for the referenced object type.

4217

Socket transport server not running.

4218

Message queue server not running.

4219

Terminal Helper process not running.

4220

An operation was attempted on a large file using a small file I/O API.